Cornered Audio A3 User manual

Lorem ipsum 01
02 Lorem ipsum
HOW TO
CORNER
YOURSELF
WITH GREAT
SOUND
Contents of the manual are subject to change without notice. CORNERED Audio does not accept any
liability for loss or damage caused or alleged to be caused directly or indirectly by these instructions.
CORNERED Audio makes no guarantee of any kind with regard to these instructions.
Copyright 2010 CORNERED Audio ApS, Denmark.
Introduction to Cornered A3

Contents
INTRODUCTION
Welcome to CORNERED speakers
GETTING STARTED
1. Connect the cables
2. Find the perfect spot
3. Mount the speakers
DAILY USE OF YOUR SPEAKERS
A powerful experience
Cleaning and maintenance
Disposing of electrical appliances
NOTES FOR THE PROFESSIONAL INSTALLER
INSTALLING THE SPEAKER
SPECIFICATIONS
Warranty & service
DECLARATION OF CONFORMITY
03

Introduction
With the purchase of your CORNERED speakers, you can enjoy two things in one:
Unique design and excellent sound.
CORNERED speakers feature a one-of-a-kind 90-degree triangular design that makes
for a discreet and elegant installation anywhere in your home - in corners, on the wall,
below the ceiling, on shelves and as a center and rear channel for surround sound.
But good looks aren’t everything. CORNERED speakers also offers excellent sound
quality. In fact, CORNERED speakers reproduce a natural three-dimensional sound
stage that fills your room with sound – and strives at making listening to music one of
your favorite activities.
To get the most out of your CORNERED speakers – and make the installation process
as easy as possible – please take a minute to study this manual.
Enjoy!
Congratulations!
You are up for a great looking and great
sounding experience
05

Connecting CorneredInstallation guide
1. Connect the cable
2. Find the perfect spot
3. Mount the speakers
2 Connect the power cable
Note:
Istall the power cable and optional line cable BEFORE mounting the
speakers to wall or ceiling! It is not possible to connect the power and line level
cables once the speakers have been installed.
•Install the power cable into the power socket in the rear of the cabinet
•The A3 allows you to connect a wired source in addition to the
Bluetooth connection. The speaker will automatically mix between the
inputs, giving the wired connection priority. So if bluetooth is
connected and the wired connection (a TV or like) is active, Bluetooth
will be disabled. When the sired connection is turned off, BT will be
enabled agian.
•f you wish to connect a source to the A3, removethefrontgrilleto
accessthecableterminal - 3
Getting started
A3 is an installable active speaker with
Bluetooth 5.0. Follow 3 easy steps to install
your new CORNERED speaker and soon you’ll
be cornered by sound in a class of its own:
1
• Runthelineline cablethroughthetubepositionedattherearofthecabinet
The cable will come out in the middle of the front
• Connectto the Phoenix plug with left, right and ground as shown in
illustration (3)
•A3 can power an additional C3 passive speaker: Connect plus(+)cable and
minus on your speaker cable to the Phoenix plug and connect to the Phoneix
socket located to the left of the tube (3)
•
Remove the front cover
1
2 Install the power cable
3 Connecting speaker cable
06 07
< Push on the side of the grille and pull
out.

PlacementInstallation guide
• 3. Mount the speakers
The C3 is simply installed by screwing through the cabinet
• Remove the front cover (you’ll see the two mounting
holes above and below the speaker units)
• Place speakers in desired position
• Mark drilling positions on the wall by shading through the
2 mounting holes
• Drill holes in the wall and use 4mm rawlplugs and the
enclosed 3mm screws and washers.
• Reposition the speakers in desired position and mount
the screws
• Reinstall the front cover
Operation
Turn on the power by pushing the round switch in the top of the
cabinet. A blue LED light will come on and a voice will confirm
"Power on". Push again to power off.
Connect to Bluetooth by activating BT on your device, Search for
"CORNERED A3" and connect. A voice will confirm "Connected".
If you wish to send a BT signal from another device, disconnect (a
voice will confirm "Disconnected") and connect from the other
device. The Cornered A3 will automatically reset any BT
connection when powered off.
Mounting the screws
1
Application examples
Vertical in corner
Vertical on wall
Horizontal in corner
Horizontal on wall
08 09
• The Line input will override BT when active
• The tube allows for cables with a maximum diameter of 10mm
•When connecting a passive speaker use speaker cables with a
wire thickness of min. 1,5mm2
• If the red amplifier output is connected to the black speaker input
(out of phase), the stereo imaging will be blurred, and the bass
output will be dramatically reduced
Important note:

Mounting in corners that are not exactly 90 degrees
Even if the corners in your home are not exactly 90 degrees, you can still mount your
new CORNERED speakers in the corner.
• Ifthecornerislessthan90degrees,simplyplacethespeakercabinetasdeepin
the corner as possible. This will leave a little space behind the cabinet and the
walls, but the speakers will still appear with a nice finish in the corner
• Ifthecornerismorethan90degrees,justmountthespeakercabinetontothe
side wall – and leave some air behind the rear of the cabnet. This will not be
visible from the front, and the speakers will still present themselves with a nice
finish in the corner
NotesInstallationguide
Daily use of your
speakers
Cleaning and maintenance
To keep up the good looks, clean the cabinet with a soft, dry micro-fiber cloth. The
front cover can be vacuumed and wiped carefully with a well-wrung, lint-free cloth
with a mild all-purpose cleaner. If you need to clean the speakers behind the front
cover, avoid wiping the dome tweeter as it can change the geometry of the dome and
reduce the sound quality significantly.
Disposing of electrical appliances
When eventually disposing of the product, do not mix it with general household waste.
There is a separate collection system for used electronic products in accordance with
legislation that requires proper treatment, recovery and recycling. Private households
in the EU member states, Switzerland and Norway may return their used electronic
productsfreeofchargetodesignatedcollectionfacilitiesortoaretailer(ifyoupur-
chase a similar new one). For countries not mentioned above, please contact your
local authorities for the correct method of disposal. By doing so, you will ensure that
your disposed product undergoes the necessary treatment, recovery and recycling
and thus prevent potential negative effects on the environment and human health.
10 11

ProfessionalsInstallationguide
Installation
Before installing
As CORNERED top-boxes are very light, make sure that the wall structure is solid and
can support the weight of the speaker before installing the speaker. Also, make sure
that you comply with all local health and safety regulations.
A one-person job
The low weight allows the products to be installed easily by one person. Drive units
aspeaker out and Phoenix input can be easily accessed behind the front cover,
which can be removed without tools in a matter of seconds.
Safety wire
In installation terms, the CORNERED top-boxes are ‘as much brackets as they
are speakers,’ so no safety wire is needed, just as you don’t need a safety wire
from the wall to a bracket.
Coverage
Wide dispersion even at high frequencies
CORNERED speakers are designed with emphasis on uniform and wide power
re-sponse. Special emphasis is placed on phase through the crossover point and
cone/dome geometry. As an example, the large surround of the tweeter dome
ensures very wide dispersion also at high frequencies.
• Onecabinetoffersapp120x120degreedispersion.Cabinetscanbecoupledto
gether to increase coverage
• TwoCORNEREDcabinetscanbecoupledtogetherbacktobackandmounted
flush onto walls and ceilings while offering 180 degrees of coverage with
minimum phase cancellation between the cabinets
Notes for the
professional installer
• Threecabinetscanbemountedtogetheraroundacorner,offering270degree
coverage
• Andfourcabinetscanbemountedtogetherandhungfromtheceiling,offering
360 degree of dispersion
Application examples
12 13
1a: Vertical in corner.
1b: Vertical on wall.
2a: Horizontal in corner.
2b: Horizontal mid-wall.
3: Coupled together in
mid-wall position.
4: Coupledtogetherin
mid-ceiling position.
1a 1b
2a 2b
3
4

Facts
Specifications
Warranty & service
For warranty information, please refer to your local CORNERED distributor or dealer.
Spare parts for your CORNERED speakers are available through your local CORNERED
distributor. In case you are not able to source spare parts locally, please contact us
16 17
A3
Woofer:
Tweeter:
Voltage::
Input sensitivity:
Frequency response:
BT range :
Dispersion:
Connectiont:
Finish:
Measurement:
Weight:
Power consumption
4” long throw
1” silk dome with magnetic oil
110-240V 50-60 Hz
500 mV RMS
60 - 25 kHz
30 meters line of sight
120x120 degree
Phoenix
White, black
(HxWxD)371mmx174mmx130mm
2,7kg
300mW - idle
174mm
117 mm371 mm
Front Top plate
Declaration of
conformity
Manufacturer:
CORNERED Audio ApS
Farum Gydevej 65 1. sal
3520 Farum
Denmark
We, CORNERED Audio ApS, declare under our responsibility that the following
product(s):
A3
Type: Speaker
…are in conformity with:
COUNCIL DIRECTIVE of 3 May 1989 on the approximation of the laws of the Member
Statesrelatingtoelectromagneticcompatibility(89/336/EEC)
..and has been manufactured in conformity with the following national standards that
implements a harmonized standard:
EN 55013
Limits and methods of measurement of radio disturbance characteristics of broadcast
receivers and associated equipment.
Hans V. Madsen / Founder
01.01.2022
Table of contents
Other Cornered Audio Speakers manuals
Popular Speakers manuals by other brands

Shockwave
Shockwave IMT7000 quick start guide

Boston Acoustics
Boston Acoustics Designer Series 336pt user guide

Philips
Philips 3000 series manual

Sven
Sven MS-90 Operation manual

Abbingdon Music Research
Abbingdon Music Research Reference Class Proffessional Monitor LS-77 owner's manual

PRIXTON
PRIXTON ALOHA LITE manual