Crestron PW-1215WU User manual

Installation Guide
Power Pack
Crestron PW-1215WU
Crestron Electronics, Inc. Installation Guide - DOC. 6971A
15 Volvo Drive Rockleigh, NJ 07647 (2027249)
Tel: 888.CRESTRON 08.10
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
This document was prepared by the Technical Documentation department at: Return and Warranty Policies
Merchandise Returns / Repair Service
CRESTRON Limited Warranty
1. No merchandise may be returned for credit, exchange or service without prior authorization from
CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized
CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request
an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the
problem, name and phone number of contact person, RMA number and return address.
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in
materials and workmanship under normal use for a period of three (3) years from the date of purchase
from CRESTRON, with the following exceptions: disk drives and any other moving or rotating
mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year;
touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps
are not covered.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows 95/98/Me/XP/Vista/7 and
Windows NT/2000 are trademarks of Microsoft Corporation.
2. Products may be returned for credit, exchange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to
CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number
clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA
number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute
discretion to charge a 15% restocking fee plus shipping costs on any products returned with an
RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty,
if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim
made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by
the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law
are limited to the terms of this limited warranty. This warranty statement supersedes all previous
warranties.
Regulatory Compliance
This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.
Energy Efficiency Level
The PW-1215WU complies with section 301 of the Energy Independence and Securities
Act (EISA).
As of the date of manufacture, the PW-1215WU has been tested and found to comply
with specifications for CE marking, standards per EMC and Radiocommunications
Compliance Labelling and Japan electrical appliance and material safety law.
IV
PS
E

Installation Guide
Power Pack
Crestron PW-1215WU
Crestron Electronics, Inc. Installation Guide - DOC. 6971A
15 Volvo Drive Rockleigh, NJ 07647 (2027249)
Tel: 888.CRESTRON 08.10
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
This document was prepared by the Technical Documentation department at: Return and Warranty Policies
Merchandise Returns / Repair Service
CRESTRON Limited Warranty
1. No merchandise may be returned for credit, exchange or service without prior authorization from
CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized
CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request
an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the
problem, name and phone number of contact person, RMA number and return address.
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in
materials and workmanship under normal use for a period of three (3) years from the date of purchase
from CRESTRON, with the following exceptions: disk drives and any other moving or rotating
mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year;
touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps
are not covered.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows 95/98/Me/XP/Vista/7 and
Windows NT/2000 are trademarks of Microsoft Corporation.
2. Products may be returned for credit, exchange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to
CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number
clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA
number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute
discretion to charge a 15% restocking fee plus shipping costs on any products returned with an
RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty,
if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim
made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by
the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law
are limited to the terms of this limited warranty. This warranty statement supersedes all previous
warranties.
Regulatory Compliance
This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.
Energy Efficiency Level
The PW-1215WU complies with section 301 of the Energy Independence and Securities
Act (EISA).
As of the date of manufacture, the PW-1215WU has been tested and found to comply
with specifications for CE marking, standards per EMC and Radiocommunications
Compliance Labelling and Japan electrical appliance and material safety law.
IV
PS
E

Description
The PW-1215WU is a regulated universal LPS (limited power source)
power pack that is used to power a 12 Volt Crestron®product from a
standard AC receptacle (100-240 VAC, 50-60 Hz). It is designed for
indoor use only.
CAUTION: Connect this power pack only to a Crestron device that is
rated at 12 Volts (regulated) and no more than 1.5 Amps. Plugging this
power pack into a Crestron device that has a different rating could
damage the device or the power pack.
Specifications
Specifications for the PW-1215WU are listed in the following table.
PW-1215WU Specifications
SPECIFICATION DETAILS
Power
Input
Output 100-240 Volts AC, 50/60 Hz
12 Volts DC @ 1.5 Amps, regulated,
using male barrel (5.5 x 2.5 mm)
connector
Cable Length 6 feet (~1.8 meters)
Environmental
Temperature
Humidity 41° to 104° F (5° to 40° C)
10% to 90% RH (non-condensing)
Dimensions
Height
Width
Depth
2.90 in (74 mm)
1.72 in (44 mm)
1.38 in (35 mm) without adapter
Weight 5 oz (144 g)
Further Inquiries
If you cannot locate specific information or have questions after
reviewing this guide, please take advantage of Crestron’s award
winning curstomer service team by calling Crestron at
1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp) to ask questions about Crestron
products. First time users will need to establish a user account to fully
benefit from all available features.
PW-1215WU Power Pack Adapter Insert Set
Setup
Complete the following steps to properly set up and connect the power
pack.
PW-1215WU Power Pack (Shown With and Without Protective Insert)
1. Slide the thumb switch on the PW-1215WU downward and
remove the protective insert from the unit by pulling the
bottom part toward you, then sliding it downward to release
the tab.
3. Slide the thumb switch on the PW-1215WU downward and
install the adapter insert into the unit, top part first to engage
the tab, then press the bottom part into place.
2. Select the proper adapter insert from the set of four.
5. Insert the power pack into an active AC receptacle.
4. Attach the barrel connector to the device to be powered.
PW-1215WU Power Pack Hookup
North America
Japan United Kingdom
Hong Kong
Singapore
Europe
South America Australia
China
AC
Receptacle
PW-1215WU
Power Pack
Crestron
Device
Please remove it before use

Description
The PW-1215WU is a regulated universal LPS (limited power source)
power pack that is used to power a 12 Volt Crestron®product from a
standard AC receptacle (100-240 VAC, 50-60 Hz). It is designed for
indoor use only.
CAUTION: Connect this power pack only to a Crestron device that is
rated at 12 Volts (regulated) and no more than 1.5 Amps. Plugging this
power pack into a Crestron device that has a different rating could
damage the device or the power pack.
Specifications
Specifications for the PW-1215WU are listed in the following table.
PW-1215WU Specifications
SPECIFICATION DETAILS
Power
Input
Output 100-240 Volts AC, 50/60 Hz
12 Volts DC @ 1.5 Amps, regulated,
using male barrel (5.5 x 2.5 mm)
connector
Cable Length 6 feet (~1.8 meters)
Environmental
Temperature
Humidity 41° to 104° F (5° to 40° C)
10% to 90% RH (non-condensing)
Dimensions
Height
Width
Depth
2.90 in (74 mm)
1.72 in (44 mm)
1.38 in (35 mm) without adapter
Weight 5 oz (144 g)
Further Inquiries
If you cannot locate specific information or have questions after
reviewing this guide, please take advantage of Crestron’s award
winning curstomer service team by calling Crestron at
1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp) to ask questions about Crestron
products. First time users will need to establish a user account to fully
benefit from all available features.
PW-1215WU Power Pack Adapter Insert Set
Setup
Complete the following steps to properly set up and connect the power
pack.
PW-1215WU Power Pack (Shown With and Without Protective Insert)
1. Slide the thumb switch on the PW-1215WU downward and
remove the protective insert from the unit by pulling the
bottom part toward you, then sliding it downward to release
the tab.
3. Slide the thumb switch on the PW-1215WU downward and
install the adapter insert into the unit, top part first to engage
the tab, then press the bottom part into place.
2. Select the proper adapter insert from the set of four.
5. Insert the power pack into an active AC receptacle.
4. Attach the barrel connector to the device to be powered.
PW-1215WU Power Pack Hookup
North America
Japan United Kingdom
Hong Kong
Singapore
Europe
South America Australia
China
AC
Receptacle
PW-1215WU
Power Pack
Crestron
Device
Please remove it before use

Description
The PW-1215WU is a regulated universal LPS (limited power source)
power pack that is used to power a 12 Volt Crestron®product from a
standard AC receptacle (100-240 VAC, 50-60 Hz). It is designed for
indoor use only.
CAUTION: Connect this power pack only to a Crestron device that is
rated at 12 Volts (regulated) and no more than 1.5 Amps. Plugging this
power pack into a Crestron device that has a different rating could
damage the device or the power pack.
Specifications
Specifications for the PW-1215WU are listed in the following table.
PW-1215WU Specifications
SPECIFICATION DETAILS
Power
Input
Output 100-240 Volts AC, 50/60 Hz
12 Volts DC @ 1.5 Amps, regulated,
using male barrel (5.5 x 2.5 mm)
connector
Cable Length 6 feet (~1.8 meters)
Environmental
Temperature
Humidity 41° to 104° F (5° to 40° C)
10% to 90% RH (non-condensing)
Dimensions
Height
Width
Depth
2.90 in (74 mm)
1.72 in (44 mm)
1.38 in (35 mm) without adapter
Weight 5 oz (144 g)
Further Inquiries
If you cannot locate specific information or have questions after
reviewing this guide, please take advantage of Crestron’s award
winning curstomer service team by calling Crestron at
1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp) to ask questions about Crestron
products. First time users will need to establish a user account to fully
benefit from all available features.
PW-1215WU Power Pack Adapter Insert Set
Setup
Complete the following steps to properly set up and connect the power
pack.
PW-1215WU Power Pack (Shown With and Without Protective Insert)
1. Slide the thumb switch on the PW-1215WU downward and
remove the protective insert from the unit by pulling the
bottom part toward you, then sliding it downward to release
the tab.
3. Slide the thumb switch on the PW-1215WU downward and
install the adapter insert into the unit, top part first to engage
the tab, then press the bottom part into place.
2. Select the proper adapter insert from the set of four.
5. Insert the power pack into an active AC receptacle.
4. Attach the barrel connector to the device to be powered.
PW-1215WU Power Pack Hookup
North America
Japan United Kingdom
Hong Kong
Singapore
Europe
South America Australia
China
AC
Receptacle
PW-1215WU
Power Pack
Crestron
Device
Please remove it before use

Description
The PW-1215WU is a regulated universal LPS (limited power source)
power pack that is used to power a 12 Volt Crestron®product from a
standard AC receptacle (100-240 VAC, 50-60 Hz). It is designed for
indoor use only.
CAUTION: Connect this power pack only to a Crestron device that is
rated at 12 Volts (regulated) and no more than 1.5 Amps. Plugging this
power pack into a Crestron device that has a different rating could
damage the device or the power pack.
Specifications
Specifications for the PW-1215WU are listed in the following table.
PW-1215WU Specifications
SPECIFICATION DETAILS
Power
Input
Output 100-240 Volts AC, 50/60 Hz
12 Volts DC @ 1.5 Amps, regulated,
using male barrel (5.5 x 2.5 mm)
connector
Cable Length 6 feet (~1.8 meters)
Environmental
Temperature
Humidity 41° to 104° F (5° to 40° C)
10% to 90% RH (non-condensing)
Dimensions
Height
Width
Depth
2.90 in (74 mm)
1.72 in (44 mm)
1.38 in (35 mm) without adapter
Weight 5 oz (144 g)
Further Inquiries
If you cannot locate specific information or have questions after
reviewing this guide, please take advantage of Crestron’s award
winning curstomer service team by calling Crestron at
1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp) to ask questions about Crestron
products. First time users will need to establish a user account to fully
benefit from all available features.
PW-1215WU Power Pack Adapter Insert Set
Setup
Complete the following steps to properly set up and connect the power
pack.
PW-1215WU Power Pack (Shown With and Without Protective Insert)
1. Slide the thumb switch on the PW-1215WU downward and
remove the protective insert from the unit by pulling the
bottom part toward you, then sliding it downward to release
the tab.
3. Slide the thumb switch on the PW-1215WU downward and
install the adapter insert into the unit, top part first to engage
the tab, then press the bottom part into place.
2. Select the proper adapter insert from the set of four.
5. Insert the power pack into an active AC receptacle.
4. Attach the barrel connector to the device to be powered.
PW-1215WU Power Pack Hookup
North America
Japan United Kingdom
Hong Kong
Singapore
Europe
South America Australia
China
AC
Receptacle
PW-1215WU
Power Pack
Crestron
Device
Please remove it before use

Installation Guide
Power Pack
Crestron PW-1215WU
Crestron Electronics, Inc. Installation Guide - DOC. 6971A
15 Volvo Drive Rockleigh, NJ 07647 (2027249)
Tel: 888.CRESTRON 08.10
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
This document was prepared by the Technical Documentation department at: Return and Warranty Policies
Merchandise Returns / Repair Service
CRESTRON Limited Warranty
1. No merchandise may be returned for credit, exchange or service without prior authorization from
CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized
CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request
an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the
problem, name and phone number of contact person, RMA number and return address.
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in
materials and workmanship under normal use for a period of three (3) years from the date of purchase
from CRESTRON, with the following exceptions: disk drives and any other moving or rotating
mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year;
touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps
are not covered.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows 95/98/Me/XP/Vista/7 and
Windows NT/2000 are trademarks of Microsoft Corporation.
2. Products may be returned for credit, exchange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to
CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number
clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA
number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute
discretion to charge a 15% restocking fee plus shipping costs on any products returned with an
RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty,
if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim
made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by
the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law
are limited to the terms of this limited warranty. This warranty statement supersedes all previous
warranties.
Regulatory Compliance
This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.
Energy Efficiency Level
The PW-1215WU complies with section 301 of the Energy Independence and Securities
Act (EISA).
As of the date of manufacture, the PW-1215WU has been tested and found to comply
with specifications for CE marking, standards per EMC and Radiocommunications
Compliance Labelling and Japan electrical appliance and material safety law.
IV
PS
E

Installation Guide
Power Pack
Crestron PW-1215WU
Crestron Electronics, Inc. Installation Guide - DOC. 6971A
15 Volvo Drive Rockleigh, NJ 07647 (2027249)
Tel: 888.CRESTRON 08.10
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
This document was prepared by the Technical Documentation department at: Return and Warranty Policies
Merchandise Returns / Repair Service
CRESTRON Limited Warranty
1. No merchandise may be returned for credit, exchange or service without prior authorization from
CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized
CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request
an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the
problem, name and phone number of contact person, RMA number and return address.
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in
materials and workmanship under normal use for a period of three (3) years from the date of purchase
from CRESTRON, with the following exceptions: disk drives and any other moving or rotating
mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year;
touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps
are not covered.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows 95/98/Me/XP/Vista/7 and
Windows NT/2000 are trademarks of Microsoft Corporation.
2. Products may be returned for credit, exchange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to
CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number
clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA
number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute
discretion to charge a 15% restocking fee plus shipping costs on any products returned with an
RMA.
3. Return freight charges following repair of items under warranty shall be paid by CRESTRON,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON
dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty,
if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for any claim
made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for parts or
labor. Repaired or replaced equipment and parts supplied under this warranty shall be covered only by
the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or
implied, nor authorizes any other party to offer any warranty, including any implied warranties of
merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law
are limited to the terms of this limited warranty. This warranty statement supersedes all previous
warranties.
Regulatory Compliance
This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.
Energy Efficiency Level
The PW-1215WU complies with section 301 of the Energy Independence and Securities
Act (EISA).
As of the date of manufacture, the PW-1215WU has been tested and found to comply
with specifications for CE marking, standards per EMC and Radiocommunications
Compliance Labelling and Japan electrical appliance and material safety law.
IV
PS
E
Table of contents
Other Crestron Power Pack manuals

Crestron
Crestron PW-2410RU User manual

Crestron
Crestron pw-1205ru User manual

Crestron
Crestron PW-1830RU User manual

Crestron
Crestron CSA-PWS40 User manual

Crestron
Crestron PW-2420RU User manual

Crestron
Crestron PW-2407RU User manual

Crestron
Crestron ST-BTP User manual

Crestron
Crestron PW-1280RU User manual
Popular Power Pack manuals by other brands

Centech
Centech 62376 Owner's manual & safety instructions

C-TECH-I
C-TECH-I ST2000 Series user manual

Rocket Fish
Rocket Fish RF-GDS010 Quick setup guide

Radio Shack
Radio Shack Universal Rechargeable Ni-MH PowerPack for 3/4.5/6/7.5/9 Volt DC... owner's manual

Hama
Hama HD-10 operating instructions

ring
ring RPP100 Standard user manual