Costway BB5559 User manual

USER’S MANUAL
Baby Playpen Crib
BB5559/BB5576

Please read all instructions carefully and keep it for future reference.
General Warnings:
Attention: To prevent possible injury by entanglement, remove this toy when the child starts
trying to get up on its hands and knees in a crawling position.
Danger! Keep all small parts and packaging materials for this product away from babies and
children, otherwise they may pose a choking hazard.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all Packaging, separate and count all parts and hardware before Installation.
Please ensure that all parts are correctly installed, incorrect Installation can lead to a Danger.
We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, and place the product always on a flat, steady
and stable surface.
02

Manual Instruction
IMPORTANT: Read all instructions BEFORE assembly and USE of product, and KEEP THEM FOR
FUTURE USE.
1 WARNING
WARNING: Never leave the child unattended.
WARNING: Do not put the playpen near a fireplace or any other source of heat.
WARNING: Upper age /weight limit for children using the playpen: 3 years or 15kgs/33lbs.
WARNING: Do not use the playpen without the bottom being in place.
WARNING: Make sure the playpen is completely unfolded and all the locking system are fully secured
before putting your child into it.
2. RECOMMENDATIONS
RECOMMENDATION: Check that all assembly mechanisms are properly secured and regularly monitored.
RECOMMENDATION: To avoid injury, keep children well away when folding or unfolding the playpen..
RECOMMENDATION: Do not leave anything inside the playpen and do not place it alongside anything
that the child could climb onto or which could pose a risk of suffocation or strangulation, e.g. strings,
curtains ties, etc .
RECOMMENDATION: Do not move the playpen when the child is in it.
RECOMMENDATION: Do not use if one or more items are broken or missing.
RECOMMENDATION: Use only accessories or spare parts that have been approved by the
manufacturer.
RECOMMENDATION: Make sure that your child cannot climb out of the playpen. To avoid the risk of
falls, stop using the playpen as soon as the child is able to climb out of it.
LIST OF PARTS
Check that no parts are missing before setting up the playpen.
A. 1 playpen
B. 1 carrying bag
C. 1 foldable mattress
3. ASSEMBLY INSTRUCTIONS
STEP 1: OPENING OF THE PACK
Open the carrying bag (Fig.1) and take the
playpen out. Detach the foldable mattress from
the playpen by unfastening the self-fastening
straps (Fig. 2) to release the playpen.
A.playpen B. carrying bag C. foldable mattress
1 2
D. 1 diaper changer
E. 1
F. 1 second level
toy bar
D. diaper changer E. toy bar F. second level
03

STEP 2: SECURING THE PLAYPEN
a.Unfold the structure slightly to push the sides
of the playpen apart (Fig. 3).
IMPORTANT
Start by unfolding the playpen by pushing the sides apart. The bottom of the playpen( in the
centre) should be lowered last.
b.Follow the instructions illustrated Fig.4a and Fig.4b on both sides at the same time.
3
c.Finish by banging down on the bottom of the
playpen( Fig .5) to secure the blocking mecha-
nism.
5
SIDE A
(with opening)
SIDE A
(with opening)
4a 4b
« CLICK
04

STEP 4: Install the bassinet
STEP 3: INSTALLATION OF SAFETY BUCKLE FOR SECOND LEVEL
Before installing, remove the foldable mattress from the bottom of playard, place bassinet in side of the
playard and attach the 12 clips to the top rails (fig.6/fig.6-1/fig.6-2).
66-1 6-2
7-1 7-2
7-3
a.Insert the metal tube together in the bottom of the playard as shown, MAKE SURE tubes are
connected before installing the foldable mattress (fig.7-1/fig.7-2).
b.Slip the foldable mattress into the bottom of the playpen(fig.7-3).
05

STEP 5: SECURE THE DIAPER CHANGER IN PLACE ON THE HANDRAIL
8
9
10 10-1
9-1
b.Fasten the toy clip to the armrest (fig.9/fig.9-1）
4. FOLDING AND STORING THE PRODUCT
STEP 1: FOLDING THE PLAYPEN
a.Remove the mattress from the playpen (Fig. 10) and lift up the bottom with the help of the fabric
pulling strap (Fig.10-1).
06
a.Fasten the diaper changer clip to the armrest （fig.8）

b. Lift up rims A simultaneously while pressing the unlocking button underneath the rim( Fig.11).
c. Lift up rims B simultaneously while pressing the unlocking button underneath the rim( Fig.12)
Each rim should buckle on both sides, as shown here(Fig. 13 and Fig.14).
.12
.13 .14
.11
IMPORTANT
If the rims of the playpen do not fold down completely, repeat the procedure shown in Fig.11
STEP 2: STORING THE PLAYPEN
Once the playpen locking mechanisms have been released, fold it up completely and fit the mattress
around the structure, securing it with the self-fastening straps( Fig.15), Slip the whole thing into the
carrying bag (Fig. 16).
and Fig.12
.14 .15
MAINTENANCE INSTRUCTIONS
You can extend the life of your playpen by taking good care of it, here is some advice.
1 - Never immerse the playpen,just wipe down the different surfaces.
2 - Clean with a sponge and soap or a gentle detergent. Air-dry, preferably away from sunlight.
3 - Always store this product in a well-aired place.
4 - Do not expose to sunlight for long periods of time.
07

08