Coopers HT/148D User manual

Read carefully before use and retain for future reference.
PARTS
MAIN FRAME
1. Trolley Base 1
2. Side Panel 2
3. Front anel 1
4. Back anel 1
5. Wheels 4
REAR AXLE
6. Rear axle su ort 1
7. Left rear axle brace 1
8. Right rear axle brace 1
FRONT AXLE ( re-assembled)
9. Front axle su ort 1
10. Centre front axle su ort 1
11. Yoke 1
12. Steering link connector 1
HANDLE ( re-assembled)
13. Plastic cou ling 1
14. Handle 1
15. Trailer hitch 1
16. Tar aulin 1
FIXINGS
17. Fence ins 8
18. Handle in 1
19. Clevis in 1
20. Lock handles 8mm 4
21. Washers 8mm 11
22. Locking nuts 8mm 11
23. Wheel s acers 4
24. Wheel locking nuts 12mm 4
25. Wheel washers 12mm 4
26. Carriage bolts 8x20mm 10
27. Handle bolt 8x60mm 1
28. Shoulder bolt 8x15mm 3
29. Washers 6mm 4
30. Locking nuts 6mm 4
31. Shoulder bolt 8x20mm 1
TOOLS REQUIRED (not supplied)
Medium flathead screwdriver and 10mm,
13mm & 19mm o en end wrenches or 2x
medium adjustable wrenches.
Garden Cart
HT/148D

ASSEMBLY
1. Fix the left and right rear axle braces (7 & 8)
to the rear axle su ort (6) using bolts (26),
washers (21) and locking nuts (22) to form
the rear axle. Attach the assembled rear axle
to the trolley base (1) using bolts (26),
washers (21) and locking nuts (22) – see left.
2. Attach the yoke (11) to the front axle su ort
(9) using the re-attached 10mm washer
(and cotter in. Attach the centre front axle brace (10) to the yoke (11) using 8x20mm
shoulder bolt (31), 6mm washer (29) and 6mm locking nut (30). Attach the yoke (11) to
the steering link connector (12) using 1x 8x15mm shoulder bolt (28), 6mm washer (29)
and 6mm locking nut (30).
Insert the remaining 2x
8x15mm shoulder bolts (28)
into the ends of the steering
link connector (12) and
secure using 6mm washer
(29) and 6mm locking nut
(30) – see right.

3. Attach the front axle su ort (9) to
the trolley base (10) using 8x20mm
carriage su ort bolts (260,
washers (21) and locking nuts (22) –
see left.
4. Attach the wheels by fitting the wheel
s acers (23) onto the axles before
attaching the wheels (5) ensuring the
valve stems are facing outwards.
Secure using 12mm wheel washers (25)
and 12mm wheel locking nuts (24) –
see right.
5. Attach the handle to the yoke (11) and
the lastic cou ling (13) using 8X60mm
handle bolt (27), washer (21) and
locking nut (22). Attach the handle (14
or trailer hitch (15)using the handle in
(18) and clevis in (19) – see right.
6. Attach the front anel (3) back anel
(4) and side anels (2) to the trolley
base (1) using the fence ins (8). Use
the locking handles (20) to attach the front and back anels to the side anels. Secure
using locking nuts (22).
7. Fit the tar aulin and secure
using the ress studs.

WARNING
•Maximum weight load limit 227kg.
•The garden Cart is not a toy. Do NOT allow children to lay in, on, or with this item.
•Always distribute weight load evenly.
•Do not load any items on to of the front, back or side anels. Lower the anels if necessary
to load oversized items.
•Before use, check all fixings are secure and tighten if necessary.
•Before use, check all arts for damage, including tyres.
•Do NOT use if damaged.
•Do not inflate the tyres to more than 30 PSI.
•Do NOT use on surfaces that may cause damage to the tyres or inner tubes. Always check
the trans ort route for shar objects before trans orting items in the Garden Cart.
PA KAGING
•Dis ose of ackaging at your local recycling centre.
•Dis ose of a er and carton se arately from lastic bags at your local recycling centre.
•Dis ose of item at the end of its lifes an at your local authorised household waste recycling
centre.