Costway TY580400 User manual

TY580400
Foosball Table
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USA office: Fontana GBR office: Ipswich AUS office: Truganina
If you're having difficulty, our friendly
customer team is always here to help.
USA:[email protected]
AUS:[e-mail]
GBR:[e-mail]

Before You Start
WARNING:
CHOKING HAZARD
-Small parts.
Not for children under 3 years.
0-3
Please read all instructions carefully and keep it for future reference.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation can lead to a
danger.
We recommend that, where possible, all items are assembled near the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during installation, and place the product always on a flat,
steady and stable surface.
General Warnings
Attention: Children should use this product under the parental supervision.
Danger: Keep all small parts and packaging materials for this product away from babies
and children, otherwise they may pose a choking hazard.
Warning
1
Insert the ball box into the card slot, align the screw holes,
and then fix it with screws.
02 03

2
3
4
Align the hole of the scorer to
the end plate and then press the
scorer fasteners to secure it in place.
First align one side plate with the holes on the two end plates,
use screws to fix. Do not fully tighten until the last step is completed.
Align the sports field board
with the slot of the end plate
on both sides until it snaps
into the slots on the side board.
5
6
7
Load buffers at both ends of the player-teams.
Pass teams of the same uniform through the side plate holes at
an interval as shown in the figure.
Install teams of the same uniform in the remaining holes on the side
panels as shown in the figure.
04 05

In case a return is required, the item must be returned in original box. Without this
your return will not be accepted.
DO NOT discard the box / original packaging.
Take a photo of the box markings.
Take a photo of the damaged part (if applicable).
Send us an email with the images requested.
A photo of the markings (text) on the side of the box is required in case a part is
needed for replacement. This helps our staff identify your product number to
ensure you receive the correct parts.
A photo of the damage is always required to file a claim and get your replacement
or refund processed quickly. Please make sure you have the box even if it is
damaged.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.
Return / Damage Claim Instructions
8
9
10
Pass the other side plate through the holes of the four teams, align the side
plate screw holes with the holes on the end plates, and then lock the screws.
Install the handles and safety end caps at both ends of the teams,
as shown in the figure. After pressing in place, lock the handles with screws.
After confirming that the installation is correct,
tighten the screws to ensure that they are stable and durable.
06 07