Core Products Jasper HR104 User manual

Height: 1090 mm
Width: 1392 mm
Depth: 849 mm
120 min
CORNER DESK WITH BOOKCASE
REF. HR104
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton for 48 hours or more so the contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture range has been carefully crafted from melamine faced manufactured board.
Each piece is manufactured to the highest standards using specialised computer controlled machinery to ensure accuracy.
Caring for your furniture.
Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to radiators or other direct sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Always use place mats, coasters or tablecloths to help protect against scratches and accidentally dropped items. Always use heat resistant mats when placing hot or
cold items on to surfaces.
Do not sit or stand on your furniture.
After care.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish and a household glass cleaner on glass surfaces.
Please do not use detergents or chemicals on your furniture.
After assembly remove all visible component identification stickers, these should remove easily however any remaining adhesive residue can be easily removed with
a label adhesive removal liquid available from most DIY or hardware stores.
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE / RECEIPT FOR FUTURE REFERENCE.
BATCH
NUMBER
BEFORE YOU START ASSEMBLY
Please check that you have all the
correct parts and fittings as detailed
on the assembly instructions.
We recommend that you build your
furniture on top of a soft clean cover to
ensure the unit does not get marked or
damaged during assembly.
FOR DAMAGED/REPLACEMENT PARTS
Please visit
www.coreproducts.co.uk/parts
Core Products 10/2020

ASSEMBLY HARDWARE
x46
Dowel Minifix Bolt
x36
Cover Caps
x30
x36
Minifix Cams
Page 2
ASSEMBLY PARTS MAX SUGGESTED LOADS
A - x1
B - x1
C - x1
D - x1
E - x1
F - x1
G - x1
Cover Caps
x6
(Colour 2)
Flat Head
Screw (14mm)
x6
I - x1
J - x1
K - x1
x2
Nail-on Glide Plastic Slide
(25mm)
x6
E
G
J
C
O
H
D
A
F
I
B
K
M
N
L
M- x1
N - x1
O - x1
10kg
25kg
(Colour 1)
8kg
8kg 10kg
8kg 8kg
H - x1 L - x1

1
3
Page 3
2
12
Gently hit to adjust.
Repeat this in the
following steps.
Rotate
J
J
H

Page 4
4
5
666
2
1
Rotate 180°
Gently hit
to adjust.
J
H
G
Rotate
O
O
Rotate to tighten.

7
8
9
Page 5
Gently hit
to adjust.
HJ
G
O
HJ
G
Gently hit
to adjust.
C
Rotate to tighten.
Rotate to tighten.
Rotate to tighten.

10
11
12
Page 6
Gently hit
to adjust.
GJ
HO
C
D
Rotate
D
Rotate to tighten.

13
14
15
Page 7
D
O
G
J
C
Gently hit
to adjust.
Rotate
I
I
Rotate to tighten.

16
17
18
Page 8
N
M
Rotate
M

19
20
Page 9
I
21
Gently hit
to adjust.
MN
L
Gently hit
to adjust.
NM
L
I
Rotate to tighten.
Rotate to tighten.

22
23
24
K
K
N
M
L
I
Gently hit
to adjust.
F
Rotate
Page 10
Rotate to tighten.