Cooper Lighting LUMARK GP User manual

WALL MOUNT
577
COOPER LIGHTING
• Die-cast aluminum
housing finished in
architectural dark bronze
polyester powder coat
• Precision aluminum
reflector/ visor system
directs light down and
out, eliminating glare
and wasted light
• Optical system is sealed
with foam-in-place
silicone gasketing
• Can be mounted to any
vertical surface. 1/2"
knockouts on side of
housing accommodate
surface-mounted conduit,
or back plate can be
mounted to 4" octagonal
J-box
• Prismatic borosilicate
glass refractor provides
excellent beam
distribution without
lens yellowing
• U.L. listed for wet
locations. CSA certified
• Approximate net weight:
18 lbs. (8 kgs.)
COOPER LIGHTING - LUMARK®
GP
GLASS-PAK
35-175W
High Pressure Sodium
Metal Halide
WALL MOUNT
LUMINAIRE
DIMENSIONS DESCRIPTION
The Lumark Glass-Pak is
constructed of premium
die-cast aluminum and
features a borosilicate glass
lens. U.L. listed for wet
locations. CSA certified.
NOTES: 1 All lamps are medium-base. 235W is HPS only, 120V only. 3Products also available in non-US voltages and 50Hz for international markets. Consult factory
for availability and ordering. 4480V not available in 35 or 50W. 5Dual-Tap ballasts are 120/277V wired 277V. 6Multi-Tap ballasts are 120/208/240/277V wired
277V. 7Triple-Tap ballasts are 120/277/347V wired 347V. 8Add as suffix in the order shown. 9Lamp is shipped separate from luminaire. Lamp is Cooper
designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 10 Order separately. 11 Consult your Cooper
Lighting Representative for availability and ordering information. 12 Specifications and dimensions subject to change without notice.
MOUNTING DETAIL
Options 8
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
PE=Internal Photocontrol
TR=Tamper Resistant Screws
LL=Lamp Included 9
WHT=White Finish
Accessories 10
PE/MT=Field Installed Photocontrol (Specify voltage)
TRSD-8/32=Tamper-Resistant Screwdriver
PE-480V=480V Photoelectric Control
PE-347=Field Installed Photocontrol, 347V
UB-U Universal BKT=Universal Mounting Bracket
WG/GP-GS=Wire Guard
ORDERING INFORMATION
SAMPLE NUMBER: MHGP-175H-MT-LL
Lamp Type
HP=High Pressure
Sodium
MH=Metal Halide
Series
GP=Glass-Pak
Lamp Wattage 1
35=35W 2
50=50W
70=70W
100=100W
150=150W
175=175W
Power Factor
__ =NPF
H=HPF
Voltage 3
120V
208V
240V
277V
347V
480V 4
DT=Dual-Tap 5
MT=Multi-Tap 6
TT=Triple-Tap 7
Options &
Accessories
(See Below)
6 3/4"
[171mm]
10"
[254mm]
7"
[178mm]
2 1/2"
square
[64mm]
6 1/4"
[159mm]
7/8" diameter
[22mm]
9 3/16"
[233mm]
LAMP TYPE WATTAGE
Metal Halide 50, 70, 100, 150W
High Pressure Sodium 35, 50, 70, 100, 150, 175W