covetrus ALRT GluCurve Installation and user guide

How to: Apply the GluCurve on a pet
•The pet owner will need to input the Calibration Code located on the applicator package to activate
•Activation takes 2-3 minutes and should be completed before sending the pet home
•The user manual and orange releaser clip inside the box are for the pet owner to keep
•When choosing a location, consider the individual pet and pet owner’s ability to ensure the CGM stays on.
•Consider the use of protective equipment such as clothing, harness, cone, etc.
Choose a location and shave a small 2 inch by 3 inch area using a 40 blade clipper
Wipe area with alcohol and allow time to dry, the CGM must be applied to dry skin
Remove protective lining from bottom of Applicator, avoid touching adhesive pad
Notes

How to: Apply the GluCurve on a pet
Slide orange safety lock to unlock position, ensure tab is all the way over
Firmly press Applicator against desired location, press button to deploy CGM
Insert protruding tab by the “G” in GluCurve first, then gently press the “e” side flat
Firmly press in each corner next to the hole containing a locking tab until you hear a click
It is critical that you hear two clicks, one for each tab locking in place

How to: Apply the GluCurve on a pet
Run fingers around adhesive pad pressing down to ensure it is firmly in place
More
information
Access the following resources for the GluCurve Pet CGM at www.GluCurve.Com/Help:
• How to: Apply the GluCurve on a Pet
• How to: Activate the GluCurve after applying
• How to: Troubleshoot the GluCurve
• How to: Use the Veterinary Web Portal
• How to: Use the GluCurve app for iOS and Android
• Help Videos
• FAQs and More
?