Coppernic C-five User manual

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
Head Office
185 avenue Archimède
13857 Aix-en-Provence Cedex 3 • France • Tel. [phone] • Fax [phone]
SAS au Capital de 100 000 Euros • RCS AIX 509 059 572 • SIRET: 509 059 572 00016 • APE 6201Z • TVA: FR 58 509 059 572

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Product Overview:
Scanner
Power Key
Function Key
(KEY_LEFT UP)
Menu Keys
(Return/Home/Data)
Volume Keys
Function Key
(Scan/KEY_RIGHT)
Function Key
(Scan/KEY_LEFT DOWN)
Touch Screen
LED Indicators
Micro USB
Pogo Connectors
for charging
Battery Door
Battery Latch
Camera
LED Flash

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Setting up your phone
Installing MicroSD / MicroSIM cards
1. Open the battery door: Slide the battery latch to the right
2. Insert the MicroSD into slot
3. Insert MicroSIM into SIM slot
Battery Installation
1. Insert the battery, top side first.
2. Rotate the bottom side of the battery in the compartment.
3. Press down the battery cover until you hear a “click” sound.
The MicroSIM must be inserted parallel
to the battery compartment. If not,
there is a risk to damage the SIM
connector.
MicroSD card
MicroSIM card

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Note: Please make sure the battery latch is on the left hand side for the
battery door to close properly.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Charging the Battery
Charge the battery via one of the following accessories certified with C-five:
1. Use a MicroUSB cable connected together with a Power Adaptor Jack.
-- Keep microUSB clean and dry before charging --
2. Use Single Cradle connected with DC Power adaptor and Plug (COPPERNIC Model
Name: DS-FIVE).

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Charging indicators
1. Main Device: C-five.
2. Cradle: DS-FIVE.
LED indicates the status of cradle power connection and battery power.
CAUTION: Please make sure the device is fully charged before using C-five for the first time.
Solid Red: Power connected and low battery power
Solid Green: Power connected and a battery is fully
charged.
Blinking Red: Low Power
Solid Red: Battery is charging
Solid Green: Battery is fully charged

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Using Your Phone
Turning ON/OFF Your Phone
1. To turn on the phone, press and hold the power button.
2. To turn off the phone, press the power button and select
“Power off” in the dialog box.
Note: Device turns to the other modes as below by holding power button key.
Suspend Mode
Press and release the power button to place the device in suspend mode. The display will be off and go
into a low power state to save battery power.
Reboot
Press and hold the power button and select “Reboot” in the dialog box to restart the device.
Data Capture
Scan a Bar Code with Imager:
1. Go to “Setting” “Functional Keys” Select "SCAN" for function
keys used for scanning.
2. Go to “BarCodeScanDemo” apk  Select “ ” for scanner settingPress
function keys to scan barcodes.
CAUTION: CLASS 2 LASER WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW WITH OPTICAL
INSTRUMENTS. COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC/EN 60825-1:2014.
Photo & Videos
1. Go to Home Screen select “Camera” Tap camera icon or screen to take a
picture/switch to video icon and tap for video recording.
2. Use the rear camera to take photos and capture videos.
Note: Ensure device memory or extend MicroSD card is space is available.
Installing Apps
Download applications from Google Play Store.
1. Go to Home Screen select “Google Play” icon.
GPS Information
1. Acquiring satellite signals may take a few minutes.
2. Without a clear view, acquisition takes longer.
3. Turn off GPS when not in use to save battery.

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Regulatory Information
Caution: Only use COPPERNIC approved accessories.
C-five Band Frequency power:
1. Wireless Device Country Approval
Regulatory markings, subject to certification, are applied to the device signifying the
radio(s) are approved for use in the European countries under CE coverage.
For 2.4GHz or 5GHz products: Europe includes Austria, Belgium, Bulgaria, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherland,
Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
EUT Type Handheld Device
Brand Name TURBONET / COPPERNIC
Model Name TN500A1, TN500A1(WOS), C-five, C-five(WOS)
Tx Frequency Bands
(Unit: MHz
GSM900 : 880 ~ 915
GSM1800 : 1710 ~ 1785
WCDMA Band I : 1920 ~ 1980
WCDMA Band VIII : 880 ~ 915
LTE Band 1 : 1920 ~ 1980
LTE Band 3 : 1710 ~ 1785
LTE Band 7 : 2500 ~ 2570
LTE Band 8 : 880 ~ 915
LTE Band 20 : 832 ~ 862
LTE Band 28 : 703 ~ 748
LTE Band 38 : 2570 ~ 2620
LTE Band 40 : 2300 ~ 2400
WLAN: 2412 ~ 2472, 5180 ~ 5320, 5500 ~ 5700, 5745 ~ 5825
Bluetooth : 2402 ~ 2480
NFC : 13.56
GPS : 1575.42
Maximum AVG Conducted Power
(Unit: dBm)
GSM900 : 32.55
GSM1800 : 29.82
WCDMA Band I : 23.66
WCDMA Band VIII : 23.58
LTE Band 1 : 22.89
LTE Band 3 : 22.54
LTE Band 7 : 23.35
LTE Band 8 : 23.15
LTE Band 20 : 22.20
LTE Band 28 : 23.29
LTE Band 38 : 22.57
LTE Band 40 : 23.33
802.11b : 14.71
802.11g : 15.22
802.11n HT20 (2.4GHz) : 15.28
802.11n HT40 (2.4GHz) : 15.26
802.11a : 14.87
802.11n HT20 (5GHz) : 14.82
802.11n HT40 (5GHz) : 14.75
Bluetooth : 1.86

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Caution: Operation of the device without regulatory approval is illegal.
2. Country Roaming
This device incorporates the international roaming feature which will ensure the
product operates on the correct channels for the particular country of use.
3. Ad-Hoc Operation (5GHz Band)
Ad-Hoc operation is limited to Channels 36- 64 (5150 – 5350 MHz). Use of this band
is restricted to indoor use only, any other use will make the operation of this device
illegal.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Please delete this sentence after 6/2, 2014, if EUT follow NEW U-NII rule.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed)
Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this
manual. The further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user body or set the device to lower output power if such
function is available.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)
Note: The country code selection is for non-US model only and is not available to all
US model. Per FCC regulation, all WiFi product marketed in US must fixed to US
operation channels only.

C-five
QUICK START GUIDE & REGULATORY
QSG 180091 – A00
www.coppernic.fr
Warnings of Use Wireless Devices
Please observe warning notices with regard to the usage of wireless devices.
1. Potentially Hazardous Atmospheres – Vehicles Use
You are reminded of the need to observe restrictions on the use of radio devices in
fuel depots, chemical plants etc. and areas where the air contains chemicals or
particles (such as grain, dust, or metal powders) and any other area where you would
normally be advised to turn off your vehicle engine.
2. Safety in Aircraft
Turn off your wireless device whenever you are instructed to do so by airport or airline staff.
3. Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical
equipment. Wireless devices should be switched off whenever you are requested to
do so in hospitals, clinics or healthcare facilities. These requests are designed to
prevent possible interference with sensitive medical equipment.
Safety Information – Europe
This device was tested for typical body-worn operation. Use only COPPERNIC tested
and approved accessories to ensure EU compliance.
Laser Devices
Class 2 laser scanners use a lower power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a class 2 laser is not known to be harmful.
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Power Adaptor
1. Use only a C-five approved Power Adaptor with electrical ratings: Output5VDC,
min 2A, with a maximum ambient temperature of at least 45°C.
2. Use of alternative power adaptor will invalidate any approvals given to this device
and maybe dangerous.