Costway NP10539 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
Firewood Storage Rack
NP10539/NP10540
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk

02 03
DO NOT fully tighten the
bolts & Nuts until the log
rack is completely
assembled!
CAUTION:
Do not load storage rack until
fully assembled on a flat, level
surface. Your firewood should
be loaded and unloaded evenly
for proper weight distribution.
If the load is unbalanced, the
rack could tip over and cause
injury .
Keep this product clean by
using a damp cloth. Do not use
abrasive cleaners, as it will
cause parts to tarnish or rust.
INSTRUCTIONS:
1)Remove all contents from packaging. Make sure all of your
parts are present.
2)Align the holes in the end supports (A) with the holes in
the base supports (B).
3)Secure into place by threading a bolt (C) through the end
support (A) and the base support (B), the support rod (E).
Attach a nut (D) (Loosely) to the end of each bolt (C).
4)Repeat steps 2 & 3 for the other side of the log rack.
5)Align the holes from the base supports (In the middle of
the log rack) to each other
6)Secure the base supports together by threading a bolt (C)
through the two base supports. Attach a nut (D) (Loosely) to
the end of each bolt (C).
7)Repeat steps 5 & 6 for the other side of the log rack.
Tighten all bolt and nut connections. Your Firewood Storage
Rack is now ready for loading.
PARTS LIST
Part#
A
B
C
D
E
F
Description
End Supports
Base Supports
Bolts
Nuts
Support rod
Cover
QTY
2
4
14
14
3
1
(A)
(C)
(D)
(C)
(D)
(B)
(E)
(F)