Costway HW70449 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
RATTAN SOFA SET 5PCS
HW70449
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:[e-mail]
UK:[e-mail]
AU:[email protected]
US office: Fontana UK office: Ipswich AU office: Truganina

03
Before You Start
02
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
H
G
D
A
C
B
L
N
M
L
(2 x Chairs)
(1 x Table)
(2 x Stools)
I
J
I
J
K
Notice
1. 50% Tighten before fixing all screws, Allen wrench is
recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it
remains stable.
3. Tighten up all screws with tools gradually.

04 05
4. If the screws are not aligned with holes during assembly, please
loosen all the other screws to 50% and continue the assembly
process.
5. If the item is not stable, please loosen all the screws, adjust it on
a flat ground and tighten up all screws again.
6. Note : If one or some screws are fully tightened during assembly,
chances are the others will not be aligned with holes. In addition, all
the holes are designed to be relatively larger to provide more space
for the adjustment of the screws.
Part List
x2I x2J x1K
x4L x2M x2N
Table Leg Frame Side Frame Wood Table Top
Stool Leg Frame Stool Seat Frame Stool Seat Cushion
x2A x2Cx2B
x2D x2G x2H
Right Frame Left Frame Seat Frame
Back Frame Seat Cushion Back Pillow
Hardware List
x41 x422 x43
x464 x25
Bolt M6x25 mm Bolt M6x35 mm Bolt M6x60 mm
Washers Ø6x16x1 mm Allen key M4

STEP 1
(2 x Chair assembly)
Connect Back Frame (D)
to Seat Frame (C) with
Bolt (2) & Washer (4)
STEP 3
Connect part from STEP 2 to
Right Frame (A) with Bolts (2) &
Washers (4)
STEP 2
Connect part from STEP 1
to Left Frame (B) with
Bolts (2) & Washers (4)
D
C
2
x2
B
2
2
2
2
x2 x2
2
2
2
2
A
0706

STEP 4
Connect the parts of the
Back Frame (D) to Right
Frame (A) and Left
Frame (B) completed in
STEP 3 with Bolts (3)
3
3
B
A
D
x2
H
G
x2
Adjustable
leg pads
STEP 5
Put on Seat Cushion (G)
& Back Pillow (H) to
complete the assembly
of Single chair I
K
J
1
2
1
2
2
2
STEP 6
(1 x Table assembly)
Connect Table Leg
Frame (I) & Side Frame
(J) & Wood Table Top
(K) with Bolts (1), (2) &
Washers (4)
0908

STEP 7
Connect part from
STEP 6 to Table
Leg Frame (I) with
Bolts (1), (2) &
Washers (4)
I
1
1
2
2
2
2
STEP 8
(2 x Stool assembly)
Connect Stool Leg Frame
(L) & Stool Seat Frame
(M) with Bolts (2) &
Washers (4)
M
L
2
2
2
2
x2
1110

STEP 9
Connect part from STEP 8
to Stool Leg Frame (L) with
Bolts (2) & Washers (4)
L
2
22
2
x2
STEP 10
Put on Stool Seat Cushion (N) to
complete the assembly of Stool
N
x2
1312

STEP 11
Combination and Arrangement
1514