www.costway.com
Specifications
IMPORTANT SAFETY INFORMATION
Rating 1625W/AC120V /60Hz
Cord 14AWG
Installation Precautions
1.Install only according to the instructions.Improper Installation can create hazards.
2.Wear ANSI-approved safety goggles and heavy-duty work gloves during installation.
3.Keep Installation area clean and well lit.
4.Keep bystander out of the area during installation.
5.Do not install when tired or when under the influence of alcohol, drugs or medication.
6.Install the Cord Reel properly before connecting to The power supply.
7.If mounted in an area that is not readily accessible, Connect this Cord Reel to a switch-controlled
outlet;
8.Install out of reach of Children.
9.Verify that installation surface has no hidden utility Lines before drilling or driving screws.
Use precautions
1. This product is not a toy. Do not allow
children to play with or wear or near this item.
2. Wear ansi-approved safety goggles and
heavy-duty work gloves during use.
3. Use as intended only.
4. Inspect before every use; do not use if parts
are loose or damaged or if insulation is worn.
5.Maintain products labels and nameplates.
These carry important safety information. If
unreadable or missing, contact us for a
replacement.
6.Plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter
plugs. Unmodified plugs and matching outlets
will reduce risk of electric shock.
7.Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
8.When pulling cord from the cord reel, grasp
the reel’s cord itself, and not the device or tool
the cord is plug into.
9.Do not expose reels to rain or wet
conditions. Water entering a reel will increase
the risk of electric shock.If operating a reel in
a damp locations is unavoidable,use a ground
fault circuit interrupter (gfci) protected supply.
Use of gfci reduce the risk of electric shock.
10.Check with a qualified electrician if you are
in doubt as to whether the outlet is properly
grounded. If the plug will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
1.The plug must be connected to a properly
grounded outlet. If the reel should electrically
malfunction or break down, grounding
provides a low resistance path to carry
electricity away from the user, reducing the
risk of electric shock.
2.The grounding prong in the plug is connected
through the green wire inside the cord to the
grounding system in the reel. The green wire in
the cord must be the only wire connected to the
reel’s grounding system and must never be
attached to an electrically “live” terminal.
3.The reel must be plugged into an appropriate
outlet, properly installed and grounded in
accordance with all codes and ordinances.
4.Do not attach an extension cord to this item’s
nput cord.
5.Do not open reel spring mechanism.Spring
may eject forcefully if housing is opened.
04
