CPR Guardian III Assembly instructions

1CPRGUARDIAN.COMCPR GUARDIAN III
Advanced User Guide
THE QUEEN’S AWARD
FOR ENTERPRISE:
INTERNATIONAL TRADE
2018/2020

2CPRGUARDIAN.COMCPR GUARDIAN III
The CPR Guardian III
The CPR Guardian is designed to keep the wearer safe,
independent and active at all times with a built-in
emergency assist button, a heart rate monitor, mobile
phone and GPS tracking.
The GUARDIAN III provides you and your loved ones with
peace of mind and reassurance knowing you can always
be there for them whenever they need you.
SOS ButtonFall Detection GPS Locator
HR Monitor Phone Calls Temperature

3CPRGUARDIAN.COMCPR GUARDIAN III
Introduction
1.1 Getting To Know Your GuardianIII
Accessing The SIM Portal
SIM Details
Use the SIM number and PIN printed on the SIM Information Card to
access the CPR SIM portal. If your sim number in not on the sim card
holder please check under the CPR Guardian watch box.
Box Contents
Step 1
To manage your SIM,please visit:
https://www.cprguardian.com/simlogin
Step 2
Sign intotheportal using your SIM number
starting with‘44’ followed by the PIN Code.
Step 3
When you login, sign up as a new user andthen
selectyour SIM plan.
• 1X Guardian III Watch Phone
•1X USB Cable
• 1X SIM card (already inside the watch)
•1X SIM Information Card
•1X Quick Start Guide
Battery Care & Charging
To protect and optimize your battery performance. We
recommend you charge the watch for at least 12 Hours for
the 1st charge and over 8 Hours for the 2nd and 3rd charge.
Always use the USB cable provided and a CE approved USB
charger plug to avoid irreparable damage. v
Please align the magnetic charging cable connectorto the 4
pin metal contacts on the watchbackplate, and make sure it
is properly connected (the magnetic charging cable will not
charge if it’s reversed). Whenthe watch starts to charge,the
chargingicon will appear on the watchdisplay screen.

Introduction
1.1 Getting To Know Your Guardian
Signal Bars
Time
Battery
Power On/Off
Button
Microphone
Date
SOS Button
Speaker
Last
Recorded
Heart Rate
Steps
Temperature sensor
Heart Rate sensor
Charging Port
4CPRGUARDIAN.COMCPR GUARDIAN III

5CPRGUARDIAN.COMCPR GUARDIAN III
Set Up & Getting Started
1.2 Syncing Your Watch With The App
2
Once the app has downloaded,
you need to allow notifications
by pressing ‘Ok’
1
Download the CPR Monitoring
App from the App Store /
Google Play store
3
Next, familiarise yourself with
the app’s functions by
swiping right through
the app summary

6CPRGUARDIAN.COMCPR GUARDIAN III
4
Once the login page is
reached, proceed by
selecting ‘New User’
5
Choose your country code and
6
Enter the Verification code
Then Create a Password and
click registration
Set Up & Getting Started
1.2 Syncing Your Watch With The App

7CPRGUARDIAN.COMCPR GUARDIAN III
Set Up & Getting Started
1.2 Syncing Your Watch With The App
10
After creating your password,
you can proceed to login
11
Proceed by pressing
‘Add Device’
12
Then select
‘scan device QR code ‘

8CPRGUARDIAN.COMCPR GUARDIAN III
Set Up & Getting Started
1.2 Syncing Your Watch With The App
13
To reveal your watch’s QR Code,
swipe up on the watch face.
14
Once scanned proceed by
adding your relationship
to the wearer
15
Enter the watch user’s details,
ensuring that the watch SIM
number begins with ‘0’
Note: It can take up to 10 minutes for the QR code
number to display after the watch has been turned on

9CPRGUARDIAN.COMCPR GUARDIAN III
Set Up & Getting Started
1.2 Syncing Your Watch With The App
17
Once watch has been added
press [ ] for the watch to update,
this can take up to 5 minutes
16
Once you’re done, press back
button to save your details

10 CPRGUARDIAN.COMCPR GUARDIAN III
1
Press the [ ] icon on home
screen of the app
2
Next, select ‘Add Contact’
from the Command List
3
Continue to fill out the fields
suchas name, number and
then press ‘Save’
Using The Guardian App
2.1 Add Contacts

11 CPRGUARDIAN.COMCPR GUARDIAN III
Using The Guardian App
2.2 Call The Watch
1
To call the watch, go to the home
screen and then press the [ ]
icon to call the watch
2
You may be prompted to
press ‘Call’ before the call
can begin

12 CPRGUARDIAN.COMCPR GUARDIAN III
1
To measure wearer’s heart rate,
select the ‘Heart Rate’ section at
the bottom of the homescreen
2
After pressing ‘Measure Now’ it will
take up to 5 minutes for heart rate
readings to display on the app.
Using The Guardian App
2.3 Measure The Wearer’s Heart Rate

13 CPRGUARDIAN.COMCPR GUARDIAN III
1
To locate the wearer, begin by
pressing the icon [ ] on the
app home screen
2
In real-time the app will locate
the wearer’s location
Using The Guardian App
2.4 Locate The Wearer

14 CPRGUARDIAN.COMCPR GUARDIAN III
Using The Guardian App
2.5 Set Pedometer Goals
1
Begin by pressing the icon [ ] on
the app homescreen
2
Select Pedometer Goals from
the features list
3
Enter the amount of steps you
would like to reach daily

15 CPRGUARDIAN.COMCPR GUARDIAN III
3
Next, scan the device QR
Code to add the new device
Using The Guardian App
2.6 Add Another Watch To The App
1
Begin by pressing ‘Switch Device’
on the home screen
2
Next, press the [ ] icon located
at the bottom of the screen

16 CPRGUARDIAN.COMCPR GUARDIAN III
Using The Guardian App
2.6 Unpair The Watch From The App
1
Begin by pressing ‘Switch Device’
on the home screen
2
Next, press ‘Unpair’ to remove
the watch from the app

17 CPRGUARDIAN.COMCPR GUARDIAN III
123
Fall Detection

18 CPRGUARDIAN.COMCPR GUARDIAN III
1
Begin by pressing the icon [ ] on
the app homescreen
2
Select Geo-Fence from the
features list
Geo - Fence

Geo - Fence
19 CPRGUARDIAN.COMCPR GUARDIAN III
4
3
Then select “ Add ”
Select and name your geo-fence,
once done press confirm

Auto to Manual
20 CPRGUARDIAN.COMCPR GUARDIAN III
1
Begin by pressing the icon [ ] on
the app homescreen
23
Once you have selected your
preferred mode press save