Costway EP24507US User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Floor Lamp End Table
EP24507US / EP24508US

2
www.costway.com
3
www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
Please read this manual carefully before assembly. Check parts and components and make
sure they are correctly identified.
A cross wrench 1 PC
BPhillips head screw 4 PCS
Cdouble-headed screw
4PCS
D lamp bracket 1PC
E iron tube and lamp holder1PC
F tabletop panel1PC
Gupper stand 4PCS
H middle shelf panel1PC
I lower stand 4CS
Jbottom panel1PC
K decorative round head nut1PC
LVelcro magic 2PC
MEVA gasket 4PCS
N lampshade
1PC
Ohollow-carved designed side panel2PCS (The white one has no sid
e
panels)
Note: A soft cloth must be placed on the ground for the product before assembly, so as not to
scratch the panel surface and affect the appearance.

4
www.costway.com
5
www.costway.com
Aim at the hole position of the tabletop panel (F), assemble the upper stand (G), and put the
side panel (O) into it alongthe pull groove.
There is no side panel installation need of the white lampshade one
Connect the middle middle shelf panel (H) to the upper stand (G) with the double-headed
screw (C), then assemble the lower stand (I).

6
www.costway.com
7
www.costway.com
After assembling the iron tube, lock the lamp bracket to the lamp holder, and then lock the
lampshade to the lamp bracket with the decorative roundhead nut (K). Finally, fix wire to the
lower stand (I) with Velcro magic (L).
Ps: KD lampshade assembly parts KD lampshade assembly instructions.
The assembly is completed as shown in the picture on the left. Now it can be safely used. It is
recommended to use no more than 100W incandescent bulbs.
Do not sit or stand on the table top of the lamp
Place the gaskets in the sequence shown below,
and secure with buerflynut.
Then connect electronic master wires to each other
the white one lampshade design

8
Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com