Cory Everson 6000HT User manual

Cory Everson Home Trainer
Model No. 6000HT
Owner’s Manual
Please read all the instructions before using this product.
Consult a physician before beginning any exercise program or strenuous activity
Do not allow more than one person on the product at any time.
Do not allow small children to use unless supervised by an adult.
ADULT ASSEMBLY REQUIRED.
To ensure warranty protection, register your Home Trainer at:
www.pureglobalbrands.com
Cory Everson is a Trademark of
Pure Global Brands, Inc.
This product is not
suitable for children under
3 years of age. It contains
small parts which may
cause choking.

OWNERS MANUAL
CUSTOMER SERVICE INFORMATION
Thank you for purchasing our Cory Everson™ Home Trainer.
At Pure Global Brands, we want all of our customers to be completely satised with their purchase.
Please take time to review the contents of the product you just received to make sure that all of the
parts are included. If you nd that any parts are missing or damaged, we will happily provide replace-
ment parts at no charge within 30 days of purchase. Please keep in mind that for select damaged part
replacement requests, we will require a photo for submission to our quality control ofce.
To order these parts, or if you have any other questions or concerns about this Pure Global product,
please e-mail the Pure Global Brands, Inc. customer service department at customerservice@pureg-
bi.com or contact us at 1-866-498-5269. You can also visit our website at: www.pureglobalbrands.com
If you request replacement parts, please be sure to include the following information in your corre-
spondence:
YOUR NAME
YOUR SHIPPING ADDRESS
YOUR EMAIL ADDRESS
RETAILER WHERE YOU PURCHASED PRODUCT
DATE OF PURCHASE
ORDER # (IF AVAILABLE)
PRODUCT MODEL #: 6000HT
SERIAL #
PRODUCT NAME: Cory Everson Home Trainer
PART # (located in this manual)
QUANITITY NEEDED
PICTURE OF DAMAGED PART(s) – SUBMIT VIA Email , Fax, or Mail
Again, thank you for purchasing a Pure Global Brands product.
Sincerely,
Customer Service
Pure Global Brands, Inc.
1-866-498-5269

LIMITED WARRANTY
Pure Global Brands, Inc. warrants this product to be free from defects in workmanship and materials
under normal use and conditions for the duration of the period outlined below FROM THE DATE OF
ORIGINAL PURCHASE. This Limited Warranty is not transferrable and is available only for the origi-
nal purchaser of the Product. The Company’s obligation under this warranty is limited to replacing or
repairing the Product, at the discretion of the Company.
The various components of this equipment are warranted against defects and workmanship for the
following time period(s):
• Steel Frame 1-year.
• All Other Parts 90-Days
All warranty coverage extends only to the original retail purchaser from the date of purchase.
Cory Everson’s obligation under this Warranty is limited to replacing or repairing, at Cory Everson’s
option, the product at one of its authorized service centers. All products for which a warranty claim is
made must be received by Cory Everson at one of its authorized service centers and accompanied
by sufcient proof of purchase (photocopy of the original store receipt, indicating the date of pur-
chase). All freight and handling fees are the responsibility of the consumer to pay, both to and from
Cory Everson. All warranty claims must be preauthorized by Cory Everson. Preauthorization can
be obtained by calling 866-498-5269. This warranty does not extend to any product or damage to a
product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage, or
repairs not provided by a Cory Everson authorized service center or for products used for commercial
or rental purposes. This warranty does not cover ordinary wear and tear, weathering, failure to follow
directions, improper installation, improper maintenance, or acts of Nature (such as damage caused
by wind, lightning, snow, water, or ice). Weather damage, damage caused by unauthorized repair
work or damage caused by improper use of the products are not covered by the product warranty. No
other Warranty beyond that specically set forth above is authorized by Cory Everson.
CORY EVERSON FITNESS IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPE-
CIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH
THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RE-
SPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR
PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR
OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLU-
SION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORD-
INGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE WARRANTY EX-
TENDED HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES AND Cory Everson
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION
TO THE TERMS SET FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATION
ON HOW LONG AN IMPLIED WARRANTY LASTS. ACCORDINGLY, THE ABOVE LIMI-
TATION MAY NOT APPLY TO YOU.
This warranty gives you specic legal rights. You may also have other rights, which vary from state to
state.

WARNING
CHOKING HAZARD – Small parts
NOT for children under 3 years.
! Warning!
While every attempt is made to ensure the highest degree of protection in all
equipment, we cannot guarantee freedom from injury. The user assumes all risks
of injury due to use. All merchandise is sold on this condition, which no
representative of the company can waive or change.

WARNING
IMPORTANT – PLEASE READ!
WARNINGS – GENERAL SAFETY ADVICE
Please read these instructions in their entirety before use and retain for future reference.
Ensure that this product has been assembled correctly, per the instructions in the manual.
This manual is designed to help you assemble, adjust, maintain and use the product. It contains im-
portant information regarding your safety and your use of this equipment.
● IF YOU EXPERIENCE any pain or tightness in your chest, irregular heartbeart, shortness of
breath, faintness, dizziness, or other unusual discomfort while exercising, STOP and immediately
consult your physician and/or obtain medical assistance.
● Warm up at least 5-10 minutes before each workout and cool down for at least 5-10 minutes
afterwards.
● Before using this product, inspect your machine; make sure that all nuts, bolts, hardware and
attachments are secure and in working order, replace any worn, defective or missing parts.
● This machine is intended for indoor home use only, it is not designed for commercial use.
● ALWAYS consult a physician before beginning any exercise program. Ask your doctor to
evaluate your present tness level and determine the exercise program that is most apporopriate for
your particular age and/or physical condition.
● DO NOT allow children to use, climb on, or play near this product.
● NEVER allow more than one person at a time on this product.
● ALWAYS ensure that the product is on level ground.
● NEVER hold your breath while exercising.
● ALWAYS rest adequately between workouts to allow your muscles to tone and develop.
● DO NOT wear loose tting clothing, belt buckles or jewelry, including but not limited to rings,
chains, and pins before commencing exercise; this can be extremely dangerous.
● DO NOT stand or kneel on the seat cushion.
● ALWAYS USE CARE when loosening the Lock Knob to fold your Home Trainer to ensure that it
does not suddenly close. Failure to use proper caution may result in injury or damage to the product.
● ALWAYS wear the appropriate tness footwear. DO NOT use this product barefooted or with
socks only.
● ALWAYS ensure that there are no twists or snags in the resistance cords, and/or obstructions
blocking free movement of the cords and the pulley system before beginning an exercise.
● ALWAYS ensure that the Handle and/or Ankle Attachments are properly secured before beginning
an exercise.
● ALWAYS ensure that the seat post is fully and properly inserted into its housing before putting any
weight on the seat.
● NEVER attempt to use the resistance cords barehanded or with any attachment that was not
specically intended for use with the Cory Everson Home Trainer.
● ALWAYS keep your extremeties, especially your ngers away from the pulleys. Only use the
attachments that shipped with your Home Trainer.
● ALWAYS make sure that the frame of your Home Trainer is FULLY opened and the Lock Knob is
securely in place and safely situated before using it or applying your weight to the seat, especially
after unfolding it from the storage position.
● ALWAYS double check your Handle attachment connection(s) when adding/removing resistance
cords or switching the Ankle attachment position to ensure that it is safely and securely attached.
● ALWAYS safely store your Home Trainer so it does not present a tripping or other safety hazard.
● NEVER exceed the Maximum Weight Limit of: 220LBS.
● Dispose of all packaging materials safely and per local ordinance.
● Please retain this information for future reference.

6000HT EXPLODED VIEW

6000HT PARTS LIST
Part # Description Quantity
1 Main Frame 1
2 Rear Support 1
3 Low Pulley Bar 1
4 Middle Pulley Bar 1
5 High Pulley Bar 1
6 Foot Plate 1
7 Padded Back Support 1
8 Padded Seat 1
9 Seat Bracket (L) 1
10 Seat Bracket (R) 1
11 Adjustable Seat Bracket 1
12 Spring Clip 1
13 Foot Plate Tube (L) 1
14 Foot Plate Tube (R) 1
15 Safety Lock (L) 1
16 Safety Lock (R) 1
17 Pulley 18
18 Pulley Bracket 12
19 Gray Resistance Band (Light) 2
20 Red Resistance Band (Medium) 2
21 Black Resistance Band (Heavy) 2
22 Handles 2
23 Leg Strap 1
24 50 mm Foot Pad 2
25 Seat Adjustment Housing 1
26 Resistance Band Storage Hook 1
27 Foot Knob 2
28 Screw M4 X 10mm 8
29 Female Bolt 12
30 Male Bolt 12
31 Pulley Shaft M10 X 97mm 12
32 E Clip (Large For 9mm Shaft) 16
33 E Clip (Small For 5mm Shaft) 2
34 Screw M6 X 102mm 2
NOTE: For your convenience, many of the parts on this list have been
pre-assembled. The parts you need for assembly are shaded and in bold.

6000HT PARTS LIST (CONT.)
Part # Description Quantity
35 Seat Pad Shaft M6 X 116mm 1
36 Screw M10 X 113mm 2
37 Carriage Bolt M8 X 128mm 1
38 Flat Washer 23mm DIA For 5/16” Shaft 1
39 Screw M6 X 14mm 8
40 Allen Bolt M8 X 15mm 12
41 Flat Washer 20mm DIA For 5/16” Bolt 12
42 Spacer 4
43 Screw M8 X 64mm 1
44 Screw M8 X 88mm 1
45 “Bullet” End Cap For Foot Bar 2
46 50mm End Cap 2
47 Transportation Wheel 2
48 Foot Plate Storage Hook 1
49 Dome Nut 2
50 M8 Knob 1
51 Bracket 2
52 Protection Bracket 1
53 Spring Pin 1
54 Plastic Washer 1
55 Program Card Holder 1
56 Program Card Set 1
NOTE: For your convenience, many of the parts on this list have been
pre-assembled. The parts you need for assembly are shaded and in bold.
HARDWARE PACK
x 12 PCS x 12PCS

ASSEMBLY INSTRUCTIONS
Step 1. Assemble Frame Pieces
A. Place the Rear, short folding leg of the Main Frame
(1) into the Middle Pulley Bar (Bar with no hook ends)
(5). Make sure the bolt holes in the short leg are clos-
est to the bolt holes in the Middle Bar insert. Secure
with 4x Allen Bolt M8 (40) and 4x Washers (41).
B. Place the front lower end (seat cushion without
logo) of the Main Frame (1) into the Lower Pulley Bar
(Bar with 2x round holes) (4). Make sure cord ends
on Lower Bar are facing out to same side as the seat
cushion. Secure with 4x Allen Bolt M8 (40) and 4x
Washers (41).
C. Place the Upper end of the Main Frame (1) into the
High Pulley Bar (Bar with 2x slots) (3). Secure with 4x
Allen Bolt M8 (40) and 4x Washers (41).
D. Unscrew Nut and remove the long bolt from the
Adjustable Seat Bracket (11). Thread the Long Bolt
through the 2 holes in the Seat Brackets (9 &10)
Secure with same Nut.
E. Unscrew the Locking Knob on the side of the Rear
Leg. Keeping your foot securely on the Rear Leg,
slowly extend the front Leg forwards. Once the
Home Trainer is fully open, secure the Locking Knob.
Be careful when releasing tension that the
Knob is fully locked and the Trainer does not suddenly
close.
F. Insert the Foot Plate (6) to the Low Pulley Bar (3).
Step 2. Connect the Handles.
Clip one Handle Attachment to the top end of the
each of the Resistance Band assemblies. Connect the
Handle attachment to one or more Resistance Bands.
CAUTION: NEVER release your grip on the handles
while the Resistance Bands are under tension.
See section on Using the Home Trainer for weight
conversions regarding the Resistance Bands.
Step 3. Connect the Ankle Strap.
To use the Ankle Strap, rst secure the Ankle Strap to
your Ankle. Loop the free end through the O-ring and
then tighten the strap so it is snug but comfortable.
Next, secure the strap to your leg using the Velcro
fastener. Once secure, attach the Ankle Strap to one
of the Lower Resistance Band Assemblies using the
Spring Clip on the end.
Note: This Home Trainer comes with one (1) Ankle Strap. To
purchase additional handles and/or straps, please visit
www.pureglobalbrands.com.

ASSEMBLY INSTRUCTIONS
Step 4. Attach the Program Card Holder
The Program Card Holder has two tabs that stick out
from the bottom. Slide each tab into the slots in the
High Pulley Bar until the Program Card Holder is
almost ush to the tubing. The tabs to hold the Pro-
gram Cards in place should face towards the padded
seat. Make sure that the plastic tabs extend through
both sides of the High Pulley Bar, and that the Pro-
gram Card Holder is angled back slightly.
Step 5. Using the Program Cards.
The Program Card Holder has tabs to hold all the
Program Cards. It is recommended that you leave
the User Information and the Warm Up/ Cool Down
Program card in the Holder for easy reference while
working out. To view the different cards, slide the
Program you wish to follow so it is on top of the other
cards.

RESISTANCE BAND WEIGHT CONVERSION
The 3 Resistance Bands are equal to a weight resistance of 5, 12, and 20 pounds
each:
Light = Blue (5lbs)
Medium = Gray (12lbs)
Heavy = Black (20lbs)
5lbs = 1 Blue Band
12lbs= 1 Gray Band
17lbs= 1 Blue Band and 1 Gray Band
20lbs= 1 Black Band
25lbs= 1 Blue Band and 1 Black Band
32lbs= 1 Gray Band and 1 Black Band
37lbs= 1 Blue Band, 1 Gray Band and 1 Black Band
MAINTENANCE
Your unit has been carefully designed to require minimum maintenance. To ensure this,
we recommend that you do the following:
• Keep your unit clean by wiping it down with soap and water.
• Always make sure that the equipment is secure and show no signs of wear and
tear.
• Regularly check the tightness of nuts and bolts.
• Please place on an open area on a hard surface.
• Recommended as an indoor item.

FOLDING, MOVING, and STORING YOUR HOME TRAINER
Connect both the Handles
and the Ankle Strap to the
Top Pulleys. Remove the
Foot Plate from the Lower
Bar and set it aside.
Lift the seat Adjustment
Bracket support up and out
of its housing, and slowly
lower the seat so the it is
resting on the Main Frame.
Disengage the Safety Lock, on
the side of the Rear Support by
loosening the Knob.
Be sure to keep tension
on the rear leg, so that
the unit does not
suddenly close!
Fold the Home Trainer to-
gether so that the Rear Sup-
port Leg is resting against
the Main Frame.
Secure the Home Trainer in
the Folded position, by tight-
ening the Knob in the Safety
Lock.
Stand the Home Trainer up
so it is vertical to the ground.
Attach the Foot Plate to the
Main frame on the Storage
Hook.
Wrap the Resistance Bands,
one band at a time, around
the Plastic Knob on the
reverse side of the Main
Frame.
If storing your Home Trainer
in a closet or similar loca-
tion: Wheel the Trainer to
the desired location and se-
cure it upright. ALWAYS use
the wheels when moving.
If storing your Trainer under
a bed, wheel it to the loca-
tion and SLOWLY lower it so
that the cushions are facing
UP. Once laid down, slowly
slide it using the wheels.

14
WARM UP EXERCISES
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-
down. Do the entire program at least two and preferably three times a week, resting for
a day between workouts. After several months, you can increase your workouts to four
or five times per week.
Warming up is an important part of your workout, and should begin every session. It
prepares your body for more strenuous exercise by heating up and stretching out your
muscles, increasing your circulation and pulse rate, and delivering more oxygen to your
muscles. At the end of your workout, repeat these exercises to reduce sore muscle
problems. We suggest the following warm-up and cool-down exercises:
Inner Thigh Stretch
Sit with the soles of your feet together
with your knees pointing outward. Pull
your feet as close into your groin as
possible. Gently push your knees towards
the floor. Hold for 15 counts.
Hamstring Stretch
Sit with your right leg extended. Rest the
sole of your left foot against your right
inner thigh. Stretch toward your toe as far
as possible. Hold for 15 counts. Relax and
then repeat with left leg extended.
Head Roll
Rotate your head to the right for one
count, feeling the stretch up the left side
of your neck. Next, rotate your head back
for one count, stretching your chin to the
ceiling and letting your mouth open.
Rotate your head to the left for one count,
and finally, drop your head to your chest
for one count.
Shoulder Lift
Lift your right shoulder up toward your ear
for one count. Then lift your left shoulder
up for one count as you lower your right
shoulder.
WARM UP/COOL DOWN EXERCISES

15
WARM UP EXERCISES CONTINUED
Calf-Achilles Stretch
Lean against a wall with your left leg in
front of the right and your arms forward.
Keep your right leg straight and the left
foot on the floor; then bend the left leg
and lean forward by moving your hips
toward the wall. Hold, then repeat on the
other side for 15 counts
Toe Touch
Slowly bend forward from your waist,
letting your back and shoulders relax as
you stretch toward your toes. Reach down
as far as you can and hold for 15 counts.
Side Stretch
Open your arms to the side and continue
lifting them until they are over your head.
Reach your right arm as far upward toward
the ceiling as you can for one count. Feel
the stretch up your right side. Repeat this
action with your left arm.
WARM UP/COOL DOWN EXERCISES

Some sample exercises are included below targeting common muscle group(s) many people want
to develop and tone. You will nd these, and additional exercises on the Program Cards your Home
Trainer shipped with.
SAMPLE EXERCISES
Refer to the Program Cards included with your Home Trainer
for additional exercises
Sit and hold Handles above shoulders,
palms facing inward. Crunch (bend) chest
forward without moving lower back away
from seat, keeping hands next to chest
and head aligned with spine and return.
Pulleys: High Bar
Seat: UP position
Attachments Used: Handles
Sit and hold Handles next to chest, palms
facing downwards. Push straight out away
from chest and return.
Pulleys: High Bar
Seat: UP position
Attachments Used: Handles
Crunches
Targets: Abdominals
Bench Press
Targets: Chest and Arms
Stand with one foot on Foot Plate and Leg
Strap around other ankle, hold onto High
Pulley Bar. Curl heel to buttocks keeping
upper leg and knee still and return.
Pulleys: Low Bar
Seat: DOWN position
Attachments Used: Leg Strap
Leg Curl
Targets: Leg (Hamstring)

Question: What do I do if the Resistance Band(s), Handle Attachment(s) or the Ankle Strap need
to be replaced?
Answer: Please email [email protected] or call Customer Service at 866-498-5269
(9 AM to 5 PM Monday-Friday). If you are outside of the warranty period, you can visit:
www.pureglobalbrands.com to purchase replacement parts.
Please note that resistance bands are only sold in sets of all (3) three.
Warranty requests must be accompanied by adequate Proof of Purchase. A picture of the damaged
part or a request to have the part(s) shipped to Pure Global Brands may be issued.
Question: What do I do if I’m missing screws, bolts or other assembly hardware?
Answer: Please email [email protected] or call customer service at 866-498-5269.
For items missing from your packaging, there is a 30-Day period from the original date of purchase
to notify Pure Global Brands of this issue.
Question: Am I only supposed to have one Ankle Strap?
Answer: This home trainer only ships with one ankle strap. To purchase additional Ankle Straps,
please visit us on the web at www.pureglobalbrands.com
Question: One of the Resistance Bands was twisted upon opening of the Box. What should I do?
Answer: In rare cases, a Resistance Band may become snagged during shipping. To x this issue,
simply pop off the “e-clip” (a small black “e” shaped washer) located on the Lower Pulley Bar for the
affected Resistance Band using a athead screwdriver or similar tool. NOTE: The e-clip may pop off
suddenly. Ensure the ground is clear of any clutter so it is not lost. Remove the smooth black bolt and
untwist the Pulley/Resistance Band assembly. Untwist the Resistance Band and replace the bolt and
e-clip.
FREQUENTLY ASKED QUESTIONS