Core Products NEVADA HIGH SIDEBOARD NE916 Manual

105 min
Height: 1103 mm
Width: 1058 mm
Depth: 340 mm
PLEASE RETAIN THIS INSTRUCTION LEAFLET FOR FUTURE REFERENCE.
BATCH NUMBER
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton for 48 hours or more so the contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture range has been carefully crafted from melamine faced manufactured board.
Each piece is manufactured to the highest standards using specialised computer controlled machinery to ensure accuracy.
Caring for your furniture.
Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to radiators or other direct sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Always use place mats, coasters or tablecloths to help protect against scratches and accidentally dropped items. Always use heat resistant mats when placing hot or
cold items on to surfaces.
Do not sit or stand on your furniture.
After care.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish and a household glass cleaner on glass surfaces.
Please do not use detergents or chemicals on your furniture.
After assembly remove all visible component identification stickers, these should remove easily however any remaining adhesive residue can be easily removed with
a label adhesive removal liquid available from most DIY or hardware stores.
Specialist glass care.
Glass can be marked with continual use by contact with rough surfaced objects or strong coloured fluids. In the unlikely event that the glass is damaged it must be
replaced without delay with toughened glass made to specification BS EN12150. Please consult a specialist glass retailer for this.
NEVADA HIGH SIDEBOARD
REF. NE916
BEFORE YOU START ASSEMBLY
Please check that you have all the correct
parts and fittings as detailed.
In the unlikely event that you require to
order spare parts or fittings please refer to
your delivery note for details of how to order
using our Parts website.
www.coreproducts.co.uk/parts
Customer help line 01738 630555
We recommend that you build your
furniture on top of a soft clean cover to
ensure the unit does not get marked or
damaged during assembly.
2/10/2020

Page 2
ASSEMBLY PARTS
ASSEMBLY HARDWARE
Flat Head
Screw (14mm)
x22
x46
Dowel Minifix Bolt
x34
Cover Caps
x32
x34
Minifix Cams
MAX SUGGESTED LOADS
A - x1
B - x1
C - x1
D - x1
F - x1
G - x1
H - x1
K - x2
L - x1
M - x1
N - x1
(Colour 1)
x4
Steel Leg
Shelf support
x1
Handle
x3
Cover Caps
x2
(Colour 2)
Wall Fixing Kit
x2
D
G
L
H
K
P
I
M
O
C
A
F
J
N
Q
E
B
I
J
K
P
P
P
Q
O - x1
P - x4
Q - x2
E - x1
I - x2
J - x2
10Kg 10Kg
5Kg 5Kg
5Kg 5Kg
5Kg 5Kg
Soft Closing End
Panel Hinge (SCEPH)
(Screws included)
x6

1
2
3
Page 3
Gently hit to adjust.
Repeat this in the
following steps.
12
Gently hit to adjust.
Repeat this in the
following steps.
Gently hit to adjust.
Repeat this in the
following steps. Turn over
H
H
Jx2

Page 4
4
5
6
Kx2
HJ
K
Gently hit
to adjust.
G
Turn over
Rotate to tighten.
2
1

7
8
9
Page 5
G
Rotate to tighten
Gently hit
to adjust. G
H
J
K
Ix2

Page 6
10
11
12
Rotate to tighten
Gently hit
to adjust.
Turn over
F
F
GH
K
J
I
I

13
14
15
Page 7
E
Turn over
E
Rotate to tighten
Gently hit
to adjust.
E
F

16
17
Page 8
18
Rotate to tighten
Gently hit
to adjust.
F
E
H
I
I
J
K
G
L
L
F
E
H
I
J
K
G
I
Rotate to tighten
Gently hit
to adjust.

19
20
21
Rotate to tighten
Gently hit
to adjust.
Slide inside
Slide inside
J
J
K
KE
F
P
P
P
P
I
I
B
Page 9
C
Soft Closing End
Panel Hinge
Soft Closing End
Panel Hinge

22
23
24
Page 10
Rotate to tighten
Gently hit
to adjust.
Slide inside
J
J
FE
K
K
P
C
B
P
P
P
J
F
E
K
K
P
P
P
PJ
Q
Q
B
A
Turn over
Flat Head
Screw (14mm)
x16