Core Products TXG912 User manual

01
04
03
02
05
06
06
07
07
08
09
10
10
TXG912
Core Products are proud to be a member of ACID (Anti Copying in Design).
Our designs are supported through their intellectual property databank.
All copyright, design rights & intellectual property rights existing in this product,
instructions and related documents are and will remain the property of Core Products.
We will treat any infringement of these rights seriously.
Copyright © Core Products 11/2021

75min P3
PARTS LIST
25mm
Ø4,5
F
K
x12
x04
P3
Ø8
25mm
Ax24
GOLD
Dx12
40mm
Ø4,0
GOLD
Cx18
GOLD
Ø3,5
14mm
P3
P3
Ex12
Zx28
8 x 8
Yx01
L
B
x04
x02
01
02
05
04
03
08
06
06
07
07
09
10
10
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings
as detailed on the assembly instructions.
FOR DAMAGED/REPLACEMENT PARTS
Please visit
www.coreproducts.co.uk/parts
Batch
Number
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE/RECEIPT FOR FUTURE REFERENCE
2021-0315
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and wood fibre based composite boards. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish. For the models with drawers, we also recommend
you use household spray polish occasionally on drawer grooves and runners as this will aid use. Please do not use detergents or chemicals
on your furniture.
TXG912
© Core Products 11/2020
35mm
Ø4,5
H
Gx12
x02
P3 GOLD
BLACK
P3
30mm
Ø3,5
Mx04
GOLD
P3
Xx01
RED = PAINT
The RED sachet contains touch up
paint for your furniture. Please
retain for use should you require it
at any point in the future. Application
is best with a small paint brush which
can be cleaned in water after use.
Keep out of reach from children, keep away from eyes, if
product gets into eye rinse thoroughly and repeatedly with
water. Do not digest, if swallowed seek medical advise
from doctor.
Warning!

01
02
03
04
03
08
02
A
A
A
A
E
E
E
E
A
A
A
A
A
A
A
A
A
A
A
A
L
L
B
B
C
C
L
L
A
A
A
A
E
E
E
E
A
A
A
A
E
E
E
E
Ø8
25mm
Ax12
E
E
x06
x06
Ø8
25mm
Ax12 Cx02
GOLD
Ø3,5
14mm
P3
LB
x04 x02
25mm
Ø4,5
Fx12
P3 GOLD
LL
180º.
180º.
E
E
C
B
03
08
02
04
F
F
F
F
FF
F
01
Build your furniture on a soft clean
cover to stop the components
getting marked during assembly.
01
BACK
BACK

04
05
06
08
08
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
ZZZZZ
Z
ZZZ
Z
ZZ
ZZ
ZZZZZ
Z
07
07
90º
180º
90º
Zx28
8 x 8
3
Dx12
40mm
Ø4,0
GOLD
P3
DDD
D
D
D
D
D
D
D
D
D
05
1
2
06
06
HHH
HH
H
H
H
HH
H
H
H
7,5mm
10mm
06 06
H35mm
Ø4,5
x12
P3 GOLD
BACK
05
FRONT
10mm
7,5mm

07
IMPORTANT NOTICE
Please avoid opening all drawers or doors
simultaneously as this could cause your furniture
to fall forwards. Where there is a risk of this
occurring, especially in environments with children
or uneven floors we recommend that this item of
furniture is attached to your wall using appropriate
fixings (supplied).
08
09
Cx08
GOLD
Ø3,5
14mm
P3
!
1ª 2ª 3ª
1ª 2ª 3ª
ADJUSTING HINGE
C
C
10
10
10
10
09
C
C
C
C
C
C
Kx04
Cx08
GOLD
Ø3,5
14mm
P3
K
K
K
K
K
K
K
K
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
G
G
M
MM
M
C
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top using the 14mm screw + washer and securely tighten.
-
Yx01
Y
Y
14mm14mm
25mm
Gx02
BLACK P3
30mm
Ø3,5
Mx04
GOLD
P3
Xx01
RED = PAINT
The RED sachet
contains touch up
paint for your furniture.
Please retain for use
should you require it
at any point in the future.
Application is best with
a small paint brush which
can be cleaned in water
after use.