Crestron UCA-SMK-UC2 User manual

TheCrestron®UCA-SMK-UC2andUCA-SMKR-UC2-3areswivelmount
accessories for CrestronFlex TabletopSmallRoom ConferenceSystems.
Theyenabletabletopconferencedevicemountingwithupto170°rotation
for optimalpositioning.TheUCA-SMK-UC2is designedfor mountingthe
UC-MM30series tabletopconferencedevice.TheUCA-SMKR-UC2-3is
designedfor theUC-MMX30series tabletopconferencedeviceandhas
thefollowingadditionalfeatures:
lRetracts theinstalledUSB-AtoMicroUSB-Bcable,HDMI®cable,and
USB-C®cable.
lAbovethetable,theUSB-A,HDMI,andUSB-Ccables supportBring
Your OwnDevice(BYOD)connectivityfor thetabletopconference
device.
lBelowthetable,theMicro USB-B,HDMI,andUSB-Ccables connectto
theUC-PR which is includedwiththeUC-MMX30.
TheUCA-SMK-UC2andUCA-SMKR-UC2-3havesimilar installation
instructions.For simplicitywithinthis guide,theterm"swivelmount
accessory"is usedexceptwhereotherwisenoted.
IntheBox
1UCA-SMK-UC2or UCA-SMKR-UC2-3SwivelMount
Accessory
Additional Items
1 Lockingringwith screws (4519116)
1 CutoutTemplate(4532125)
1 Allenwrench,3/32in.(2036829)
UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems
1

Installthe SwivelMount Accessory
Installtheswivelmountaccessoryonanyflat,levelsurfacewitha
thickness of 1/2in.(13mm)minimum to1-1/4in.(32mm)maximum.The
LAN andUSBcables for theUC-MM30or UC-MMX30tabletop
conferencedeviceroutethroughthecablecover oftheswivelmount
accessory,passingbeneath themountingsurfacefor acompletelyhidden
appearance.Refer totheInstalltheSwivelMountAccessory sectionfor
moreinformation.
UCA-SMK-UC2
UCA-SMKR-UC2-3
2
UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems

MounttheSwivel MountAccessory
Whendeterminingthemountinglocation,consider whereusers willbe
seatedandtheir proximity totheswivelmount accessory andthe
tabletopconferencingsystem.Themountinglocationmust
accommodatea170°swivelrange.Additionally,theUCA-SMKR-UC2-3
requiresa 27.42in.(696 mm)clearancefor thecableretractor bodybelow
thetable.
A4 in.holesaw,ajigsaw, a3/32in.Allen wrench (included),andthecutout
template(included)arerequiredtomounttheswivelmountaccessory.
1. Securethecutouttemplatetothemountinglocation.Thenotchon the
templateandtheswivelmountaccessoryindicates thefront ofthe
swivelmountaccessory.
2. Useaholesaw(not included)todrilla4 in.holeinthetable.
3. Useajigsaw(notincluded)tocut thefrontnotch.
4. Insert thebody of theswivelmountaccessoryintothemountinghole.
Matchthenotchon thefrontoftheswivelmountaccessorywiththe
notchinthetable.
5. Beneaththetable,twisttheincludedlockingringontothebodyofthe
swivelmountaccessory.
NOTES:
lMakesurethesurfaceof thelockingringlabeledTOPfaces the
bottomof thetable.
lLeavea1/8in.(4 mm)gapbetween thelocking ringandthe
bottomof thetable.
3
UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems

6. Securethelockingringtothebottomof thetable.Usea3/32in.Allen
wrench (included)totighten thethreesetscrews includedwith the
lockingring.
4
UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems

Connect andDockthe Tabletop
ConferenceDevice
MaketheUSBandLANconnections to thetabletopconferencedevice
beforedockingitto theswivelmountaccessory,as thedeviceblocks
access tothecablecover pass-throughholes.Oncedocked,continue
makingconnections tothetabletopconferencedevice.
TomaketheUSBandLAN connections tothetabletopconferencedevice:
1. RoutetheUSBandLAN cables alongtheoutsideoftheswivelmount
bodythroughcablecover pass-throughholes.
2. Connect theUSBandLANcables tothetabletopconferencedevice.
3. UsetheoptionalcableclamptoholdtheUSBandLAN cables in place.
5
UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems

UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems
Dock the Tabletop ConferenceDevice
Dockthetabletopconferencedevicetotheswivelmountaccessory.
1. Positionthetabletopconferencedeviceabovetheswivelmountsurface.
2. Slidethetabletopconferencedeviceontotheswivelmountaccessory,movingthedevicebacktofront.Thedevicemustengagewiththelatchatthe
back of theswivelmountaccessory.
3. Gentlypress thetabletopconferencedeviceto engageitwiththeswivelmountaccessory.
6

Continue Connecting theTabletop Device
Connect theUSBandLAN cables tothesourcedevices.
For theUCA-SMKR-UC2-3,connect theBYOD andUC-PRconnections.
For details on thetabletopdeviceconnections,refer tothetabletop
conferencedeviceQuickStart.
UC-MM30-TandUC-MM30-T-I(Doc.8836)
UC-MM30-TAandUC-MM30-TA-I(Doc.8711)
UC-MM30-Z andUC-MM30-Z-I (Doc.8837)
UC-MMX30-TandUC-MMX30-T-I (Doc.8881)
UC-MMX30-Z andUC-MMX30-Z-I (Doc.8880)
Lock theTabletop ConferenceDevice
Tolockthetabletopconferencedevicetotheswivelmountaccessory,
locatethereleasebuttonandthesecurityscrew.Usea3/23in.Allen
wrench (included)totightenthesecurityscrew.Tenclockwiserevolutions
locks thereleasebutton.
Unlock theTabletop Conference Device
If thetabletopconferencedeviceis lockedto theswivelmountaccessory,
locatethesecurityscrewandusea3/32in.Allenwrenchtoreleasethe
securityscrew.Ten counterclockwiserevolutions unlocks thesecurity
screw.Press thereleasebuttontodisengagethelatch ontheswivel
mount accessory,andslidethetabletopconferencedeviceoff of the
swivelmountaccessory.
UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems
7

Visit theProduct Page
ScantheQRcodetovisittheproductpage.
UCA-SMK-UC2
www.crestron.com/model/6511567
UCA-SMKR-UC2-3
www.crestron.com/model/6511362
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All otherlanguages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) undera limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
CertainCrestron products containopen source software. Forspecificinformation, visit
www.crestron.com/opensource.
Crestron and the Crestron logo are eithertrademarks orregistered trademarks of
Crestron Electronics, Inc. inthe United States and/or othercountries. HDMI the HDMI
logo are eithertrademarks orregistered trademarks of HDMI Licensing LLC inthe
United States and/or other countries. USB-C is eithera trademark orregistered
trademark of USBImplementers Forum, Inc. inthe United States and/or other countries.
Othertrademarks, registered trademarks, and trade names may be used inthis
document toreferto either the entities claiming the marks and names or theirproducts.
Crestron disclaims any proprietary interest in the marks and names of others. Crestron
is not responsible for errors in typography or photography.
©2021Crestron Electronics, Inc.
Doc. 8786B
02/18/21
8
UCA-SMK-UC2 and UCA-SMKR-UC2-3 QuickStart
Swivel MountAccessory for Crestron Flex Tabletop Small Room ConferenceSystems