SPECIFICATION
Voltage: 240Va.c.
50Hz
Power: 600W
SAFEGUARDS
DO NOT LEAVE APPLIANCE PLUGGED IN WHEN NOT IN USE.
NOT FOR OUTDOOR USE, ONLY USE ON DRY INDOOR SURFACES.
DO NOT USE ON WET SURFACES OR TO VACUUM LIQUIDS.
DO NOT HANDLE THE APPLIANCE WITH WET HANDS.
THIS IS NOT A TOY, KEEP WAY FROM CHILDREN.
USE ONLY AS DESCRIBED IN THIS MANUAL.
USE ONLY MANUFACTURERS APPROVED ATTACHMENTS.
DO NOT USE IF ANY PART OF THE ITEM OR CABLE ARE DAMAGED. IF ANY DAMAGE IS
APPARENT, RETURN THE
ITEM TO AN APPROVED SERVICE CENTRE FOR REPAIR/REPLACEMENT.
DO NOT USE IF THE ITEM HAD BEEN ALLOWED TO GET WET.
DO NOT PULL OR CARRY BY THE POWER CORD, ONLY USE THE HANDLE.
KEEP APPLIANCE AND CORD AWAY FROM ANY HEAT SOURCE.
TO UNPLUG, GRASP THE PLUG, DO NOT PULL ON THE CORD.
DO NOT PUSH AND OBJECTS INTO ANY OPENING ON THE VACUUM, KEEP OPENINGS CLEAR
OF LINT, DUST ETC.
KEEP HAIR AND LOOSE CLOTHING AWAY FROM OPENINGS AND ANY MOVING PARTS.
DO NOT USE TO VACUUM ANY HOT MATERIAL, CIGARETTES, ASH, ETC.
TURN OFF BEFORE UNPLUGGING.
DO NOT USE ON COMBUSTIBLE LIQUIDS, RISK OF EXPLOSION MAY RESULT.
UNPLUG THE APPLIANCE BEFORE CLEANING.
ALWAYS ENSURE THE SUCTION HOLE IS FREE OF ANY OBSTRUCTION,
FAILURE TO DO SO MAY RESULT IN THE VACUUM OVERHEATING.
ASSEMBLY
With the appliance unplugged open the front cover and ensure the dust cup filter is fitted.
Attach shoulder strap to two fixing points, adjust as necessary.
Attach crevice brush or cleaning brush to the front suction hole, or attach the brush
accessories to the extension hose and fit the extension hose to the suction hole.
USE
Assemble required attachment.
Use shoulder strap if desired.
Hold appliance by handle.
With thumb turn on appliance.
Start vacuuming.
Note: For your safety after prolonged use the Vacuum Cleaner has a thermal protector which will
cut-out power if the temperature exceeds 105 °C. This can also happen if the dust cup filter is full.
See Troubleshooting.