Crestron TST-600-DSW-PMK User manual

Crestron TST-600-DSW-PMK
Pre-Construction Wall Mount Kit
for TST-600-DSW
Installation Guide

This document was prepared and written by the Technical Documentation department at:
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States
and/or other countries. Other trademarks, registered trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
©2012 Crestron Electronics, Inc.

Crestron TST-600-DSW-PMK Pre-Construction Wall Mount Kit
Installation Guide – DOC. 7453A Contents •i
Contents
Pre-Construction Wall Mount Kit for TST-600-DSW: TST-600-DSW-PMK 1
Description................................................................................................................................. 1
Setup .......................................................................................................................................... 4
Supplied Hardware ......................................................................................................4
Mounting ..................................................................................................................... 4
Installation ................................................................................................................... 7
Other Mounting Option Accessories ...........................................................................7
Resources...................................................................................................................................8
Reference Documents..................................................................................................8
Further Inquiries .......................................................................................................... 8
Future Updates ............................................................................................................ 8
Return and Warranty Policies ....................................................................................................9
Merchandise Returns / Repair Service ........................................................................ 9
Crestron Limited Warranty.......................................................................................... 9
.

Crestron TST-600-DSW-PMK Pre-Construction Wall Mount Kit
Installation Guide – DOC. 7453A Pre-Construction Wall Mount Kit for TST-600-DSW: TST-600-DSW-PMK •1
Pre-Construction Wall Mount Kit
for TST-600-DSW:
TST-600-DSW-PMK
Description
The TST-600-DSW-PMK provides a simple solution for installing the Crestron®
TST-600-DSW Wall Mount Docking Station (or TST-600-WALL Wall Mount
Wireless Touch Screen) in a typical framed wall. Designed for pre-construction
applications, the TST-600-DSW-PMK permits fastening to a stud of a framed wall
prior to installation of drywall. A blank cover plate is included to provide a
temporary cover for the opening during construction.
For custom placement of the TST-600-DSW without a stud, use the
TST-600-DSW-WMKT or TST-600-DSW-WMKM.
The TST-600-DSW-PMK includes a 12-inch long, 18 AWG jumper wire to secure
docking station cabling prior to drywall installation and to avoid damaging the cables
when the opening is routed.
NOTE: If mounting in a material other than drywall (for example, wood lectern,
concrete or rock) use the cutout template, available in the post-construction kit
TST-600-DSW-WMKM or TST-600-DSW-WMKT. For concrete and rock
installations, allow for proper ventilation before mounting the TST-600-DSW.
NOTE: This mounting kit is to be used only with the TST-600-DSW Wall Mount
Docking Station.

Pre-Construction Wall Mount Kit Crestron TST-600-DSW-PMK
2•Pre-Construction Wall Mount Kit for TST-600-DSW: TST-600-DSW-PMK Installation Guide – DOC. 7453A
The dimensions of the TST-600-DSW-PMK are shown in the following illustrations.
TST-600-DSW-PMK Overall Dimensions (1 of 2)
#06-32 Tapped Hole in Each Corner
Secure 18 AWG Jumper Wire
in Notch to Hang Cables
Away From Cutting Tools
For Drywall Screws (Not Included)
For Drywall Nails (Not Included)
0.56 in
(15 mm)
8.82 in
(225 mm)
11.90 in
(303 mm)
8.00 in
(204 mm)
0.06 in
(2 mm)
6.35 in
(162 mm)

Crestron TST-600-DSW-PMK Pre-Construction Wall Mount Kit
Installation Guide – DOC. 7453A Pre-Construction Wall Mount Kit for TST-600-DSW: TST-600-DSW-PMK •3
TST-600-DSW-PMK Overall Dimensions (2 of 2)
1/8 in
(4 mm)
3/16 in
(5 mm)
5 13/16 in
(148 mm)
1/2 in
(13 mm) 6 in
(152 mm)
7 3/4 in
(196 mm)
6 3/4 in
(171 mm)
5 in
(127 mm)
6 3/16 in
(158 mm)
6 1/8 in
(156 mm)
1/2 in
(13 mm)
8 15/16 in
(226 mm)
TST-600-DSW-PMK Overall Dimensions (Cover Plate)
5.85 in
(149 mm)
4.16 in
(106 mm)
0.02 in
(1 mm)

Pre-Construction Wall Mount Kit Crestron TST-600-DSW-PMK
4•Pre-Construction Wall Mount Kit for TST-600-DSW: TST-600-DSW-PMK Installation Guide – DOC. 7453A
Setup
Supplied Hardware
The hardware supplied with the TST-600-DSW-PMK is listed in the following table.
Supplied Hardware for the TST-600-DSW-PMK
DESCRIPTION PART NUMBER QUANTITY
Metal, Plate, Pre-Construction 4507464 1
Metal, Plate, Blank, Cover 2022825 1
Screw, #06-32 x 1-1/2”, Pan, Phil 2007254 4
Wire, Jumper, 12”, 18 AWG, Black 2007838 1
Mounting
The TST-600-DSW-PMK consists of a single metal plate, which fastens to a stud of
a framed wall prior to hanging drywall. Standard drywall nails or screws to attach the
TST-600-DSW-PMK are not included.
The plate is designed to provide the necessary support for the TST-600-DSW and
can mount on the right or left side of a stud. Confirm that the TST-600-DSW-PMK
is level before applying drywall.

Crestron TST-600-DSW-PMK Pre-Construction Wall Mount Kit
Installation Guide – DOC. 7453A Pre-Construction Wall Mount Kit for TST-600-DSW: TST-600-DSW-PMK •5
Mounting the TST-600-DSW-PMK
NOTE: Ensure plate
is level when mounted
TST-600-DSW-PMK
(4507464)
CAUTION: Allow an air gap of at least 12 inches (305 mm) in the wall cavity
above and below the TST-600-DSW for heat dissipation.
After drywall is positioned, a rectangular opening must be made. Position the
opening to expose the #06-32 tapped holes near the four corners of the opening in the
plate.
NOTE: Cut the drywall along the inside edge of the front of the mounting plate.
The labels on the front of the mounting plate indicate the perimeter of the opening
that should be cut. Refer to NOTE in the illustration above.

Pre-Construction Wall Mount Kit Crestron TST-600-DSW-PMK
6•Pre-Construction Wall Mount Kit for TST-600-DSW: TST-600-DSW-PMK Installation Guide – DOC. 7453A
Mounted View with Cover Plate
Screws (4)
#06-32 x 1 1/2” Pan,
(2007254)
NOTE: Mounting plate is to be
covered with drywall and then
the cutout made around the
inside of the opening.
Cover Plate (2022825)
to cover cutout in drywall
before TST-600-DSW is
installed (may be required
by local building codes)
NOTE: Be sure to leave
the four tapped holes
on the front of the plate
exposed to accept the
mounting screws.
NOTE: The four tapped holes on the front of the mounting plate must be exposed to
accept the TST-600-DSW mounting screws. These holes are found along the top and
bottom of the opening made by cutting out the drywall. Refer to NOTEs in the
illustration above.