Creek Company 856 User manual

ANCHOR DROP•MOTOR MOUNT
ROD HOLDER COMBO KIT
ITEM #856
ASSEMBLY INSTRUCTIONS
(1) Motor Mount w/ Anchor Line Pulley
(4) U-Bolts w/ Nuts
(1) Underseat Lift and Lock Anchor Drop System
with Extension Arms attached
Step 1. Attach Motor Mount to Cargo Deck using the 4 included U-Bolts. Raised transom should be at the back
(see figure 1).
Step 2. Attach Underseat Lift and Lock Anchor Drop System to Seat Support Frame Member by removing plastic
caps on square tubing of Seat Support Frame Member and inserting Extension Arms. Secure Extension Arms in
square tubing using supplied Nuts and Bolts or seat screws (not supplied with kit) if your boat has a plastic seat
(see figure 2).
Step 3. Attach Anchor Line Storage Bag to forward cross-tube of the Seat Support Frame Member using Straps
and Ladder locks attached to bag (see figure 3).
Step 4. Attach Rod Holder to frame where the Cargo Deck attaches to Right or Left Main Frame pieces by remov-
ing Snap Pin, putting Rod Holder in place and re-attaching Snap Pin (see figure 4).
We recommend putting the Motor Mount in the center of the Cargo Deck if you will be using the Anchor Drop
System so that your anchor line runs as straight as possible from the Motor Mount Anchor Line Pulley to the
Under-Seat Lift and Lock Anchor Drop System.
We Recommend the use of electric trolling motors only with this system. We also recommend 5/16” rope and a
twelve pound anchor for use with the Anchor Drop System.
If you have any questions please call The Creek Company at 970-879-5221 x 103 Monday through Friday 9am-
5pm Mountain time, or E-mail us at [e-mail].
(2) Straight Nuts and Bolts
(1) Anchor Line Storage Bag
(1) Rod Holder
FOR CREEK COMPANY ODC 816, ODC SPORT, SUPER SPORT, SPORT XL,
SUPER SPORT 9, AND ODC 909PONTOON BOATS
INCLUDES:
Other accessories are available for your Pontoon Boat. Ask for them where you bought your Pontoon Boat,
or visit the Creek Company Store at www.CreekCompany.com
The Creek Company Ltd. , PO Box 773892, Steamboat Springs, CO 80477
970-879-5221 • fax [phone] • email: [e-mail]
Specifications and other details subject to change without notice.
All Creek Company products are guaranteed against defects in material and workmanship for the life of the product to
the original owner. This does not cover damage due to misuse or normal wear and tear.

To Front of Boat
To Back of Boat
Left Pontoon
Right Pontoon
to Anchor (not Included)
Cargo
Deck
Anchor Rope
(not Included)
Anchor Line
Pulley
Underneath View of Boat
Unlocked
Figure 6
Underseat Lift
and Lock
Anchor System
Locked
Anchor Rope
Not Included
Figure 3
Anchor Line Storage
Bag Attachment
Bag straps to front
of Seat Support
Frame Member
for easy storage
of excess
anchor line.
Figure 4
Rod Holder
Diagram
Rod
Holder
Shown attached to the
left side of boat.
Figure 5
Underseat View of Underseat Lift
and Lock Anchor System
Designed to be used while sitting in seat to Back of Boat
Figure 1
Underneath View
of Cargo Deck
Raised
Transom To Rear
of Boat
To Front
of Boat
Figure 2
Underneath View
of Seat Support
Frame
Member
To Front
of Boat
To Rear
of Boat
Remove
plastic caps
Extension
Arms