Costway SE57K-20B00 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us!
Do NOT return this item.
Freestanding Electric Fireplace
SE57K-20B00/FP10058GB-BK
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg
FR office: Saint Vigor d'Ymonville PL office: Gdańsk
US:[e-mail]
UK:[e-mail]
AU:[email protected]

Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled
near to the area in which they will be placed in use, to avoid
moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product
away from babies and children as they potentially pose a serious
choking hazard.
READ ALL INSTRUCTIONS BEFORE USE AND
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions before
using this heater.
2. Do not use this heater
outdoors.
3. This heater is not intended for
use in bathrooms, laundry areas
and similar indoor locations.
Never locate the heater where it
may fall into a bathtub or other
water container.
4. Do not run the power cord
under carpeting.
Do not cover the power cord with
throw rugs, runners, or the like.
Arrange the power cord away
from traffic areas and where it
will not be tripped over.
5. To disconnect the heater, turn
controls to off, then remove the
plug from the outlet.
6. Connect to properly grounded
outlet only. Always plug heaters
directly into a wall
outlet/receptacle. Never use with
an extension cord or reloadable
power tap (outlet/power strip).
7. To prevent a possible fire, do
not block operate the firebox on
soft surfaces, like a bed, where
openings may become blocked.
8. Use the heater only as
described in the manual. Any
other use not recommended by
the manufacturer may cause
fire, electrical shock, or injury to
persons.
02 03
CAUTION! WARNING: Do not use this
device before reading these instructions.

04 05
WARNING: Extreme caution
is necessary when any heater is
used by or near children or
invalids and whenever the heater
is left operating and unattended.
WARNING: Always unplug
the heater when not in use.
WARNING: Do not operate
any heater with a damaged cord
or plug or after the heater
malfunctions, has been dropped,
or damaged in any manner. Ask a
qualified technician for
examination, electrical or
mechanical adjustment or repair.
WARNING: Do not insert or
allow foreign objects to enter any
ventiliation or exhaust openings
as this may cause an electric
shock or fire, or damage to the
heater.
WARNING: A heater has hot
and arching or sparking parts
inside. Do not use in areas where
gasoline, paint, or flammable
liquids are used or stored.
WARNING Manufacturer
and seller expressly disclaim any
and all liability for personal
injury, property damage or loss,
whether direct, indirect, or
incidental, resulting from the
incorrect attachment, improper
use,inadequate maintenance,
unapproved modification, or
neglect of this product.
WARNING: There is no user
serviceable parts inside
fireplace/heater. If the unit
appears to malfunction, turn the
unit off and unplug from the wall
immediately and contact
Customer Service.
WARNING: This heater is
hot when in use.
To avoid burns, do not let bare
skin touch hot surfaces. If
provided, use handles when
moving this heater. Keep
combustible material, such as
furniture, pillows, bedding,
papers, clothes, and curtains at
least 3ft (0.9m) from the front of
the heater and keep them away
from the side or rear.
Specifications
Model Number
Dimensions (Wx DxH)
Net Weight
Gross Weight
Power Rating
Voltage
Frequency
SE57K-20B00/FP10058GB-BK
50.8x27.9x58.4 cm
8 kg
10 kg
1800-2000 W
220-240V
50 Hz
Always supervise small children
around the fireplace/heater. Do
not place any cloth or
decorations over the heater
outlet or fireplace, or otherwise
obstruct the heater outlet of the
fireplace, as this may cause a fire
and serious injury.
CAUTION: While the heater
is in use, the top center of the
fireplace can get hot to the
touch, and may cause serious
injury or burns.

06 07
Package Contents
Installation Guide
Assembly Instruction
Placing the Unit
Place the unit on smooth level surface.
Keep combustible objects at least 0.9m away from the unit.
Place the unit to a location that is accessible to grounded power
socket.
NOTE:
This unit is intended for indoor use only.
Do not push, pull, or drag the unit to prevent damage to the legs or
the unit.
1. Take out the unit from the box and layout all the spare parts for
easy assembly. Make sure all small items are not left in the
packaging materials.
2. Lay the unit upside down.
3. Attach the leg to the unit by aligning the tabs on the leg to the slot
on the unit.
4. Secure the leg on the unit by tightening 3 screws into the
pre-drilled hole.
5. Repeat the above steps for the remaining legs.
Screw x12
Leg x4
x12

08 09
Installation Guide User Instruction
This product is equipped with a British standard plug, as shown in
following figure.This heater is for use on 220volts.
This unit comes standard with a 6ft (1.8m) long, three wired cord.
Always plug the unit into a wall outlet. An extension or relocate tab
should never be used.
CAUTION! WARNING: DO NOT modify the plug provided with
the product if it does not fit the outlet.
Have a proper outlet installed by a qualified electrician.
Before use
Check that the air intake and exhaust is not covered or obstructed in
anyway.
Plug the unit to a grounded power socket.

10 11
Power ON /OFF
Flip the power switch to "ON" position to power on the unit.
Flip the power switch to "OFF" position to power off the unit.
CAUTION! WARNING: DO NOT unplug the unit when it is still
"ON"
Heater
Toggle the Temperature switch to turn on the heater. Turn the
temperature knob to select the desired temperature.
Flame Effect
The flame effect will be visible through the front window after turning
the power switch to "ON" position.
Temperature Limiting Feature
This unit will automatically shut off if the heater reaches an unsafe
temperature. To reset, Toggle the power switch to "off" position,
unplug the socket and wait for at least 5 minutes before plugging the
unit to a grounded power outlet and turning on the unit.
Care & Maintenance
Cleaning the unit:
Always turn off the heater and unplug the unit from power outlet
before cleaning.
Use a vacuum cleaner or duster to remove dust and dirt from the
heater and vent areas.
Use a damp soft cloth to clean the surface and buff with a dry cloth.
Do not use abrasive cleansers, liquid sprays or any cleaner that could
scratch the surface.