Crestron MP-WP-2XLRO-1G User manual

MP-WP-2XLRO-1G and
MP-WP-2RCAO-1G
Media Presentation Wall Plate - XLR or RCA,
Black, 1-Gang
Product Manual
Crestron Electronics, Inc.

The original language version of this document is U.S. English.
All other languages are a translation of the original document.
Regulatory Model: M202217001
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2023 Crestron Electronics, Inc.

Contents
Overview 5
MP-WP-2XLRO-1G Features 5
MP-WP-2RCAO-1G Features 5
Specifications 6
MP-WP-2XLRO-1G Specifications 7
Product Specifications 7
Dimension Drawings 8
MP-WP-2RCAO-1G Specifications 9
Product Specifications 9
Dimension Drawings 10
Installation 11
In the Box 11
Mounting 11
Mounting into a 1-Gang Electrical Box 12
Mounting onto a Rack Rail 13
Mounting to a Flat Surface 14
Connect the Device 15
Resources 17
Crestron Support and Training 17
Programmer and Developer Resources 17
Product Certificates 17
Product Manual — Doc. 9390A Contents • iii

iv • Contents Product Manual — Doc. 9390A

Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 5
Overview
The MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Media Presentation Wall Plates complete the
total Crestron package, ensuring end-to-end Crestron quality for every installation. A range of
wall plates is offered to support all types of analog and digital video, audio, and control signals.
MP-WP-2XLRO-1G Features
The MP-WP-2XLRO-1G provides a single-gang wall mount for (2) XLR outputs. The rear of the
wall plate features a six-pin line-level audio input for two sources.
Key features include:
l2 XLR line-level output connectors
l2 line-level audio inputs
lSingle-gang U.S. wall box installation
lMountable on rack rail or flat surface
lFaceplate included
MP-WP-2RCAO-1G Features
The MP-WP-2RCAO-1G provides a single-gang wall mount for (2) RCA connections. The rear of
the wall plate features a six-pin line-level audio connection for two inputs or outputs.
Key features include:
l2 RCA connectors
l2 line-level audio connections
lSingle-gang U.S. wall box installation
lMountable on rack rail or flat surface
lFaceplate included

6 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A
Specifications
This section provides the following information:
•MP-WP-2XLRO-1G Specifications
•MP-WP-2RCAO-1G Specifications

Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 7
MP-WP-2XLRO-1G Specifications
Product specifications for the MP-WP-2XLRO-1G are provided below.
Product Specifications
Connectors
XLR 1-2 (OUTPUT) (2) Balanced XLRoutput ports
INPUT1-2 (1) 6-pin 3.5 mm detachable terminal block;
Balanced line-level audio input;
Pins 1-3:Input 1, Pins 4-6:Input 2
Environmental
Temperature 32° to 111° F (0° to 40° C)
Humidity 10% to 95% RH (noncondensing)
Enclosure
Mounting Mountable on the following:
1-gang U.S. electrical box or plaster ring (not included),
3.5 in. (26 mm) electrical box depth recommended;
Rack rail;
Flat surface with included mounting bracket
Faceplate Requires FP-G1 decorative faceplate (sold separately)
Dimensions
Height 4.12 in. (105 mm)
Width 1.72 in. (44 mm)
Depth 1.85 in. (47 mm)
Weight
0.17 lb (80 g)
Compliance
Regulatory Model: M202217001
IC, FCC Part 15 Class B digital device

8 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A
Dimension Drawings

Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 9
MP-WP-2RCAO-1G Specifications
Product specifications for the MP-WP-2RCAO-1G are provided below.
Product Specifications
Connectors
RCA 1-2 (2) Unbalanced RCA pass-through ports
Rear 1-2 (1) 6-pin 3.5 mm detachable terminal block;
Balanced line-level audio connector;
Pins 1-3:Connection 1, Pins 4-6:Connection 2
Environmental
Temperature 32° to 111° F (0° to 40° C)
Humidity 10% to 95% RH (noncondensing)
Enclosure
Mounting Mountable on the following:
1-gang U.S. electrical box or plaster ring (not included),
3.5 in. (26 mm) electrical box depth recommended;
Rack rail;
Flat surface with included mounting bracket
Faceplate Requires FP-G1 decorative faceplate (sold separately)
Dimensions
Height 4.12 in. (105 mm)
Width 1.72 in. (44 mm)
Depth 1.66 in. (42 mm)
Weight
0.15 lb (72 g)
Compliance
Regulatory Model: M202217001
IC, FCC Part 15 Class B digital device

10 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A
Dimension Drawings

Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 11
Installation
Refer to the sections below to install the Media Presentation Wall Plates.
In the Box
Qty. Description
1 MP-WP-2RCAO-1G, Media Presentation Wall Plate - RCA, Black, 1-Gang
or
MP-WP-2XLRO-1G, Media Presentation Wall Plate - XLR, Black, 1-Gang
Additional Items
2 Screws, 6-32 x 3/4 in., Truss Head, Combo (2009211)
Mounting
The Media Presentation Wall Plate can be mounted into a 1-gang electrical box, or onto a flat
surface or rack rail.
NOTE: The installation process for the MP-WP-2RCAO-1G and MP-WP-2XLRO-1G is
identical. Only the MP-WP-2RCAO-1G is shown in the mounting illustrations.

12 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A
Mounting into a 1-Gang Electrical Box
To mount the wall plate into a 1-gang electrical box, follow the instructions below.
1. Make connections to the rear of the device. For details, refer to Rear Connections on page
15.
2. Using a Phillips screwdriver and two 6-32x3/4in. truss head screws, attach the wall plate
to the electrical box.
3. Using a Phillips screwdriver and two 6-32x1/4in. flat head screws (not included), attach a
FP-G1 decorator style faceplate (sold separately) to the wall plate.

Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 13
Mounting onto a Rack Rail
To mount the wall plate onto a rack rail, follow the instructions below.
1. Position the wall plate horizontally so that the holes in the left or right mounting flange
align with the holes in the rack rail.
2. Secure the wall plate to the rack rail using two mounting screws (not included).

14 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A
Mounting to a Flat Surface
To mount the wall plate to a flat surface, follow the instructions below.
1. Position the wall plate so that the holes in the mounting flange align with the mounting
bracket.
2. Connect the wall plate to the mounting bracket using a Phillips screwdriver and two SEMS
screws 6-32x1/4in. (not included).
3. Secure the mounting bracket to the flat surface using mounting screws (not included).

Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 15
Connect the Device
Make connections to the front and rear of the Media Presentation Wall Plate as described below.
NOTE:These Media Presentation WallPlates are pass-through devices. Signal can flow in
either direction.
Rear Connections
MP-WP-2RCAO-1G:The rear connections correspond to the front RCA connections as follows:
Rear Panel Front Panel
+ RCAcenter pin
-/G RCAshield
MP-WP-2XLRO-1G:The rear connections correspond to the front XLR connections as follows:
Rear Panel Front Panel
+ XLR pin 2
- XLR pin 3
G XLR pin

16 • MP-WP-2XLRO-1G and MP-WP-2RCAO-1G Product Manual — Doc. 9390A
MP-WP-2RCAO-1G Front Connections
MP-WP-2XLRO-1G Front Connections

Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 17
Resources
The following resources are provided for the MP-WP-2XLRO-1G and MP-WP-2RCAO-1G.
NOTE:You may need to provide your Crestron.com web account credentials when prompted
to access some of the following resources.
Crestron Support and Training
lCrestron True Blue Support
lCrestron Resource Library
lCrestron Online Help (OLH)
lCrestron Training Institute (CTI)Portal
Programmer and Developer Resources
lhelp.crestron.com:Provides help files for Crestron programming tools such as SIMPL,
SIMPL#, and Crestron Toolbox™ software
ldeveloper.crestron.com:Provides developer documentation for Crestron APIs, SDKs, and
other development tools
Product Certificates
To search for product certificates, refer to support.crestron.com/app/certificates.

This page is intentionally left blank.
Product Manual — Doc. 9390A MP-WP-2XLRO-1G and MP-WP-2RCAO-1G • 18

Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: [phone]
www.crestron.com
Product Manual — Doc. 9390A
06/12/23
Specifications subject to
change without notice.