Costway FP10103 User manual

INSERT FIREPLACE HEATER
FP10103
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
Before You Start
02

13
13
12
11
10
9
8
7
6
5
4
3
2
1
03

PART IDENTIFICATION:
2
3
4
5
6
7
8
9
10
11
12
13
1
CODE
TOP Panel
Front Up Panel
Front Base Panel
Back Base Panel
Left Side Panel
Right Side Panel
Left Front Panel
Right Front Panel
Left Trim Panel
Right Trim Panel
Left Foot Panel
Right Foot Panel
Bottom Support Panel
1
QTY
Description
1
1
1
1
1
1
1
1
1
1
1
1
04

CODE PICTURE DESCRIPTION QTY
B Plastic Connector 8
C Metal Dowel 10
D Metal Cam 10
E Wood Dowel 26
F Screw 19
G Metal Connector 2
H Plastic Cap 10
Bolt 16A
Fall Prevention HarewareI 2
Assembly Tools Required
Hardware Parts List：
OR OR
Hand Drill Hex Key
(Included in the package)
05

13
13
13
13
6
5
4
4
A
B
A
B
8
A
A
2
8
06

12
11
10
9
8
7
6
54
3
A 2
E 4
10
E
A
F
F
07

2
8
9
7
10
12
11
10
9
8
7
3
2
E 4
E
E
8
C 6
C
E
08

10
9
8
6
2
3
5
4
3
2
F
F
2
A
B
C
A
D
E
H
A 4
D 6
E 4
H 6
09

2
1
G
G
2
C
C
4
10

A
B
C
6
5
2
1
D
D
4
E
E
6
F
F
7
H
H
4
11

MADE IN CHINA
FIREPLACE INSTALLATION
if you decide to install the fireplace into the mantel, carefully set the unit
from the back of the mantel and center it in the opening.
Check the alignment and attach the unit to the mantel by inserting screws
through the drilled holes on the trim to the mantel.
NOTE:Do not attempt to install the unit from the front of the mantel. It
will not fit.
12

Prevent Toppling
Secure the fireplace to the wall with the attached hardware to prevent
it from toppling.
I2
I
13

18”Insert Fireplace Heater
14

When using electrical appliances, basic safety precautions should
always be followed including the following:
READ ALL INSTRUCTIONS BEFORE USE
1. Read all instructions before using this heater.
2. Do not use this heater outdoors.
3. This heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. Never locate the heater where it may fall into a
bathtub or other water container.
4. Do not run the power cord under carpeting. Do not cover the power
cord with throw rugs, runners, or the like. Arrange the power cord away
from traffic areas and where it will not be tripped over.
5. To disconnect the heater，turn controls to off then remove the plug
from the outlet.
6. Connect to properly grounded outlet only. Always plug the heater
directly into a wall outlet/receptacle. Never use with an extension cord
or reloadable power tap (outlet/power strip).
7. To prevent a possible fire, do not block operate the firebox on soft
surfaces, bed, where openings may become blocked.
8. There is a thermostat limiter inside the heater. When the inner
temperature overheat or abnormal heating occurs, the thermostat
protective device cuts off the power supply to avoid fireplace from
damage or risk of fire
9. Use the heater only as described in the manual. Any other use not
recommended by the manufacturer may cause fire, electrical shock, or
injury.
15

WARNING: There is no user serviceable parts inside fireplace/heater.
If the unit appears to malfunction, turn the unit off and unplug from
the wall immediateky and contact Customer Service.
WARNING: This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles when moving
the heater. Keep combustible material, such as furniture, pillows,
bedding, papers, clothes, and curtains at least 3ft (0.9m) from the
front of the heater and keep them away from the side or rear.
WARNING: Extreme caution is necessary when any heater is used by
or near children or invalids and whenever the heater is left operating
and unattended.
WARNING: Always unplug the heater when not in use.
WARNING: Do not operate any heater with a damaged cord or plug
or after the heater malfunctions, has been dropped, or damaged in
any manner. Ask a qualified technician for examination, electrical or
mechanical adjustment or repair.
WARNING: Do not insert or allow foreign objects to enter any
ventiliation or exhaust openings as this may cause an electric shock or
fire or damage to the heater.
WARNING: A heater has hot and arching or sparking parts inside. Do
not use in areas where gasoline, paint, or flammable liquids are used
or stored
CAUTION: While the heater is in use, the top center of the fireplace
can get hot to the touch, and may cause serious injury or burns.
Always supervise small children around the fireplace/heater.Do not
place any cloth or decorations over the heater outlet or fireplace, or
otherwise obstruct the heater outlet of the fireplace.as this may cause
a fire and serious injury.
16

Voltage
TECHNICAL SPECIFICATION
PACKAGE CONTENT
Remote Control
Fireplace UnitSideTrim (L/R)TopTrim
Screw x18
Model Number
Dimensions (W x D x H)
Power Rating
FP10103
18” x 5.04 ” x 17.1”
1400 W
120 V
Frequency 60 Hz
17

ASSEMBLY INSTRUCTION
Estimated Time for Assembly
20:00mins
STEP 1
CAUTION
Take out the unit from the box and layout all the spare parts for easy
assembly. Make sure all small items are not left in packaging materials.
This unit has a glass front panel. Use extreme caution when handling
glass to prevent personal injury or damage.
18

STEP 2
STEP 3
Attach the top trim to the top of the unit and secure it by tightening 2
screws. Make sure the right angle side faces toward the front of the unit.
Align and attach two side trims to the sides of the fireplace unit. Identify
the right and the left and make sure that the right angle side faces toward
the front of the unit.
Carefully set the unit from the back of the mantel and center it in the open-
ing.
Check the alignment and attach the unit to the mantel by inserting screws
through the drilled holes on the trim to the mantel.
NOTE: Do not attempt to install the unit from the front of the mantel. It
will not fit.
待替换
19

USER INSTRUCTION
Before use
Check that the air intake and exhaust is not covered or obstructed in
anyway. Keep combustible objects at least 3ft away from the unit.
Plug the unit to a grounded power socket.
Grounding
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock.
This unit comes standard with a 6ft (1.8m) long, three wired cord. Always
plug the unit into a wall outlet. An extension or relocate tab should never
be used.
CAUTION / WARNING
• Improper connection of the equipment grounding conductor
can result in a risk of electric shock.Check with a qualified
electrician or serviceman if you are in doubt as to whether the
product is properly grounded.
• DO NOT modify the plug provided with the product nor using
any bypass device if the plug does not fit the outlet. Have a
proper outlet installed by a qualified electrician.
20