Creative Lighting Solutions 17T267-LL-1 User manual

Outdoor Square Fire Pit Table User Guide
Page 1 of 15
Product has been CSA tested and certified.
THE PRODUCT WAS MANAFACTURED BY HANGZHOU CREATIVE LIVING CO.,LTD.
SAVE THESE INSTRUCTIONS
17T267-LL-1

Glass beads
Cylinder Holder
Top
Burner Cover
HARDWARE LIST
PARTS LIST :
Thank you for purchasing this quality product. Be sure to
check all packing material carefully for small parts that
may have come loose inside the carton during shipment.
FIRE TABLE SHORELINE WHITE
ITEM NO: 17T267-LL-1
I x 4
H x 12
ASSEMBLY INSTRUCTIONS
Left Side Back
M6x30mm
Bolt
Door
Flat Washer Battery
8
Right Side
G
C
Bolt
J x 16 L x 1
M6x20mm
Allen Wrench
1/4"x15mm
M x 1
K
K
E
D
F
c
IJ
H
M
L
G

1. Attach the left side (c),right side(D),and back
(E) with 8 bolts M6*20mm (H) and 8 flat washer
(J) by using the allen wrench (M) as shown on
the right,(see figure1).
M
M
H
I
J
J
2.Attach the gas cylinder holder (G) to the left side (c) and right side(D) with 4 bolts M6*35mm
(I) and 4 flat washer (J) by using the allen wrench (M) ,(see figure2).

4.Turn over the assembled frame ,attach to the top (B) with 4 bolts M6*20mm (H) and 4 flat washer (J)
by using the allen wrench (M) ,and keep the ignition panel directly facing the door (F) ,(see figure3).
5.Turn over the table ,and attach the door (F) to the frame show as right ,(see figure4).
M
H
J

H
and close the door,(see figure 6).