CrimeStopper FS-60 User manual

1
FS-60
2-WayOLEDRemote
PagingAlarm& EngineStartingSystem
OPERATION INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS on yourchoiceofthe OLEDRemote PagingAlarm&RemoteEngine
Starting System with3D GraphicsbyCrimestopperSecurityProductsInc.
CONTACTINFORMATION:
TECHNICALSUPPORT(800)-998-6880
Monday -Friday8:00am-4:30pmPacific
Website: www.crimestopper.com
E-mail: [e-mail]
CRIMESTOPPER SECURITYPRODUCTSINC.
1770 S.TAPOSTREET
SIMIVALLEY,CA.93063 REV. A7.2009
ThisdevicecomplieswithFCC Rulespart15.Operationissubjecttothe
followingtwoconditions:1)Thisdevicemaynotcauseinterference,and(2)this
devicemustacceptanyinterferencethatmaybereceived,including
interferencethatmaycauseundesiredoperation.Themanufacturerisnot
responsible foranyradioorTVinterferencecausedbyunauthorized
modificationtothisequipment. Suchmodificationcouldvoid the user's authority
tooperatetheequipment.

2
Lift sidecover
forUSB PLUG
ChargingBattery
THEREMOTECONTROLS
1-WAY - SIDEKICK REMOTE:
The1-Waysidekickremoteaddsflexibilitytoyoursystem.Youcan have the convenience of
operating yoursystemwithoutneeding tocarrythe largerpagerremote.TheSidekick
remotehaslessrange andoffersallofthesameoperationfeaturesexceptforpage-back
confirmation.The1-WaySidekickRemoteusestwoCR-2025Lithium3Volt Batteries.
2-WAY - TOUCH SCREENPAGER / REMOTECONTROL:
The 2-WayOLEDpagerremotecontrolis used tosend and receiveinformationtoand from
thevehicle.Thevehiclewill confirmremotecommandsbytransmitting HighFrequencyFM
signalstoyourpageroverlongdistances. Yourrangewillvarydependingon location,
terrain,and localRFnoise/interference.This systemis notguaranteedtopage you ifyou
arebehindconcretewalls, underground, inalargestructure, orinanarea withhigh levels of
electronic interference.Handlethepager/remotewithcare.TheLCD displayand/orthe
electronicsmaybedamaged if subjected toabuse.
TheOLED remotecontrolwillconfirmeverythingonthedisplayalong withvoiceand
vibration.The voiceandvibration canbe turnedON orOFF thruthemenuchoices.
•PressSideScroll-Wheelto display ALARMStatusandexitMenu Options
ARM/ LOCK DISARM/ UNLOCK
STARTTRUNK
▲
◄Scroll -Wheel
▼

3
•ScrollScroll-Wheel“UP”to display theFollowingscreens
•ScrollScroll-Wheel“DOWN”to displaytheFollowingscreens
PowerOFF Button: Scroll-WheelDown
Thisturnsthe PowerOff. The Remotewillnotreceivesignals fromvehicleuntilbutton #4is
pressed about 4seconds.The screen will changecolors, andthen showStart-UpScreen.
Arming/ Locking:
Pressthe LockButton on the remotecontrol. The Systemwill armandconfirmwithonesiren
andhornchirp, one parklightsflash,and the LEDwillbegintoflash slowly.Powerlockswill
lock(ifequipped).Thestarterdisablecircuitwillturnon.The 2-WayLCD Pagerwill give
voiceconfirmation “SystemArmed” whiledisplayingaLockingsymbol. Afterashortdelay,
thesystemwillbe completelyarmed.
NOTE: The sirenandhornchirpsareprogrammableON orOFF (option#4).
OpenDoorAlert/ Bypass:
Uponarming,thesystemwillwarnyouifadoor,hoodortrunkis left open.Thesystemwill
chirpand flashtheparkinglights4timestowarnyouofaproblem. Thesystemwill waitup
to45 seconds(programmable0,15,30, 45 seconds)forthe domelighttoturnoff. Theopen
zone will automatically be bypassed untilclosed.Thealarmwill continuetoprotectall other
zones.
CarFinderMode:
Whenthealarmsystemisarmed, presstheLockButton. Thesiren, hornandlightswillflash
6times.This is usefulinalarge parkinglottohelpfindyourcar.

4
Disarming / Unlocking:
PresstheUnlockButton on theremotecontrol.TheSystemwilldisarmandconfirmwithtwo
chirps,twolightflashes,andtheLEDwill turnoff. Powerlockswillunlockand Interior
Domelightwill turnon(ifinstalledwiththeseoptionalfeatures).The2-WayLCD Pagerwill
confirmwith “SystemDisarmed” whiledisplayinganUnlocksymbol.
Driver’sDoorPriorityUnlock:Optional connectionrequired
Thisoptionseparatesunlockofthedriver’sdoorfromthepassengerdoorswiththeremote
control. Thereare2choicesof operation.
•Default =PressandholdtheUnlockButton for2secondstounlockalldoors.
•Pressthe UnlockButton2timestounlockall doors.
Thisis RemoteChannel2output (Option #10).Thisoutputcanalsobe programmedfor
otherauxiliaryfunctions, consult yourinstaller.
SilentArming: Scroll-WheelDown
ToArmwithoutchirps,pressthe SilentArmbutton # 1.The 2-WayLCD
Pagerwillconfirmwith “SystemArmed”.
SilentDisarming: Scroll-WheelDown
ToDisarmwithout chirps, presstheSilent Disarmbutton#2.
The2-WayLCD Pagerwill confirmwith “SystemDisarmed”.
ArmwithoutShockSensorZone: Scroll-WheelDown
Toarmthe systemwithout theshocksensorzone, pressbutton #3.
The2-WayLCD Pagerwill confirmwith “SystemArmed”.
PanicMode:IgnitionKeyOFF Scroll-WheelDown
Tosoundthe alarminan emergencysituationortodrawattention to
yourvehicle,press Button#4untilthesiren/hornsounds.Thealarm
willsoundfor30 seconds.Pressthe LockorUnlockButtontoreset
panic mode.
Note: On1-WaySidekickremote, pressthe Buttonsatthe
sametime. Plus

5
ManualArmingMode:
Thealarmsystemcan beManuallyArmed andDisarmedwithouttheremotecontrol.The
doorentrywillchangetoa20seconddelaytoallowdisarmwithoutsoundingalarm.This is
usefulifyoudon’t havearemotecontrolorgoswimming.
ToActivateManualMode:
1.TurnIgnitionKeyoff.
2.PressValetOverrideButton 3timesandexitvehicle.
3.Thesystemwill arm10 secondsafterclosingthedoor.
4.DisarmbyIgnitionOnandpressValet Overridebutton 4seconds.
ValetMode:SolidBlueLED
ValetMode isdisablesthe Alarmand RemoteEngine
Starting forvehicleservicing.The alarmsystemmust
bedisarmed toenterValetMode.
•ToActivateValetModeManually: Turnthe
ignition onandpressthe Valet/Override button
(about6seconds)until theLEDturnson solid.
Repeat the processtoexit VALETMode (you hear(2)sirenchirps).
•ToActivateValetwiththeremote, pressthe remote’sLockandUnlockbutton
(about6seconds). Repeatthis step toexitValetMode withtheremotecontrol.
Emergency Override(DisarmwithoutRemote)
If you havelostthe transmitteroritstopsworkingforanyreasonand theAlarmis armed,
youwillhavetodisarmthesystemmanually.Open thedoorwiththekey[alarmwill sound],
turntheignitionon,andpresstheValet/Overridebutton forabout5seconds.The Alarm
willdisarmandallowyou tousethe vehicleuntilyoucan repair/ replacetheremote.
IgnitionControlledDoorLocks:(Option#2)
Thedoorswill automaticallylockwhen theignitionisturnedonandwill unlockwhenthe
ignition is turnedoff. This featurecanbe programmedon,off,tolockthe doorsonlyor
unlockthedoorsonly. Doorswillnotlockif theyareopentopreventlocking the keysin.
AlarmTriggers:
If thereisanintrusion intothevehicle,ahardimpacttothe bodyor
theignitionis turned on;thealarmwill soundandflashthelightsfor
30seconds.If adoorisleft open afteranintrusion then the unitwill
cycleonceandcontinue toprotecttheotherun-tamperedor
unopened zones.The LCD remotewillkeepadetailed recordofthe
triggerzone,timeand dateand vehiclenumber(up to4trigger
violations)

6
PriorintrusionAlert:
Thissystemwillnotifyyouifthealarmwastriggered whileyouwereaway. Upondisarming,
therewillbefoursiren chirpsinsteadof the twonormaldisarmchirps.Checkyourvehicle
foranysignsofabreakinortampering.
TheBlueStatusLED willflashthetriggerzonenumberasfollows:
2LEDFlashes =Sensor#1
3LEDFlashes =Sensor#2
4LEDFlashes =Trunk
5LEDFlashes =Door
6LEDFlashes =Hood
7LEDFlashes =Ignition
LCD RemotePaging/ ZoneViolations:
Whenthe systemistriggered,thealarmsendsapaging signaltotheremote.If youare
withinrange,youwill receiveapaging signalthatwilldisplayofwhatcausedthe zone
violation.The 2-WayLCD Pagerwillalsovibrateandgivevoiceconfirmationof “Door,
Hood, Trunk, Ignition orSensorTrigger” tonotifyyouthevehiclehasbeentamperedwith.
TheLCDremotewillkeepadetailedrecordofthetriggerzone,timeand date(up to4
triggerviolations).
Pre-WarningShock Protection:
ThePre-Warning(Warn-A-Way)featurewill activatewhen alow-levelLightShockor
vibration isdetectedbythe system’sshocksensor.Thealarmwill chirpthe siren6timesto
helpdeteranyfurthertamperingwiththe vehicle.You willreceiveapagingsignalthatwill
displayanButtonofahammerhitting thevehicle.The 2-WayLCD Pagerwill alsovibrate
andgivevoiceconfirmationof “SensorWarning” tonotifyyou the vehiclehasbeen
tampered with.
PassiveArmingMode:(Option#6-3)
Passive(automatic)Arming occurs30secondsaftertheignitionisturnedoff andthe last
dooris closed.Upon closingthelastdoor,theLED willbeflashing rapidlytoconfirmpassive
countdown.Ifadooris reopenedwithinthe30-secondperiod,the LEDwillturnOFF as
countdownstopsand beginflashingagainwhenthedooris closed. Passive arming provides
failsafeprotectionincaseyouforgettoarmthesystem.
PassiveLocking: (Option#6-2)
Thesystemcanbeprogrammedtopassivelylockthedoorswhen the systempassively arms.
The defaultsettingis OFFbecausepassivelockingincreasestheriskoflockingthekeysin
thevehiclewhen the systemarms/lockspassively, withoutpressingtheremote.
Diagnosticswill resetwhentheIgnitionis
turnedon orwhenthesystemisre-armed.

7
ArmingReminder:(Option#6-1=ON, #6-4=OFF)
If PassiveArming is turnedoff, thereisaremindertoarmthesystem15 secondsafter
closing the last door. Thesystemwillchirp4timestoremind youtoarmthe alarm.
Active Rearm:(Option#5-4)
ActiveRearmingmeansthatthesystemwillre-armitself30secondsafterbeingdisarmed
withthetransmitterifadoorhasnotyetbeenopened.Thisishandyifthevehicleis
accidentallydisarmed(viathe transmitterinyourpocket)withoutyouknowingit.This
featurecanalsobe turnedoffinprogramming.
Auto Rearm:FailsafeProtection(Option #5-2withLock, #5-3withoutLock)
Afterdisarming systemandopeningandclosingadoortogetapackage,thealarmwill
rearmautomaticallyunlessthe ignition is turnedon.Thesystemcan beprogrammed to
passivelylockthe doorswithAutoRearm.
PassiveImmobilizer:(Option #7-2)
ThesystemincludesaPassiveImmobilizertoactivatetheStarterDisablerelaywithout
armingthe alarm.TheLEDwill flashand the starterdisablewill activate30secondsafter
turningtheignitionoff. Thismayqualifyforaninsurancediscount.
Trunk/ HatchPop-RemoteChannel1(Option#9)
Thisfeatureisdesigned tointerfacewithexisting Factorypowertrunkorpowerhatch
releasesystemsandmayrequireadditionalpartsand/orlaborcharges.Toactivate,press
andholdthe TrunkButton for3seconds.The2-WayLCDremotewillconfirmactivation with
atrunkButton.If the systemis armed,itwill automaticallybypassthe trunkandshock
sensortriggerzonesuntil10 secondsafterclosing.Thesystemcanalsobeprogrammedto
disarmwithTrunkPop. Note: Thisoutputcan alsobeprogrammed tooperateother
accessoriesordevices,consult yourinstaller.
RemoteChannels2, 3, 4,5, and6(Optional,Requiresspecial programming)
Theseoutputsareprogrammableforavarietyoffunctions.Thedefaultsettingsarefor
standardfeatureslikedomelight, hornhonkandremotestarting.Theseoutputsare
programmable formomentary, latched,ortimed.Theseoutputscan onlybeprogrammedfor
onefunction.
Channel 2= then ………….. Option#10
Channel 3= then …………..Option#11
Channel 4= then ………… Option#12
Channel 5= plus ……….. Option#13
Channel 6= plus ………... Option#14
Consultyourinstallerforavailableoptions.

8
ButtonBeeps: Scroll-WheelDown
Pressbutton#1forbeepswhenakeyispressedon remotecontrol.The
menu will showON orOFF.
VibrationandMelody: Scroll-WheelDown
Pressbutton#2forVibration ON/OFF.Pressbutton#2asecondtime
forVoiceConfirmationON/OFF.The menu will showONorOFF foreach
selection.
Button Lock: Scroll-WheelDown
Topreventaccidentaloperation of alarmsystem,theremotecontrolhasa
buttonlockfunction.Pressing anyremotebuttonwill displaytheButton
LockScreen.
•ToactivateButton Lock, pressbutton#3
•Tocancel, press (Lock +Unlock)
RFTestMode: ForFactoryUse
VehicleStatusCheck: Scroll-WheelDown
TocheckthevehicleStatus,pressbutton #1.Theremotecontrolwill
send signaltovehicletoreportalarmstatusonLCDdisplay.
VehicleTemperatureCheck: Scroll-WheelDown
Tocheckthevehicletemperature,pressbutton#2.Theremotecontrol
willsend signaltovehicletoreporttemperatureon LCD display.
BatteryVoltageCheck: Scroll-WheelDown
Tocheckthevehiclebatteryvoltage, pressbutton #3.The remotecontrolwill send signalto
vehicletoreport batteryvoltageon LCD display.
TriggerCheck: Scroll-WheelDown
Tocheckthememoryofalarmstriggerspressbutton#4.The LCD remotewill keep a
detailed recordofthe triggerzone,timeand dateand vehiclenumber(upto4trigger
violations).
VehicleName: Scroll-WheelDown
Youcanrenameanyvehicle(up to4)onthe display.Pressbutton#for
vehicleyouwishtorename.UsetheScroll-Wheeltomakechanges.
Pressbutton#3(Set)tosaveandexit.

9
ParkingTimer:
Thisis aparkingmeteralarmreminder.Enterthe
amountoftimeneededusing theScroll-Wheel.Press
button #3(Set)tosaveand exit.Theremotewilldisplay
aclockIconwhencountingdown.
ParkAreaLocation:
Thisallowsyouto enterthelocation ofyourparkedvehicleinaparking
lotorparking garage.Usemenu onrighttoenterlocation.Pressbutton
#3tosaveand exit.
PowerSaveMode:
Thismodesavesbatterypowerbyturningoff allmenuscreens.Pressing
anyremotebuttonwilldisplaythe PowerSaveLockScreen.
•ToactivatePowerSave, pressbutton#3
•Tocancel, press (Lock +Unlock)
LogoforVehicle: Scroll-WheelUP
TochangethevehicledisplayLogo,pressbutton#4.PresstheDown
Arrowtoscrollthruthe choices.Tosavetheselection,presstheScroll
WheelIN.
SettingDateandTime: Scroll-WheelUP
Tochange thedateand time,pressbutton #1.TheLCD displaywill
showyear,month,day,hoursand minutes.UseScroll-Wheelto
IncreaseorDecreasetime. Pressbutton#1or#2toscrollleftorright.
Tosaveselection,pressbutton#3(Set).The DateandTimewill
displayon top of LCD screen.

10
ALARMCLOCK: Scroll-WheelUP
TosetAlarmClock,press button#2. Enterthetimeof alarm(in24 hour)
andpressbutton#1(Enable)thenbutton press#3 (Set).Theremote
willdisplaywill displayanalarmIcononLCD display.
To setAlarmTime, Pressbutton#1then#3
To cancel AlarmTime, Pressbutton#2then#3
DailyStart: Scroll-WheelUP
Thisallowsyoutohavevehicletoautomaticallystartthe sametime
everyday.Toactivatedaily start, pressbutton #3.Entertheamountof
timeand button #1(Enable)thenpressbutton # 3(Set).The remote will
displaywill displaya24 hourClockIcon on LCDdisplay.
To setDailyStart,Press button #1then#3
To cancel DailyStart,Press button #2then#3
Count DownStartTimer: Scroll-WheelUP
Thisisacountdowntimertostartyourvehicle.Tosettimer,press
button#4.Enterthe hoursandminutesandpressbutton#1(Enable)
thenbutton press#3 (Set).Theremotewill displaywilldisplayanalarm
Icon onLCD display.
To setTimer, Pressbutton #1then#3
To cancel AlarmTime, Pressbutton#2then#3
PlayMusic: Scroll-WheelUP
Pressbutton#1toplayrecorded music.The menushownonrightwill
displaymusic options.Pressbutton#4toexit.
SystemDemo:
Pressbutton #2forDemoofremotecontroldisplayfunctions.Press
button#4toexit.
TriggerRecord:
Tocheckthememoryof alarmstriggerspressbutton #3.TheLCD
remotewillkeepadetailedrecordof the triggerzone,timeand dateand
vehiclenumber(up to4triggerviolations).
FactoryTest:
Thiswillrunthruatesttodisplayallmenusinsequence.