Cozee Paws 520862 User manual

NOTE: We recommend that you maintain an eective flea and parasite treatment
for your pet to avoid possible contamination of your Pet Bed product.
RECYCLING
At the end of its useful life or at any time in the future you need to dispose of this product
please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
Approvals
This product complies with all relevant EU Directives.
PLEASE READ AND RETAIN THESE
INSTRUCTIONS FOR FUTURE REFERENCE
Model No: 520862
Car Bolster &
Sofa Pet Bed
Imported by: QVC UK, W4 5XU
Manufactured By: Sourcing Boutique HK Ltd, 21st Floor, The Phoenix, 23 Luard Road,
Wan Chai, Hong Kong.
DO NOT TUMBLE DRY
ONLY the Removable Cover can be washed as needed at 40°C. To carry this out proceed
as follows:
Washing the Cover
1. Unzip the Main Bed, remove the three Filler Pads from areas 1-3 (see above). Leave
the Main Bed Cover unzipped. There is no Filler Pad in the Play / Edge Protector
Area.
2. Wash the Cover in the Machine 40°C. When completed it can be dried in the normal
way on a washing line or similar. DO NOT Tumble Dry.

Using your Pet Bed at Home
At Home: Both the front and back sections can be unrolled to provide a play area for
your pet or to provide a larger area to stretch out on, see below:
Using your Pet Bed in the Car
1. Attach the Pet Bed to the Car Seat by attaching the top of the Rear Seat Protector
(2) by the Head Restraint Strap. This has a Velcro adjuster to allow easy fitment and
adjustment.
2. Unclip the Play Area / Seat Protector (Edge) and fold it down over the edge of the Car
Seat. This is optional as the rolled up material will in itself offer some protection.
3. To keep your pet safe and prevent unwanted and distracting movement in the car we
strongly recommend you secure your pet. There are a number of ways of doing this,
see below for images of typical examples:
Both Leads that connect to the Seat Belt socket and Dog Harnesses etc. are readily
available should this be your choice.
Caring for your Pet Bed
Regularly air your Pet Bed, ideally it should be taken outside, shaken and then hung on
a washing line or similar for a few hours when weather permits.
The Main Bed has a Removable Cover, see below:
Congratulations on the purchase of this versatile Pet Bed. The Bed can be used both in
your home and in the car providing protection for seats and furniture wherever you are.
The Bed has a non-slip base and removable covers on both the Cushion and the Main Bed.
Manufactured from 100% Polyester (Non-slip pads PVC).
This Pet Bed is constructed from 100% Polyester so there is no toxic risk should your
dog chew his bed. However, you should be aware of the risk of a blockage in the intestine
if too much is ingested.
When you have finished
using the Play Area simply
roll it up and refasten the
Press Studs.
Welcome
Using your Car Bolster Sofa Pet Bed
General Advice
Location of press studs Play areas extended
1 2
3 321
1. Head Restraint Strap
2. Seat Protector (Rear)
3. Bed with Bolsters
4. Play Area / Seat
Protector (Edge)
Overview