Cooper Lighting P1R User manual

#10-32 x5/8"
(by others)
(by others)
Set screw(2x)
Wiring holes
Exploded view and part call-out
J-box
nd screw
#10-32 x3/8"
(2x)
1/4" fasteners
Canopy
Fixture
head
mount fixtures vertically.
Roundel
3
Installation Instructions
These installation instructions are valid with the above Ametrix styles.
Vault
1
C-Scroll
2
Sheet 1 of 2
Visor and Non-Visor
Warning
that all sources of power are turned off. All
performed by a certified electrician.
: Before starting any work ensure
work must meet local/national codes and be
Do not
Small, IND R
P1R
(Pendant, 1-way, Remote ballast)
ADY071464 REV B (ECN80481)
#10-32 x3/8"
Set screw
(2x)
1/4" fasteners
additional bracing around J-box to support fixture.
(by others)
1. After securing fixture to ceiling, attach appropriate wires and
Yoke
2. Push wire connections into j-box and cover mounting plate
(4x)
Using appropriate fasteners, secure fixture to ceiling.
Set screw(2x)
ensure all connections are properly matched.
with canopy.
Wiring the fixture
3. Secure canopy using both #10-32x 3/8" set screws.
Aiming the fixture
#10-32 x3/8"
Canopy
fixture.
around J-box to support
Run wires from pendant and j-box through wiring holes in
mounting plate.
Mounting the fixture
4. Use
1. Using both #10-32 x5/8" end screws, secure fixture head to
yoke on pendant and run fixture wire through pendant.
2. Remove both #10-32 x3/8" set screws and allow canopy to
slide down pendant.
3.
Use additional bracing
#10-32 x5/8"
nd screw
(x2)
(2x)
screws to secure the position.
Fixture head
degrees. ach subsequent notch is an additional +/- 10-
nd screw
#10-32 x5/8"
2. When fixture head is rotated to desired angle, retighten end
degrees
indicator
1. To aim fixture, loosen both #10-32 x5/8" end screws. When
both indicators are lined up, the slope of the lens face is 40-
Yoke arm
indicator

Side View Top View
Use only GE or Sylvania
CFL lamps
Sheet 2 of 2
Installation Instructions
Vault w/ visor C-Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Mounting Plate Dimensions In [mm]
Visor and Non-Visor
Warning
Lamping Size Chart
Do not
that all sources of power are turned off. All
: Before starting any work ensure
performed by a certified electrician.
work must meet local/national codes and be
mount fixtures vertically.
(lamps provided by others)
Small, IND R
P1R
(Pendant, 1-way, Remote ballast)
ADY071464 REV B (ECN80481)
"
25.40
"
1
1"
2
(4x)
6.35
1
12.70
5"
127
5"
127
1"
4
4"
101.60
4"
101.60
25.40
1
2"
12.70
7
16 "
11.42
on order
Length dependant
FIXTURE SIZE
(inches/ mm) WATTAGE # OF LAMPS LAMP TYPE LAMP DESCRIPTION
10
3/4
/ 273.05 39 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 70 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 150 W 1 T6 Ceramic Metal Halide
12
3/4
/ 323.85 26 W 1 4-Pin Triple
Tube Compact Fluorescent
12
3/4
/ 323.85 32 W 1 4-Pin Triple
Tube Compact Fluorescent
12
3/4
/ 323.85 42 W 1 4-Pin Triple
Tube Compact Fluorescent
10
3/4
/ 273.05 100 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 150 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 250 W 1 T4 Halogen (Single Ended)
LAMP
(not to scale)