Core Products Augusta AG510 User manual

Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish. For the models with drawers, we also recommend
you use household spray polish occasionally on drawer grooves and runners as this will aid use. Please do not use detergents or chemicals
on your furniture.
50min P3
AG510
PARTS LIST
NOVEMBER, 18, 2019 (1)
28mm
25mm
Ø4,5
Ø4,5
B
F
H
x20
x06
x02
P3
P3
P3
Ø8
25mm
Ax28
30mm
Ø3,5
Cx08
GOLD
GOLD
GOLD
P3
Dx06
40mm
Ø4,0
GOLD
Jx20
GOLD
Ø4,5
16mm
P3
P3
Ex06
Ø3,0
14mm
Gx04
BLACK
BLACK P3
Zx22
8 x 8
Yx01
2x
01
02
03
04
04
04
04 05
06
06
06
06
07
07
13
08
12
09
10
11
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings
as detailed on the assembly instructions.
FOR DAMAGED/REPLACEMENT PARTS
Please visit
www.coreproducts.co.uk/parts
Batch
Number
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE/RECEIPT FOR FUTURE REFERENCE
2019-0386

01
02
03
2x
2x
4x
11
10
04
02
03
05
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
E
E
E
E
D
D
D
D
D
E
E
A
A
Ø8
25mm
Ax28
Ex06
E
25mm
Ø4,5
Fx06
P3 GOLD
Dx06
40mm
Ø4,0
GOLD
P3
F
F
F
01
03
02
D
F
Build your furniture on a soft clean
cover to stop the components
getting marked during assembly.

04
05
06
07
07
Z
Z
Z
Z
Z
Z
Z
Z
Z
ZZ
Z
ZZZ
Z
Z
Z
Z
Z
Z
x22
1
2
Zx22
8 x 8
3
Jx20
GOLD
Ø4,5
16mm
P3
28mm
Ø4,5
Bx12
P3 GOLD
90º
90º
JJ
JJ
J
B
B
BB
B
B
BB
B
B
BB
J
J
J
J
J
JJ
J
J
J
J
J
J
J
J
06
06
04
04 04
04
06
06
90º
13
07
07
13
J
J
J
J
J
06

07
08
09
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top using the 14mm screw + washer and securely tighten.
Yx01
Y
Y
14mm14mm
25mm
IMPORTANT NOTICE
Please avoid opening all drawers simultaneously
as this could cause your furniture to fall forwards.
Where there is a risk of this occurring, especially in
environments with children or uneven floors we
recommend that this item of furniture is attached to
your wall using appropriate fixings (supplied).
09
09
2x
11
10
09
08
12
B
B
B
B
B
C
G
H
G
C
C
C
28mm
Ø4,5
Bx08
P3 P3
30mm
Ø3,5
Cx08
GOLD GOLD
P3
Hx02
Ø3,0
14mm
Gx04
BLACK
BLACK P3
GG
G
GG
HH