Core Products DALLAS DL902 User manual

Height: 400 mm
Width: 925 mm
Depth: 550 mm
95 min
PLEASE RETAIN THIS INSTRUCTION LEAFLET FOR FUTURE REFERENCE.
BATCH NUMBER
DALLAS COFFEE TABLE
REF. DL902
BEFORE YOU START ASSEMBLY
Please check that you have all the
correct parts and fittings as detailed.
In the unlikely event that you require to
order spare parts or fittings please refer
to your delivery note for details of how
to order using our Parts website.
www.coreproducts.co.uk/parts
Customer help line: 01738 630555
We recommend that you build your
furniture on top of a soft clean cover to
ensure the unit does not get marked or
damaged during assembly.
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton for 48 hours or more so the contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture range has been carefully crafted from melamine faced manufactured board.
Each piece is manufactured to the highest standards using specialised computer controlled machinery to ensure accuracy.
Caring for your furniture.
Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to radiators or other direct sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Always use place mats, coasters or tablecloths to help protect against scratches and accidentally dropped items. Always use heat resistant mats when placing hot or
cold items on to surfaces.
Do not sit or stand on your furniture.
After care.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish and a household glass cleaner on glass surfaces.
Please do not use detergents or chemicals on your furniture.
After assembly remove all visible component identification stickers, these should remove easily however any remaining adhesive residue can be easily removed with
a label adhesive removal liquid available from most DIY or hardware stores.
02/10/2020

ASSEMBLY HARDWARE
x46
Dowel Minifix Bolt
x29
Cover Caps
x20
Colour 1
x29
Minifix Cams
x1
Drawer Slides
(Screws included)
Page 2
ASSEMBLY PARTS MAX SUGGESTED LOADS
A - x1
B - x1
C - x1
D - x1
E - x1
F - x1
G - x1
H - x1
I - x1
J - x1
K - x1
L - x1
M - x1
N - x1
Leg
x4
Screw
(28,5mm)
x8 x4
Screw
(50,8mm)
Cover Caps
x10
Colour 2
10 Kg.
8 Kg.
8 Kg.
FF
EE
CC
NN
AA
JJ
LL
MM
II
BB KK
GG
HH
DD

1
2
3
Page 3
12
Gently hit to adjust.
Repeat this in the
following steps.
Gently hit to adjust.
Repeat this in the
following steps.
G
HHH
Gently hit to adjust.
Repeat this in the
following steps.
G
H

Page 4
4
5
6
B
Front
Front
EEEEEEEE
FF
4
13
413

7
8
9
Page 5
2
1
Rotate 180°
Gently hit
to adjust.
E
B
FFF
G
H
C
N

10
11
12
Page 6
Rotate to tighten
Rotate to tighten
Gently hit
to adjust.
N
C
D
D
CNF
B
EE
G
H
Gently hit
to adjust.

13
14
15
Page 7
Rotate to tighten
A
A
D
N
C
B
F
G
H
E
Gently hit
to adjust.
A
D
N
C
B
G
H
E
28,5mm
Rotate

16
17
18
Page 8
Rotate to tighten
Gently hit
to adjust.
K
L
L
K

19
Page 9
21
20
Rotate
I
I
RotateRotateRotate
J
J
50,8mm
JL
K
I

22
Page 10
23
2424
M
Rotate to tighten
M
LL
I
M
L
I
Gently hit
to adjust.