Craftsman CMXWDCR75095 User manual

final page size: 8.5 x 5.5 in CRAFTSMAN
LED Digital Clock
CMXWDCR75095M
CMXWDCR75095
INSTRUCTION MANUAL
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
1-888-331-4569 WWW.CRAFTSMAN.COM

Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.
WARNING: GENERAL SAFETY
• Do not immerse device in water. This can cause electrical shock and damage the product.
• Intended for indoor use only.
• Do not disassemble device or tamper with internal components. Damage caused by disassembly is not covered
by the warranty. No user-serviceable parts are inside these devices.
• Avoid dropping device; this may damage internal components.
• Keep all parts and batteries out of the reach of children.
WARNING: BATTERY SAFETY AND DISPOSAL BATTERY SAFETY
Read all safety warnings and all instructions before operating devices.
Compare the illustrations with the devices to familiarize yourself with the supplied components and setup instructions.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
WARNING: MAINTENANCE AND CARE
• Clean device with a soft, damp cloth. Do not use caustic cleaners or abrasives.
• Keep device away from dust, dirt, and moisture. Clean ventilation ports regularly with a gentle puff of air.
• Follow all battery recommendations, disposal, and safety information detailed in this guide.
BATTERY SAFETY
Clean the battery contacts and also those of the device prior
to battery installation. Remove batteries from device which
is not to be used for an extended period of time. Replace all
batteries of a set at the same time. Only batteries of the same
or equivalent type as recommended are to be used. Ensure the
batteries are installed with correct polarity (+ and -). Promptly
remove dead or expired batteries.
CAUTION: DO NOT mix old and new batteries or
batteries of different types. DO NOT use rechargeable
batteries. DO NOT recharge non-rechargeable
batteries. DO NOT short-circuit the supply terminals.
WARNING: DO NOT incinerate used batteries. DO NOT
dispose of batteries in fire, because they could explode
or leak.
BATTERY DISPOSAL
Dispose of old or defective batteries in an environmentally safe
way and in accordance with your local laws and regulations.

1
KNOW YOUR LED DIGITAL CLOCK
Congratulations on your new CRAFTSMAN product. To ensure the best possible product performance,
please read this manual in its entirety and retain it for future reference.
LED Digital Clock
CMXWDCR75095/CMXWDCR75095M
BACK OF DISPLAY
FRONT OF DISPLAY
7 Integrated Keyhole Hangers
• For easy wall mounting
8 VERSATRACK™ Hang Hooks
• Compatible with CRAFTSMAN
VERSATRACK Trackwall system
9 Auto DST Switch
• Switch to ON if you live in an area that
observes DST, even if it's currently not
Daylight Saving Time
10 Fold-Out Stand
11 Battery Compartment
12 Battery Compartment Cover
13 Built-In Cord Storage
• Secures excess cord
14 Power Adapter
1 Clock
2 AM/PM Indicator
3 Auto Indicator
• Indicates display is in
auto-dimming brightness mode
4 –Button
• For setup preferences and
decreasing display brightness
5 SET Button
• For setup preferences
6 +Button
• For setup preferences and
increasing display brightness
3
2
1 4 5 6
7
9
1011
12
8
14 13

2
HOW TO SET UP YOUR LED DIGITAL CLOCK
Setup Requires:
• LED Digital Clock
• Power Adapter
• VERSATRACK™ Hang Hooks (2)
• Instruction Manual
Optional (Not Included)
• (2) AAA batteries
Be sure to use high-quality alkaline or lithium batteries.
STEP 1
Insert batteries and plug in the power
adapter.
NOTICE:
Batteries are a backup power source to preserve settings in
the event of a power outage. Power adapter is required as the
power source of this product.
STEP 2
Set the Time, Date & Units
Press and hold the "SET" button to enter SET MODE. Once in
SET MODE the preference you are currently setting will blink
on the LED Digital Clock.
To adjust the currently selected (flashing) item, press and
release the“+”or “–“ buttons (press and HOLD to fast
adjust).
To save your adjustments, press and release the“SET”button
to adjust the next preference. The preference set order is as
follows:
• CLOCK HOUR
• CLOCK MINUTE
• CALENDAR MONTH
• CALENDAR DAY
• CALENDAR YEAR
You will automatically exit SET MODE if no buttons are
pressed for 5 seconds. Enter SET MODE at any time by
pressing and releasing the“SET”button.
NOTE:
Date setup is for Daylight Saving Time recognition only and
will not be displayed on the clock.
STEP 3
Backlight Settings
This digital clock's color display features 5 different lighting
settings: 100%, 75%, 50%, 25%, 10%.
When the display is powered with the power adapter,
the backlight remains on at 100% brightness by default.
Manually adjust the backlight brightness by pressing and
releasing the“+”or “–“ buttons when not in SET MODE.
To enter Auto Dim mode, press the “–“ button until Auto is
shown on the display.
Auto Dim Mode
Automatically adjusts display brightness based on time of day.
6:00 PM - 5:29 AM = transitions down to 10% brightness
5:30 AM - 5:59 PM = transitions up to 100% brightness

3
STEP 4
VERSATRACK™
CRAFTSMAN LED digital clocks can be mounted to the wall using
the CRAFTSMAN VERSATRACK Trackwall System. Use the included
hang hooks and screws to attach to the back of the clock, as
shown. The clock is now ready to be mounted to the Trackwall.
WARNING: If rearranging other tools that may already
be utilizing the VERSATRACK Trackwall, ensure switches
are off and that any battery packs have been removed.
An accidental startup could cause injury.
WARNING: To reduce the risk of serious personal injury,
do not use a damaged VERSATRACK integral hang hook or
VERSATRACK Trackwall. A damaged VERSATRACK integral
hang hook or VERSATRACK Trackwall will not support the
weight of the tool.
WARNING: To reduce the risk of serious personal injury, DO
NOT suspend tool overhead or suspend objects from the
integral hang hook. ONLY suspend tool on the VERSATRACK
Trackwall using the integral hang hook.
WARNING: The VERSATRACK integral hang hook is intended
to mount the tool onto a VERSATRACK Trackwall rail. Do not
use the integral hang hook to mount the tool to any other
surface.
WARNING: The VERSATRACK integral hang hook is not a belt
hook.
WARNING: When hanging objects on a VERSATRACK
Trackwall rail, adequately space the tools in order to not
exceed 75 lb (35 kg) per linear foot.
WARNING: Before using the tool make sure that the
VERSATRACK integral hang hook is returned to its original
position.
Find more information at https://www.craftsman.com/products/
storage-garage/versatrack-trackwall-system.

4
SPECIFICATIONS
Power 9-ft. 9V, 1.2A power adapter (included)
2 x AAA alkaline or lithium batteries (for backup; optional)
REGISTER ONLINE
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a
problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof ofpurchase.
• YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is
required under the Federal Consumer SafetyAct.
Register online at www.craftsman.com/registration
FCC Radio Frequency Interference
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiver’s antenna.
• Increase the distance between the equipment
and the receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
To assure continued appliance, any changes or
modifications not expressly approved by the party
responsible for compliance could voice the user's
authority to operate this equipment. (Example: use only
shielded interface cables when connecting to computer or
peripheral devices).
FCC Warning
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and
your body.
REGULATORY INFORMATION

5
One-Year Limited Warranty
The Manufacturer will repair or replace, without charge, any
defects due to faulty materials or workmanship for one year
from the date of purchase. This warranty does not cover
part failure due to normal wear or tool abuse. For further
detail of warranty coverage and warranty repair information,
visit www.craftsman.com or call 1-888-331-4569. This
warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHERS,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, AND EXCLUDES
ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental
or consequential damages, so these limitations may not
apply to you. This warranty gives you specific legal rights
and you may have other rights which vary in certain states
or provinces.
90DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance
of your LED Digital Clock for any reason, you can return it
within 90 days from the date of purchase with a receipt for a
full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.

CRAFTSMAN®
is a registered trademark of Stanley Black & Decker, Inc., used under license.
© 2021 CRAFTSMAN

Product Manufactured by:
Chaney Instrument Company
Lake Geneva, WI 53147
U.S. & Canada Only
10/06 CMXWDCR75095M
CMXWDCR75095