Core Products Corona CRC511 User manual

Ex08
Ø3,5
25mm
30mm
Ø3,5
Cx12
Ø8
25mm
Ax42
28mm
Ø4,5
Bx30
Dx03
8x8
Zx18
GOLD
GREY
GREY
GOLD
SILVER
Gx03 Hx03
3/16 x 3/8
Jx10
50min P3
CRC511
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish. For the models with drawers, we also recommend
you use household spray polish occasionally on drawer grooves and runners as this will aid use. Please do not use detergents or chemicals
on your furniture.
PLEASE RETAIN THIS INSTRUCTION LEAFLET FOR FUTURE REFERENCE.
BEFORE YOU START ASSEMBLY
www.coreproducts.co.uk/parts
BATCH NUMBER
Please check that you have all the correct parts and fittings as detailed in the Parts List above.
In the unlikely event that you require to order spare parts please refer to your delivery note
for details of how to order on our Parts Website.
2018-0385
PARTS LIST
P3 P3
P3
Fx01
Warning!: Keep out of reach from
children, Keep away from eyes, if
product gets into eye rinse thoroughly
and repeatedly with water. Do not
digest, if swallowed seek medical
advise from doctor.
10g
01
02
03
15
14
12
11
13
04
05
06
06
06
06
06
06
07
08
08
08
08
10
10 09
3x
glue
Yx01 Xx01
RED = PAINT
The RED sachet contains touch up
paint for your furniture. Please
retain for use should you require it
at any point in the future. Application
is best with a small paint brush which
can be cleaned in water after use.
Keep out of reach from children, keep away from eyes, if
product gets into eye rinse thoroughly and repeatedly with
water. Do not digest, if swallowed seek medical advise
from doctor.
Warning!
OCTOBER, 10, 2018 (2)

01
02
03
02
04
07
08
06
04
05
03
02
06
06
06
06
07
08
08
08
08
04
02
6x
4x
B
B
J
J
JJ
J
J
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
J
J
J
J
J
BB
B
B
B
B
BB
B
BB
B
BB
B
B
B
B
B
E
E
E
E
E
E
E
E
B
Ø8
25mm
Ax42 Jx10
28mm
28mm
Ø4,5
Ø4,5
B
B
x18
x02
P3
P3
Ex08
Ø3,5
25mm
P3
+
+
!
!
!
!
(+)
(+)
(+)
(+)
GOLD
GOLD
SILVER

04
05
06
90º
06
06
01
90º
B
B
B
B
B
B
B
B
28mm
28mm
Ø4,5
Ø4,5
B
B
x04
x06
P3
P3 GOLD
GOLD
1Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
10
10
09
10
8x8
Zx18
x22
Z
Z
2
3
90º
B

07
08
08
C
D
G
H
C
C
F
"Join drawer sides to drawer fronts with caution not
to damage dovetail joints. Tap gently up and down the
drawer side until fully inserted into drawer front."
“Use a small
drop of glue."
15
13
12
14
11
11
11
11
IMPORTANT NOTICE
Please avoid opening all drawers simultaneously
as this could cause your furniture to fall forwards.
Where there is a risk of this occurring, especially in
environments with children or uneven floors
we recommend that this item of furniture is attached to your
wall using appropriate fixings (supplied).
30mm
Ø3,5
Cx12
P3
Dx03 Hx03
3/16 x 3/8
3x
Fx01
10g
glue
GOLD GREY
Gx03
GREY
Xx01
RED = PAINT
The RED sachet contains touch up
paint for your furniture. Please
retain for use should you require it
at any point in the future. Application
is best with a small paint brush which
can be cleaned in water after use.

09
Y
Y
Y
x01
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top using the 14mm screw + washer and securely tighten.
-
14mm14mm
25mm