Creative STAGE SE User manual

110 x 2 = 220
160 x 2 = 320
󲖸󱿠󲖸󷳋
󱡋󵫞󱜂󲄘󱴙󸛝󹠴󸛡󱡋󵫞󸛚󴁩

QUICK START GUIDE
Under-monitor Soundbar With Bluetooth
®
And USB Digital Audio


creative.com/register

creative.com/support
MULTI-LANGUAGE QUICK START GUIDE DOWNLOAD
creative.com/support/StageSE
[FR] TÉLÉCHARGEMENT DU GUIDE DE DÉMARRAGE RAPIDE MULTI-LANGUES
[DE] MEHRSPRACHIGE SCHNELLSTARTANLEITUNG HERUNTERLADEN
[ES] DESCARGA DE LA GUÍA DE INICIO RÁPIDO EN MÚLTIPLES IDIOMAS
[IT] DOWNLOAD DELLA GUIDA DI AVVIO RAPIDO MULTILINGUA
[NL] MEERTALIGE SNELSTARTGIDS DOWNLOAD
[RU] МНОГОЯЗЫЧНОЕ КРАТКОЕ РУКОВОДСТВО ЗАГРУЗИТЬ
[PL] POBIERZ PRZEWODNIK SZYBKIEGO STARTU W WIELU JĘZYKU
[CZ] STÁHNOUT VÍCEJAZYKOVÝ RYCHLÝ NÁVOD K POUŽITÍ
[SK] STIAHNUŤ SI RÝCHLY NÁVOD NA ŠTARTOVANIE VIAC JAZYKOV
[JP] 󲡕󸌫󸑤
[CS] 󱘕󸱠󲡕󸛓󸌫󳗐󸷀󱡋󵫞󳬘󱻣
[CT] 󱘕󸮛󲡕󸑤󸌫󳗐󸷀󱡋󵫞󳬘󱻣
[KO] 󻁓󺫜󼌣󾖴󻯏󻛧󾖴󼁋󼔀󾖴󺥯󼓣󻉋󾖴󻁓󼐣󻗋󻉋
[NO] NEDLASTING AV HURTIGSTARTVEILEDNING FOR FLERE SPRÅK
[FI] MONIKIELINEN PIKA-ALOITUSOPPAAN LATAUS
[SV] FLERSPRÅKIG SNABBSTARTSGUIDE LADDA NER
[DA] DOWNLOAD AF HURTIG STARTVEJLEDNING PÅ FLERE SPROG
OVERVIEW CONTROLS
Volume Control Knob
LED Indicator
Multifunction Button (Power, Source Selection, Bluetooth
®)
DC-in Power Port
USB-A Port (For Firmware Updates Only)
USB-C Port (For USB Audio Playback)
Note: Creative Stage SE will automatically initiate Bluetooth pairing when it’s
powered on and the source input is switched to Bluetooth . By default, the soundbar’s
source input is USB audio. The soundbar will remain in the last used source input
subsequently.
1
2
3
4
5
6
2s
x1
x2
Button
LED Indicator
FunctionAction
Soundbar State
Blinking Blue
Bluetooth Pairing Mode
Blinking LED
(Source Color)
Volume Adjustment
Solid Red Standby
Solid Blue
Bluetooth Paired
Solid Purple USB Audio
1
4
5
6
2 3
ON OFF
USB
AUDIO
VOICE PROMPT
ON
VOICE PROMPT
OFF

IR REMOTE CONTROL INTERCHANGEABLE AC PLUGS
CONNECTIVITY
TECHNICAL SPECIFICATIONS
Power Output: 12W RMS x 2
Total System Peak Power: 48W
Frequency Range: 50–20,000 Hz
SNR: ≥85 dB
Operating Frequency: 2402–2480 MHz
Operating Range: Up to 10m / 33 ft, measured in open space. Walls and structures may
aect range of device
Maximum RF Output Power: 7 dBm
Bluetooth Version: Bluetooth 5.3”
Supported Bluetooth Proles: A2DP (Advanced Audio Distribution Prole), AVRCP (Audio
/ Video Remote Control Prole)
Supported Codec: SBC
Soundbar Input Rating: 15V 2.0A
Max Operating Temperature: 45°C
Power Adapter Model: GJ30WD-1500200DP
Input: 100–240V~, 50/60 Hz 0.8A
Output: 15V 2.0A, 30.0W
For CS (China)- 󹲙󵠈󷕕󲓖
Note: Compliance marking are located at the bottom of this product
Power Button
Press once to turn on the soundbar.
Press once again to turn it o.
Input Selection Button
Press once to switch between USB Audio mode
and Bluetooth mode.
Press and hold for 2s to initiate Bluetooth
pairing mode.
Mute Button
Press once to mute the soundbar.
Press once again to unmute.
Volume + Button
Press once to increase volume.
Press and hold to incrementally increase
volume.
Volume - Button
Press once to decrease volume.
Press and hold to incrementally decrease
volume.
Play / Pause Button
Press once to play / pause audio playback.
Previous Track Button
Press once to return to previous track.
Next Track Button
Press once to skip to next track.
Tone - Button
Press to increase audio warmth, this will
increase the prominence of bass reproduction
and vocals.
Tone + Button
Press to increase audio brilliance, this will
increase the prominence of high and upper mid
frequencies, making the audio crisper.
Surround Button
Press once to activate Surround mode.
Press once again to turn it o.
Dialog Button
Press once to activate Dialog Plus mode.
Press once again to turn it o.
Reset Button
Press once to revert all changes made, including
Tone, Surround, and Dialog settings.
a
i
c
k
b
j
d
l
f
e
m
g
h
a
g
m
i
k
b
f
e
h
j
l
d
c
MASTER RESET
Press and hold the Multifunction button for 8s to perform a Master Reset. Upon com-
pletion, a voice prompt will trigger with the prompt “Reset To Factory Default” and the
soundbar will revert to its default state. Master Reset is reserved for cases where users
encounter issues while the soundbar is in use or during situations such as: Bluetooth
Pairing failure, random LED blinks, or to reset all data.
8s
Tablets / Mobile Devices
PC / Mac
Bluetooth mode
Wall socket
Back View
PC / Mac PS5™ PS4™ Nintendo Switch
(Docked Mode)
Nintendo Switch™
(Handheld Mode)
Creative Stage SE features a power adapter with interchangeable AC plugs, suitable for
use in multiple regions. Refer to the instructions below for more information.
Note: Interchangeable AC plug(s) are bundled based on the requirements in their
respective countries and are suitable for use in regions using the same AC plugs.
Replacing Interchangeable AC Plugs
i) Place the AC plug on the
power adapter, then push
it down and turn clockwise
direction to lock it
ii) Press to release the AC
plug from its attachment
iii) To replace or reattach
the AC plug, refer to the
initial steps given
*For Singapore, only bundled EU AC plug is available.
1
2
ChinaUSA / Canada /
Japan / Taiwan
Australia
UK / Hong Kong /
Saudi Arabia / UAE / Malaysia
Korea
(Model KC)
EU / Singapore*
(Model DE-1)
3

Creative Stage Air V3 (MF8410) Additional Safety and Regulatory information
SAFETY & REGULATORY INFORMATION
The following sections contain notices for various countries.
CAUTION:
This product is intended for use with FCC/CE certified computer equipment. Please check
the equipment operating/installation manual and/or with the equipment manufacturer to
verify/confirm if your equipment is suitable prior to the installation or use of the product.
Notice for USA
Federal Communication Commission (FCC) Interference Statement
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if no installed and used in accordance with instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC
Rules, this device must be installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded.
Operation with non-certified computers or non-shielded cables may result in interference to radio or
television reception.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the device.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

Creative Stage Air V3 (MF8410) Additional Safety and Regulatory information
SAFETY & REGULATORY INFORMATION
Notice for Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least
20cm must be maintained between the antenna of this device and all persons.
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation
d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil et toutes les personnes.
MODIFICATION: Any changes or modification not expressly approved by the grantee of this device
could void the user’s authority to operate the device.
Toute modification non approuvée explicitement par le fournisseur de licence de l’appareil peut
entraîner l’annulation du droit de l’utilisateur à utiliser l’appareil.