Crestron PMK-6X-DSW User manual

Crestron PMK-6X-DSW
Pre-ConstructionWallMountKitfor
TPS-6X-DSW
InstallationGuide

Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW
Contents
Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW 1
Description.................................................................................................................................1
Setup..........................................................................................................................................4
Mounting.....................................................................................................................4
Installation...................................................................................................................6
Other Mounting Option Accessories...........................................................................7
Resources...................................................................................................................................8
Industry Compliance ...................................................................................................8
Reference Documents..................................................................................................8
Further Inquiries..........................................................................................................8
Future Updates ............................................................................................................8
Return and Warranty Policies....................................................................................................9
Merchandise Returns / Repair Service ........................................................................9
CRESTRON Limited Warranty...................................................................................9
All brand names, product names and trademarks are the property of their respective owners.
©2009 Crestron Electronics, Inc.
Installation Guide – DOC. 6778A Contents •i

Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW
Pre-Construction Wall Mount Kit
for TPS-6X-DSW: PMK-6X-DSW
Description
The PMK-6X-DSW is a pre-construction mount kit for the TPS-6X-DSW Wall
Mount Docking Station. The PMK-6X-DSW is used for installation on a stud. For
custom placement of the TPS-6X-DSW without a stud, use the WMKT-6X-DSW or
WMKM-6X-DSW.
The PMK-6X-DSW includes a 12-inch long, 18 AWG jumper wire to secure
docking station cabling prior to drywall installation and to avoid damaging the cables
when the opening is routed. Refer to the physical views of the PMK-6X-DSW shown
on the following pages. The table that follows lists all parts included with the
PMK-6X-DSW.
NOTE: If mounting into a material other than drywall (for example, wood lectern,
concrete or rock) use the cutout template, available in the post-construction kit
WMKM-6X-DSW or WMKT-6X-DSW. For concrete and rock mounting material,
allow for proper ventilation before mounting the TPS-6X-DSW.
NOTE: This mounting kit is to be used only with the TPS-6X-DSW Wall Mount
Docking Station.
Supplied Hardware for the PMK-6X-DSW
DESCRIPTION PART NUMBER QUANTITY
Metal, Plate, Pre-Construction 4507464 1
Metal, Plate, Cover 2022825 1
Screw, #06-32 x 1-1/2”, Pan, Phil 2007254 4
Jumper wire, 12”, 18 AWG, Black 2007838 1
Installation Guide – DOC. 6778A Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW •1

Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW
The dimensions of the PMK-6X-DSW are shown below and on the following page.
Dimensional Drawing (1 of 2)
0.56 in
(1.42 cm)
11.90 in
(30.23 cm)
8.00 in
(20.32 cm) 0.06 in
(0.15 cm)
6.35 in
(16.13 cm)
8.82 in
(22.41 cm)
#06-32 TAPPED HOLE IN EACH CORNER
SECURE 18 AWG JUMPER WIRE IN
NOTCH TO HANG CABLES AWAY FROM
CUTTING TOOLS
FOR DRYWALL SCREWS(NOT INCLUDED)
FOR DRYWALL NAILS(NOT INCLUDED)
2 •Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW Installation Guide – DOC. 6778A

Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW
Dimensional Drawing (2 of 2)
1/8 in
(4 mm)
3/16 in
(5 mm)
5 13/16 in
(148 mm)
1/2 in
(13 mm) 6 in
(152 mm)
7 3/4 in
(196 mm) 6 3/4 in
(171 mm)
5 in
(127 mm)
6 3/16 in
(158 mm)
6 1/8 in
(156 mm)
1/2 in
(13 mm)
8 15/16 in
(226 mm)
Dimensional Drawing - Cover Plate
5.85 in
(14.86 cm)
4.16 in
(10.57 cm)
0.02 in
(0.05 cm)
Installation Guide – DOC. 6778A Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW •3

Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW
Setup
Mounting
The PMK-6X-DSW consists of a single metal plate, which fastens to the stud of a
framed wall prior to hanging drywall. Standard drywall nails or screws to attach the
PMK-6X-DSW are not supplied (length can vary).
The plate is designed to provide the necessary support for the TPS-6X-DSW and can
mount to the right or left side of a stud. Confirm that the PMK-6X-DSW is level
before applying drywall.
Mounting the PMK-6X-DSW
NOTE: BE SURE
THE PLATE IS
LEVEL WHEN
MOUNTED.
PMK-6X-DSW
(4507464 )
CAUTION: Allow an air gap of at least 12 inches (30.48 cm) in the wall cavity
above and below the TPS-6X-DSW for heat dissipation.
After drywall is positioned, a rectangular opening must be made. Position the
opening to expose the #06-32 tapped holes just outside the four corners of the plate.
NOTE: Cut the drywall along the inside edge of the front of the mounting plate.
The labels on the front of the mounting plate indicate the perimeter of the opening
that should be cut out. Refer to the NOTE in “Mounting the PMK-6X-DSW” shown
in the illustration above.
4 •Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW Installation Guide – DOC. 6778A

Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW
Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation)
SCREWS (4)
#06-32 X 1 1/2" PAN,
HEAD (2007254 )
NOTE: MOUNTING PLATE
IS TO BE COVERED WITH
DRYWALL AND THEN
CUTOUT MADE AROUND
THE INSIDEOF THE
OPENING.
METAL COVER PLATE
(2022825 ) TO COVER DRYWALL
BEFORE TPS-6X-DSW IS
INSTALLED (MAY BE REQUIRED
BY LOCAL BUILDING CODES).
NOTE: BE SURE TO LEAVE
THE FOUR TAPPED HOLES
ON THE FRONT OF THE
PLATE EXPOSED TO ACCEPT
THE MOUNTING SCREWS.
NOTE: The four tapped holes on the front of the mounting plate must be exposed to
accept the TPS-6X-DSW mounting screws. These holes are found beneath the
drywall just outside the four corners of the opening and made by cutting out the
drywall. Refer to the NOTE in “Mounted View with Cover Plate” illustration above.
Installation Guide – DOC. 6778A Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW •5

Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW
Installation
Complete the installation by either installing the wall mount docking station, leaving
the hole open (if permitted by local building codes) or installing the optional cover
plate with the included #06-32 x 1-1/2” screws. If the TPS-6X-DSW is to be
installed, refer to the latest revision of the TPS-6X-DSW Operations and Installation
Guide (Doc. 6708) for installation instructions. The document is available from the
Crestron®website (www.crestron.com/manuals). Refer also to the comprehensive
illustration below.
TPS-6X-DSW Mounting – Exploded View
PMK-6X-DSW
TPS-6X-DSW
DRYWALL
SCREWS(4) #06-32 X 1 1/2"
PAN HEAD(2007254 )
6 •Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW Installation Guide – DOC. 6778A

Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW
Other Mounting Option Accessories
If too much of the mounting plate is exposed after the drywall is cut, you may need
to patch the area. Crestron provides the following accessories:
• MMK-6X-DSW (Doc. 6779) - for larger repairs and to fill in larger
irregularities around the opening (requires plastering).
• TMK-6X-DSW (Doc. 6780) - for smaller repairs and to provide a smooth
edge at the opening. This option provides a finished appearance and is
preferred when wallpaper is hung.
The manuals for the MMK-6X-DSW and TMK-6X-DSW are available from the
Crestron website.
Installation Guide – DOC. 6778A Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW •7

Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW
Resources
Industry Compliance
As of the date of manufacture, the PMK-6X-DSW has been tested and found to
comply with specifications for CE marking.
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron website (www.crestron.com/manuals). This link will provide a list of
product manuals arranged in alphabetical order by model number.
List of Related Reference Documents
DOCUMENT TITLE
MMK-6X-DSW Mud Mount Kits for the TPS-6X-DSW
TMK-6X-DSW Trim Ring Mount Kits for the TPS-6X-DSW
TPS-6X-DSW Wall Mount Docking Assembly for TPS-6X
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling Crestron at 1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time
users will need to establish a user account to fully benefit from all available features.
Future Updates
As Crestron improves functions, adds new features and extends the capabilities of
the PMK-6X-DSW, additional information may be made available as manual
updates. These updates are solely electronic and serve as intermediary supplements
prior to the release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
8 •Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW Installation Guide – DOC. 6778A