Costway EP24891US User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Ceramic Hot Plate
EP24891US

Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
www.costway.com www.costway.com
OPERATION INSTRUCTION
CERAMIC HOT PLATE
IMPORTANT SAFEGUARDS
Thank you for your purchase of our electric hot plates. To use this hot plate proper-
ly and safely, please read the following instructions carefully. There will be some
smoke and smell when first used, this is normal, please don't be afraid.
When using electrical appliance, basic safety precautions should always be
followed including the following:
1.Read all instructions.
2.Do not touch hot surfaces. Use handle or knobs.
3.To protect against electric shock do not immerse cord, plugs, or the whole
unit in water or other liquid.
4.Close supervision is necessary when any appliance is used by or near
children.
5.Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts.
6.Do not operate any appliance with a damaged cord or plug or after the
appliance malfunction or has been damaged in any manner. Return appliance
to the nearest authorized service facility for examination, repair, or adjust-
ment.
7.The use of accessory attachments not recommended by the appliance manu-
facturer may cause injuries.
02 03

www.costway.com www.costway.com
8.Do not use outdoors.
9.Do not let cord hang over edge or table or counter, or touch hot surfaces.
10.Do not place on or near a hot gas or electric burner, or in a heated oven.
11.Extreme caution must be used when moving an appliance containing hot oil
or other hot liquids.
12.Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to “off”, then remove plug from wall outlet.
13.Do not use appliance for other than intended use.
14.CORRECT USE OF ELECTRICITY
a)Use of an extension cord is not recommended as it may overheat and cause risk
of fire. However, if an extension cord is used, the marked electrical rating of the
extension cord should be at least as great as the electrical rating of the appliance,
and the long cord should be arranged so that it will not drape over the countertop
or tabletop where it can be pulled on by children or tripped over.
b)To prevent overloading and blowing fuses, ensure that no other high power appli-
ance is plugged into the same socket, or another socket which is connected in the
same circuit.
c)DO NOT PUT the cord under the carpet, blankets. Always keep the power cable
away from walkway in room.
d)DO NOT TRY TO REPAIR the broken fuse by yourself, the user should take the
set to your local authorized maintenance center to replace it with the new one.
e)The appliance is indoor use only.
f)This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
g)Children should be supervised to ensure that they do not play with the appliance.
h)The surfaces are liable to get hot during use
i)Appliances are not intended to be operated by means of an external timer or
separate remote-control system
j)When the appliance is not in use and before cleaning, unplug the appliance from
the outlet.
k)WARNING: If the surface is cracked, switch off the appliance to avoid the possi-
bility of electric shock.
l)The outer surface may get hot when the appliance is operating.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
15.SAFETY IN OPERATION
a)DO NOT OPERATE this hot plate near water sources or flammable liquids.
b)DO NOT OPERATE this hot plate on or near any hot surface. (Hot plate,
electric stoves etc).
c)Always operate this from an earthed domestic 120V~60Hz power socket.
d)Ensure the hot plate is placed on a stable, secure surface to eliminate the possibil-
ity of tipping over or avoid any water in the appliance.
e)Never try to touch the hot surface of this hot plate before it is cooled down.
PREPARATION BEFORE USE
1.Clean the hot plate with a soft damp cloth. Place your hot plate on the level and
stable surface near the electrical socket.
2.Check that the voltage marked on the product corresponds with your supply
voltage. Ensure the controller is in the “OFF” position before plugging in.
3.Always use flat bottom saucepans or containers that make close contact with the
heating element. Ideally, the saucepans or containers should be 180～200mm (
7”-8”) in diameter. Keep the surface of the heating element clean and dry.
4. Close supervision is extremely necessary when this hot plate is used by or near
children or invalids. Never operate this hot plate unattended.
5. If there is smoke for the first use, that is normal. To make the unit heat without
any pot about 10 Minutes before cooking.
OPERATION
1.Put water and/or food in the container (The total amount of water and /or food
should not exceed 80% of the container to avoid overflowing), put a lid on the
container and place it on the hot plate.
2.Connecting to the power supply socket. Turn the switch from “OFF” TO “MAX”
position and the indicator light is on for working, the hot plate is in a state of
heating.
3.Two points to be reminded by the user when using the new hot plate:
a)When using this hot plate for the first time, there may be a smell of smoke
coming from the surface of the heating element. This is normal because of the
invisible protective coating in production.
b)Before the water is boiling, the indicator light on the hot plate may be temporary
off due to the temporary disconnection of the thermostatic control. This is a safety
issue for the working on the hot plate.
4.When you have finished using the hot plate, turn the switch to “OFF” position
and unplug it from the socket. Wait until the appliance is completely cooled down
before moving or cleaning.
04 05

www.costway.com www.costway.com
MAINTENANCE & CARE
1.Make sure the plug is removed from the power supply socket. After the hot plate
set is completely cooled down, clean it with the mild cleaner or gel-like cleaner by
using soft cloth.
PLEASE DO NOT CLEAN THE SET WHEN IT IS STILL HOT.
2.DO NOT USE hard brushes, scratchy materials and/or alcohol, petrol or any
organic cleaner for the cleaning purpose.
3.Except the removable frying pan, do not immerse the main body in water to
clean.
4.Put the hot plate on the cool place right after the cleaning.
Guarantee
The device supplied by our Company is covered by a 12 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *) ascrib-
able to material or manufacturing defects will be eliminated free of charge by
repairing or, at our discretion, by replacing it. The guarantee services do not entail
an extension of the life of the guarantee nor do they give rise to any right to a new
guarantee!
Proof of the guarantee is provided by the proof of purchase. Without proof of
purchase no free replacement or repair will be carried out.
If you wish to make a claim under the guarantee please return the entire machine in
the original packaging to your dealer together with the receipt.
*) Damage to accessories does not mean automatic free replacement of the whole
machine. In such cases please contact our hotline. Broken glass or breakage of
plastic parts are always subject to a charge.
Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading
blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said parts are not covered by
the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
Appliances are not intended to be operated by means of an external timer or
separate remote-control system.
The temperature of accessible surfaces may be high when the appliance is operat-
ing.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
SPECIFICATION
ES-3202C
Power supply
Correct Disposal of this product
120V~ 60Hz
Power 900W+900W
This marking indicates that this product should not be
disposed of with other household waste. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To
return your used device, please use the return and
collection systems or contact the retailer where the
product was purchased. They can take this product for
environmental safe recycling.
06 07

Welcome to visit our website and purchase our quality products!
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
www.costway.com
08