CORBERO CCV3IN60 User manual

Model/Modelo:CCV3IN60
Instruction Manual
Manual de Instrucciones

Please use adedicated power protection
air switch;
•
•
Indoor use only.
•
Never
directly
wash the induction hotplate
with water so as to avoid dangers.
•
Never have the induction
food inside, otherwise its
may be affected and
•
For sealed food such as
do not heat them before
as to avoid any dangers
heating expansion.
•
•
After being used for a long time, the
corresponding heating zone of the induction
hotplate is till hot. Never touch the ceramic
surface to avoid burning.
We suggest that you
that there are no object
could obstruct the inlet
hotplate.
2
Safety Reminding and Maintenance

•
Metallic objects such as knives, forks,spoons
and lids should n
o
tbe
placed
on
the hotplate
since they
can get hot.
• Never
use the ceramic cooker hob in high
temperature environments such as near a
gas stove or kerosene stove.
•
Do not put any detergents or flammable
materials in
the equipment
installed under
the ceramic cooker hob.
•
If the surface is cracked, swith off the
appliance to avoid the possibility of electric
shock.
•
Do not place rough or uneven appliances,
which may damage the ceramic surface.
•
Clean the induction hotplate on a regular
basis to prevent foreign
fan thus influencing the normal operation.
•
Keep electrical appliance out of reach
person. Do not let them
use the appliances without supervision.
•
If the supply cord is damaged , it must be
replaced by the manufacturer, its
similarly qualified
avoid a hazard.
3

•
DISPOSAL: Do not dispose this product
as unsorted municipal waste. Collection of
such waste separately
necessary.
•
•
•
•
•
Children should be supervised to ensure that
they do not play with the appliance.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge,
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
A steam cleaner is not to be used.
The appliance is not intended to be operated
by means of an external timer or
After use, switch off the hob element by its
control and do not rely on the pan detector.
4

•
•
play with the appliance.not
The adult should supervise children to make
sure children can
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
they have been given
unlesslack of experience and knowledge,
•
•
This appliance is designed
ues.
Some examples of
WARNING: The appliance and its accessible
parts become hot during use.
Care should be taken to avoid touching
heating elements.
Children less than 8 years of age shall be
kept away unless continuously supervised.
5

•
This appliance can be used by children aged
from 8 years and above and persons with
reduced physical,sensory or mental
capabilities or lack of experience and
knowledge if
•
•
•
•
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision
.
WARNING: Unattended cooking on a hob
with fat or oil can be dangerous and may
result
and then cover flame e.g. with a lid or a fire
blanket.
WARNING: Danger of fire: do not store items
on the cooking surfaces.
WARNING: If the surface is cracked, switch
off the appliance to avoid the possibility of
electric shock.
6

Cooking Hob
Cooking Zones  INDUCTION
Supply Voltage 220-240V 50/60Hz
400 V 50/60Hz
Installed Electric Power
(W)
Product Size
D×W×H(mm) 590×520×60
560×490
Building-in Dimensions
A×B (mm)
Induction Hotplate
Appearance
Thank you for purchasing the induction hotplate, please read this instructions
manual carefully before using, and keep it cautiously for your future reference.
7100
CCV3IN60
7

8
Dear customer:
Thank you for purchasing the induction hotplate.
Please read this instructions manual carefully before installation and using,
keep it cautiously after reading for future reference.
Thank you for your purchase of the induction hotplate again, and wish you to
enjoy the pleasure by it.
Product Introduction
The induction hotplate can meet various demands of cuisine by
electromagnetic heating, with micro-computerized control and multifunction,
really the optimal choice for modern families.
The induction hotplate centers on customers and adopts personalized design,
and which will make your life comfortable and enabling to fully enjoy the
pleasure of life.
We have designed this hob for private use in home.
Working Principle
The induction hotplate is mainly composed of an induced heating coil, hotplate
made of ferromagnetic materials and control system.
In principle, current generates a powerful magnetic field via the coil. Large
numbers of vortexes are produced in the way that the magnetic lines in the
field contact the bottom containing iron or stainless steel substances. The
tremendous energy generated by the vortexes can heat the food directly by
converting efficiency heat energy penetrating through the bottom.
Figure (1)

9
Over- Temperature Protection
A temperature sensor equipped can monitor the temperature inside the
hotplate. When an excessive temperature is monitored, the induction hotplate
will stop operation automatically.
Pot Detection
When an unsuitable size or non-magnetic pot (e.g. Aluminum), or some other
small item (e.g. knife, fork, key) has been left on the hob, or the pot has been
removed, the hob can stop heating immediately. If there is no suitable pan put
on the right hob in one minute, the hob will go automatically into the standby
state, and the buzzer will sound for warning at one time.
Heat Indication
When the hotplate is used for a long time, waste heat remains in the heating
zone in a few minutes. The code “H” appears, warning to be away from the
heating zone.
Protection of Shutting Down Automatic
Shutting down Automatic is a safety protection function for your induction
hotplate. It will shut down automatically if you forget to turn off your cooker.
The default working times for various power levels are shown in the
following table:
Power level The heating zone shut down automatically
after
1~3 8 hours
4~6 4 hours
7~9 2 hours
*Remind:
The patient with a heart pacemaker shall use this product under the guidance
of the doctor.

10
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50 mm space shall be
preserved around the hole.
Be sure the thickness of the table surface is at least 30mm. Please select
heat-resistant table material to avoid larger deformation caused by the heat
radiation from the hotplate.
As shown in Figure (2)
Figure (2)
Under any circumstances, make sure the induction hotplate is well ventilated
and the air inlet and outlet are not blocked.
Ensure the induction hotplate is in good work state.
As shown in Figure (3)
SEAL
Figure (3)
mini 5 cm mini 5 mm
mini 2 cm
Air exit
Air intak e
560 mm
+4
+1 490 mm
+4
+1

11
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 760mm.
shown in figure (4)) after installation. Adjust the bracket position to suit for
different table top thickness.
Figure (4)
Cautions:
1. The induction hotplate must be installed by qualified personnel or
technicians. We have professionals at your service. Please never conduct
the operation by yourself.
2. The induction hotplate shall be installed such that better heat radiation can
be ensured to enhance its reliability.
3. The wall and induced heating zone above the table surface shall withstand
heat.
4. To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.
ELECTRICAL CONNECTION
"The installation must conform to the standard directives."
The manufacturer declines all responsibility for any damage that may be
caused by unsuitable or unreasonable use.
Fix the hob on the table by screw two brackets on the bottom of hob (as

12
Warning
• Always check before any electrical operation, the supply tension shown on
the electricity meter, the adjustment of the circuit breaker, the continuity of the
connection to earth to the installation and that the fuse is suitable.
• The electrical connection to the installation should be made via a socket with
a plug with earth, or via an Omni-pole cut-out switch with an opening gap of at
least 3 mm.
If the appliance has a socket outlet, it must be installed so that the socket
outlet is accessible.
• The yellow/green wire of the power supply cable must be connected to the
earth of both power supply and appliance terminals.
• The manufacturer cannot be held responsible for any accidents resulting
from the use of an appliance which is not connected to earth, or with faulty
earth connection continuity.
• Any queries regarding the power supply cord should be referred to After
Sales Service or a qualified technician.
• I f the cable is damaged or to be replaced, the operation must be carried out
the by sale agent with dedicated tools to avoid any accident.
Power line connection
The socket shall be connected according to the relevant standard or
connected to a single-pole breaker.
The method of connection is shown in Figure (5):
Figure (5)
blue
green-yellow
N2 N1 L2 L1
grey
brown
black
220-240V
220-240V
blue
green-yellow
N L2 L1
grey
brown
black
400V
220-240V
220-240V
PE
blue
green-yellow
N L
grey
brown
black
220-240V
PE
PE
connet to the main power supply connet to the main power supply connet to the main power supply
220-240V 2+2N~ 220-240V~
400V~ 2-N

If the cable is damaged or needed to be replaced, the operation must be
carried out by the after-sale agent with dedicated tools to avoid any accidents.
If the appliance is being connected directly to the mains an Omni-polar
circuit-breaker must be installed with a minimum opening of 3mm between
contacts.
The installer must ensure that the correct electrical connection has been made
and that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorized technicians
only.
Induction Hotplate Appearance
Figure (6)
Air entry
Air vent
Control panel
Ceramic plate 3
2
1
13

Schematic Diagram of The Control Panel
Figure (7)
Instructions For Use
OR
OR
Timer Regulating key
Preparation Before Using:
After power on, the buzzer beep once, all the indicators light up for 1 second and
then go out, which indicates the induction hotplate enters the state of standby.
Put the pot in the center of the heating zone.
Operation Instructions:
When the “ON / OFF” button is pressed, all the indicators show "-" .
According to the heating zone where the pot is placed, press the "+" or "-"
button, select a relevant zone ,the indicator displays 5, then adjust the power
levels using the "+" or "-" button.
AND
Or press the "+" and "-" buttons simultaneously, the power setting immediately
chang to 0, and all the cooking zone switch off.
Boost
On/OFF
Power Regulating key
Lock
14

OR
See the attached table “the max. power of each heating zone” for the power
specific to each heating zone.
Note: 1. After the “ON/OFF” button is pressed, the induction hotplate will
restore to its standby state if no any operation is carried out within one minute.
Boost function
To get a quicker heating speed, there is a function named “Boost” will satisfy
your requirement.
Directly press the “ Boost” button after selecting the heating zone, with the
power level indicator showing “P. ” , and the heating power can reach up to the
max. .
OR OR
AND
Note:
1. The boost function only operates for 5 minutes, after which the cooking zone
returns to its orginal setting.
2. The boost function only works on the third cooking zone.
Cancellation of “Boost” function
When in the "Boost" function, select the relevant heating zone with the “Boost”
function, and press the "Boost" button or the "-" button to cancel the Boost
function, then the cooking zone will revert to its original setting.
Or press the "+" and "-" buttons simultaneously when the relevant heating zone
has been selected, the “Boost” function will be cancelled automatically. The
power setting immediately chang to 0, and this heating zone switch off at the
same time.
15

Timing function
Select the relevant cooking zone, and set the power level with the “+” or “-”
button. (e.g. the cooking zone 3 with power level 6)
Press the "+"or"-""of timing button, the timing indicator flashes, and you can
set the timer at this point.
Using the “+” or “-“of timing buttons, you can realize the setting of timing from
1 to 99 minutes.
When the “+”of timing button is pressed, the time setting will increase by 1 minute;
And it will increase by 10 minutes when the “+”of timing button is long pressed.
When the “-”of timing button is pressed, the time setting will decrease by 1 minute;
And it will decrease by 10 minutes when the “-”of timing button is long pressed.
Timing confirmation:
After selecting a set time, once the timing indicator flashes for 5 seconds, the set
time will be confirmed to be valid automatically.
Timing cancellation:
If press the "+" and "-" simultaneously, the timing can be cancelled automatically,
with the timing indicator showing “00”.
OR
OR AND
OR
AND
16

Note:
1. In the timing state, the power level of the relevant cooking zone can be changed,
and the time set is still valid.
2. Press the “+” or “-“of timing button without select one cooking zone when the
induction hotplate is working, the time-warning function will operate. And the
warning time can be set just like the timing function. The buzzer will be beeping
for 30 seconds when the time is reached. The function will be cancelled when
the time is set to 0.
3. the time-warning function will be cancelled when the induction hotplate is
switched off.
Interlock Function:
To ensure the safety of children, the induction hotplate is provided with the function
of interlock.
Interlock:
Press the “Interlock” button, then the induction hotplate enters the locking state,
with the timing indicator showing “Lo”.
Unlock:
Holding the “Interlock” button for about 3 seconds, the locking state will be removed.
Note:
1. The rest buttons disabled except the “ON/OFF” and “Interlock” button when the
induction hotplate is in the locking state. Only unlocking the buttons or else the
induction hotplate won’t be operated.
2. If the induction hotplate enters the locking state in the off mode, the timing
indicator showing “Lo” for one minute. And it will be shown for one minute again
when the “ON/OFF” or “Interlock” button is pressed.
The max. power of each heating zone are as follows
Max. Power(W)
Heating Zone Normal Boost Dia. Of the Heating Zone
1 1500 -- 160mm
2 20
3000
00 -- 180mm
3 3600 180/20mm
The above power may vary if the material or the size of pot is differet.
17

Selection of heating appliances
Iron oil frying pan Stainless steel pot Iron pan Iron kettle
Enamel stainless
steel kettle
Enamel cooking
utensil Iron plate
You may have multiple appliances suitable for heating.
This induction hotplate is able to identify multiple heating appliances, and you
can test them according to one of the following methods:
1. Place the appliance in the heating zone. If the corresponding heating zone
displays a power level, it shows the suitability of the appliance; if “ ” flashes, it
shows the appliance does not fit in the induction cooking.
2. Have a magnet to contact the appliance. If there is attraction between them,
it shows the appliance also fits in the induction cooking.
● Requirement for pot material: the bottom contains materials of magnetic
conductivity.
● Requirement for shape: flat bottom.
18

Cleanness and Maintenance
You can easily clean the surface of the induction hotplate if following
the methods given in the table.
Type of
contamination Method of cleaning Articles used
forcleaning
Light Immerse in hot water then wipe it
dry Cleaning sponge
Accumulation of
dirt
Immerse in hot water then wipe it
dry with abrasive sponge
Special cleaning
sponge for ceramic
glass
Rings and lime
crumbles
Apply white vinegar to the
polluted zone, then wipe it dry
with soft cloth or a special article
available in local markets
Special adhesive for
ceramic glass
19
Sweetmeat, melt
aluminum or
plastics
Use a scraper suitable for
ceramic glass (to protect glass, a
silicon product is preferred) to
remove residuals
Special adhesive for
ceramic glass
Hint: please disconnect power before the cleaning.

Failure Display and Inspection
If an abnormality comes up, the induction hotplate will enter the protective
state automatically and display corresponding protective codes:
Troubles Possible reasons Solutions
F0-F2 Fan failure. Please contact the supplier
Power on, and then restart after the
temperature around returns to be
normal.
F3-F8 Thermistor component
failure.
Please contact the supplier.
Power on, and then restart after the
temperature around returns to be
normal.
F9-FE Temperature sensor of
the IGBT failure.
Please contact the supplier.
Please inspect whether power
supply is normal.E1-E2 Abnormal supply voltage.
Please contact the supplier.
Please inspect the pot.
Please restart after the hotplate
cools down.
E3-E4 Abnormal temperature.
Please contact the supplier.
Please restart after the hotplate
cools down.E5-E6 Bad hotplate heat
radiation. Please contact the supplier.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hotplate.
20