Costway HW68449 User manual

PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USER’S MANUAL
6-Piece Rattan Sofa Set
HW68449
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
ASSEMBLED BY 2 ADULTS

Hardware inside
Contact our friendly customer service department for help first.
Read each step carefully before starting. It is very important to
ensure each step followed in correct order, otherwise assembly
difficulties may occur.
Most of board parts are labeled or stamped on the raw edges.
Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to where
the unit will be used.
Keep the hand tools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the parts.

3
Notice:
1. 50% Tighten before fixing all screws, Allen wrench is recommended instead
of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all
the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground
and tighten up all screws again.
6. Note : If one or some screws are fully tightened during assembly, chances are
the others will not be aligned with holes. In addition, all the holes are designed
to be relatively larger to provide more space for the adjustment of the screws.
A
N
P
O
Q
I
K
J
J
K
L
B
C
D
C
F
C
E
GH
M
(2 x Armless sofa) (3 x Corner sofa)
(1 x Table)

Part List
Back Frame (2pcs)
A B
Seat Frame (2pcs)
C
D
Front Frame (2pcs)
Side Frame (7pcs)
Big Corner Frame (3pcs)
E F
Small Corner Frame (3pcs)
G
Corner Seat Frame (3pcs)
H
Corner front Frame (3pcs) Table top Frame (1pc)
I
Long side Table (2pcs)
J K
M N O
Small corner Pillow (3pcs)
Big corner Pillow (3pcs)
P Q
Table Glass (1pc)
4
L
Seat Cushion (2pcs)
Corner seat Cushion (3pcs) Back Pillow (2pcs)
Short side Table (2pcs)

Hardware List
Plastic feet (24pcs)
5
1
5
2
Bolt M6 x 30 mm (72 pcs)
3
M6x1 Washers (72 pcs)
4
Allen key M4 (2 pcs)
Bolt M6 x 25 mm (48 pcs)

STEP 1 STEP 2
Connect Back Frame (A) & Seat Frame (B)
with Bolt (1) & Washers (3)
6
Connect Part from STEP 1 & Side Frame (C)
with Bolt (1) & Washers (3)
STEP 3
Connect Part from STEP 2 & Front Frame (D)
with Bolt (1) & Washers (3)
STEP 4
Connect Part from STEP 3 & Plastic feet (4)
with Bolt (2)
B
A
1
1
1
1
1
1
CC
1
1
1
1
D
2
4
(2 x Armless sofa assembly)

7
STEP 5
Put on Seat Cushion (L) & Back Pillow (N)
to complete Chair
N
L
STEP 6
Connect Small Corner Frame (F) & Corner Seat
Frame (G) with Bolt (1) & Washers (3)
F
G
1
1
STEP 7
Connect Part from STEP 6 & Big corner Frame
(E) with Bolt (1) & Washers (3)
1
1
1
E
STEP 8
Connect Part from STEP 7 & Side Frame (C)
with Bolt (1) & Washers (3)
1
1
C
(3 x Corner sofa assembly)

8
STEP 9
Connect Part from STEP 8 & Corner front
Frame (H) with Bolt (1) & Washers (3)
1
1
1
H
STEP 10
Connect Part from STEP 9 & Plastic feet (4)
with Bolt (2) 2
4
STEP 11
Put on Corner Seat Cushion (M) & Big Corner
Pillow (P) & Small Corner Pillow (O) to
complete corner Chair
P
M
O
STEP 12
Connect Table top Frame (I) & Long side Table
(J) & Short side Table (K) with Bolt (1) &
Washers (3)
I
K
J
1
1
1
1
1
(1 x Table assembly)

9
STEP 14
Connect Part from STEP 13 & Plastic feet (4)
with Bolt (2)
STEP 13
Connect part from STEP 12 & Long side Table
(J) & Short side Table (K) with Bolt (1) &
Washers (3)
2
4
1
1
1
1
1
1 1
K
J
STEP 15
Put on Table Glass (Q) to complete Table
Q
FINISH
STEP 16
M
O
P
N
N
O
Q
L
M
P
L
M
PO

10