Costway BB5402 User manual

Changing Table
Changing TableChanging TableChanging TableChanging Table
BB5402BK/GR/WH
BB5402BK/GR/WHBB5402BK/GR/WHBB5402BK/GR/WHBB5402BK/GR/WH
BB5402
Changing Table

Components
Conform safety regulations ASTM F2388-18
0
-
12M
24.2LBS
IMPORTANT
WARNING!
TO AVOID INJURY OR DEATH:
DO NOT LEAVE YOUR CHILD UNATTENDED.
DO NOT ALLOW OLDER CHILDREN TO CLIMB OR PLAY
ON THE CHANGING TABLE.
SAFETY PRECAUTIONS
Read all instructions before use of the changing table. Keep instructions for future use.
: Children can suffer serious injuries if falling from changing tables.
Falls can happen quickly.
children within arm's reach.
-
Keep the changing table away from stoves, heaters, open fires and other hazards.
Do not use accessories other than those supplied and approved by the manufacturer.
Promptly replace worn our or torn broken parts.
Do not use this changing table if any part is broken, torn or missing.
This product is not intended for commercial use.
Fall Hazard
Keep
secure this unit/pad to the support surface/frame by manufacture’s
instructions for securing the changing unit/pad. See instructions.
Always
SUFFOCATION HAZARD: Sleeping in changing area can cause choking in children.
Changing areas are not designed for safe sleeping.
NEVER allow baby to sleep in/on changing table/pad/area.
The changing table is intended for newborns and infants under 24.2lbs.
CONGRATUALTIONS on your puchase of the childcare deluxe diaper changing table
This product has been designed and developed with safety, comfort and functionality in mind.
Please take the time to read this manual carefully before using this product and keep it in safe
place for future reference.
CONTENTS
Assembly contents list
Assembly / Operating instructions
How to care for your childcare changing table
Due to variations in style and design of our products, the photographs and illustrations shown in this instruction manual are
generic, therfore product fabrics, colour and design may vary from images shown.

ASSEMBLY CONTENTS
CHECK WHAT YOU HAVE RECEIVED ...
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact us.
ASSEMBLY / OPERATING INSTRUCTIONS
BOTTOM SHELF ASSEMBLY
SUPPLIED LOOS IN BOX
1x top assembly
1x bottom shelf
6 x screws
1x screw driver
2x leg sets
1.Unfold the leg sets,and connect the bottom shelf to the four legs with screws.
Note: Put the side with Letter sticker A,B,C,D outside,and connect the legs A and D to
to the short shelf tube,and connect the legs B and C to the long shelf tube.
2.Connect the top assembly with the leg sets.
Note:fold the leg sets before connecting,and connect the leg tube A to A,B to B,
C to C,D to D.
Fold it first
1 x shelf tube
ASSEMBLY / OPERATING INSTRUCTIONS
ACCESSORY TRAY HOLDER
1.
Place the secondary lock down
2.
Ensure that accessory tray holder frame is locked correctly by
STORING YOUR CHANGE TABLE
1. Pull safety locks forward 2. Lift the frame safety locks 3. Close frame
on both sides of the frame.
on accessory tray and lift upwards
CLEANING
To ensure the long-lasting use of your changing table, dry it with a soft absorbent cloth after use.
Use a damp cloth to clean the frame. Do not use abrasive cleaners. Allow it to dry thoroughly. Re-
movable and non-removable farbic covers and trims maybe cleaned using a damp cloth with soap
or mild detergent. Allow it dry completely before folding or storing it away. Do not dry clean, or use
bleach on fabrics or trims. Do not machine wash, tumble or spin dry, unless the care labelling on
the prosuct permits these methods
MAINTENANCE
Check changing table regularly to ensure that locking devices and components are secure and
working properly. Always check parts regularly for tightness of screws, nuts and other fasteners –
tighten or replace if required. To maintain the safety of your changing table, seek prompt repairs for
bent, torn, worn or broken parts. Use only those parts and accessories approved by us. To prevent
mould or mildew, do not fold or store the product if it is damp or wet. Allow it to dry thoroughly.
Always store the product in a well ventilated area and away from direct sunlight.
3.Unfold the legs after finishing assembling.
Ensure that the accessory tray holder frame is locked
correctly by pulling upwards and ensuring it does not lift.
Connect the shelf tube to the middle of the tray hole if
it's neccessary.