Criterion BRUNSWICK 1800 Installation guide

- Please follow these assembly instructions as it will save you time, make
assembly easier and prevent possible damage to your new unit.
- Correct assembly is your responsibility.
- We strongly recommend that the unit is assembled on a soft surface such
as carpet or blanket.
as power tools can strip threads if over tightened.
- When moving this furniture item, always carry the unit. Dragging or
sliding the unit could damage the unit and the floor surface.
Assembly Instruction Manual
MODEL NO.: BRUNSWICK1800
- We suggest the use of hand tools only to tighten all screws and fittings,
800
360
390
40
1700
345
470
180
500
360
1800
60
220

PART LIST
1 x 1pc 2 x 1pc 3 x 1pc 4 x 1pc 5 x 1pc
6 x 1pc 7 x 1pc 8 x 1pc 9 x 2pcs 10 x 1pc
11 x 1pc 12 x 1pc 13 x 1pc 14 x 2pcs 15 x 2pcs
16 x 2pcs 17 x 2pcs 18 x 2pcs 19 x 2pcs 20 x 2pcs
21 x 3pcs 28 x 8pcs 29 x 4pcs 30 x 30pcs 31 x 30pcs
32 x 30pcs 34 x 32pcs 35 x 4pcs
33 x 30pcs 36 x 4pcs
37 x 2pcs 38 x 2pcs 39 x 2pcs 40 x 2pcs

OVERVIEW
1
2
3
4
5
67
8
9
9
10
11
12
13
14
14
15
15
16
17
18
19
20
21

STEP 1
STEP 2
31 x 6pcs
31 x 6pcs
30 x 6pcs
32 x 6pcs
30
32
arrowhead on cam points
toward to the hole on the
panel edge.
20
20
20
20
21
21
21
Screw Driver
Required
Screw Driver
Required
Set aside after this step is completed.

STEP 3
STEP 4
33 x 18pcs
31 x 2pcs
30 x 2pcs
34 x 4pcs
37 x 2pcs
1
34
37
Screw Driver
Required
Screw Driver
Required
30
31
33
14
15
19
16
17
18
33
Repeat this step to assemble other
drawer compartment

STEP 5
STEP 6
8
13
30 x 2pcs
32 x 2pcs
31 x 2pcs
arrowhead on cam points
toward to the hole on the
panel edge.
30 x 4pcs
32 x 4pcs
31 x 4pcs
30 x 2pcs
31
32 arrowhead on cam points
toward to the hole on the
panel edge.
5
6
8
Screw Driver
Required
Screw Driver
Required

STEP 7
STEP 8
30 x 4pcs
32 x 4pcs
31 x 4pcs
arrowhead on cam points
toward to the hole on the
panel edge.
30 x 4pcs
32 x 4pcs
31 x 4pcs
30
5
6
1
1
31
32
arrowhead on cam points
toward to the hole on the
panel edge.
3
4
Screw Driver
Required
Screw Driver
Required
30
31
32

STEP 9
STEP 10
2
7
3
4
33
32
30 x 8pcs
31 x 8pcs
30
31
33 x 10pcs
32 x 10pcs
Screw Driver
Required
Assembled
in STEP2

STEP 11
STEP 12
34 x 24pcs 34
29 x 4pcs
28 x 8pcs
28
10
11

STEP 13
STEP 14
9
9
35 x 4pcs
36 x 4pcs
35
36
34 x 4pcs
Screw Driver
Required
Screw Driver
Required
34

WALL
NOTE: For gyprock walls
ensure you locate the
studs, or use appropriate
to the wall. (also see Step 16)
WALL
Use a screw driver to
fasten the screws
(Part 33) into the wall.
STEP 15
STEP 16
39 x 2pcs
39
33 x 2pcs
33
38 x 2pcs
38
1350mm

Use a screw driver to
fasten the screws
(Part 40) into the
bracket.
STEP 17
40 x 2pcs
40

SURFACE CARE INSTRUCTIONS
A liƩle care and aƩenƟon will extend the life and good looks of your furniture. Take care when using
materials which might spill, or be sharp or abrasive, on the surface of your furniture.
Normal Cleaning: For normal cleaning use a soŌ dry, clean cloth.
Glass Cleaning for Frosted Glass: Do not use glass cleaner or solvent based cleaners on glass that
has a froƐƟŶg eīect on it.
Normal Glass Cleaning: You may use normal glass cleaning products on all other types of glass. Use a
soŌnon-abrasive cloth to remove light dust andĮnger prints.
Leather, Vinyl & Speaker Cloth Cleaning: Under no circumstances should any abrasive materials be
used on these surfaces, as it will result in irreparable damage.
Do not use solvents, solvent based cleaners, scouring pads, steel wool or scrubbing brushes to clean
this furniture item.
Only use a slightly damp, soŌ clean cloth on this surface if cleaning is needed. Do not scrub.
CAUTION
As with all furniture, this unit should not be exposed to direct sunlight, extreme temperatures or
moisture, as this can result in irreparable damage. Do not use it in any other way other than how it
was designed to be used.
Note: The sooner a spill or mark is cleaned, the easier it will be removed.
Customer Service
FOR ALL MISSING OR FAULTY PARTS: PLEASE RE-CHECK YOUR PACKAGING TO ENSURE THAT PARTS
ARE MISSING THEN CONTACT THE STORE YOU PURCHASED THE ITEM FROM.
THE STORE WILL NEED THE FOLLOWING INFORMATION…..
-COPY OF YOUR PURCHASE SLIP/RECEIPT
-MODEL NUMBER OF THE UNIT PURCHASED
-DESCRIPTION/PART NUMBER OF THE MISSING OR FAULTY PART
-QUANTITY OF THE PARTS NEEDED
If for whatever reason you cannot contact the store, please contact Tauris direct at
hƩp://www.rvm.com.au/contact.
Product of:
RVM Australia
11 Tamara Drive, COCKBURN CENTRAL
Perth, Western Australia 6164
PH: 08 9417 9944

WARRANTY POLICY
1. Nothing in this Warranty affects the Consumer’s rights under the Australian Consumer law. The
benefits to the Consumer under this Warranty are in addi�on to the rights and remedies of the
buyer under any Consumer Guarantees. The Australian Consumer Law requires that we confirm that:
Our goods come with guaranteesthat cannot be excluded underthe Australian Consumer Law.
You are en�tled to a replacement or refund for a major failure and for compensa�on for any other
reasonably foreseeable loss or damage. You are also en�tled to have the goods repaired or
replaced if the goods fail to be of acceptable quality.
2. Subject to Clause 1, the Seller warrants that CRITERION branded products will be free of
manufacturing defects and will perform to the Seller’s specifica�ons subject to the following clauses.
3. The benefit of this 12 Month Warranty extends only to the owner of the property in which the
Products manufactured or supplied by the Seller are installed and used by the owner for the
dura�on of the Warranty Period.
4. If within the Warranty Period a manufacturing defect is discovered in the Product, or the Product
fails to perform to the Seller’s specifica�ons as a result of some defect in material or workmanship,
then the Seller will replace or repair the goods under Warranty or refund the purchase price paid by
the consumer (except if the failure is a major failure)
5. The Warranty does not apply to Product that:
a.) Has failed due to excessive wear and tear beyond what is considered to be reasonable.
b.) Has been misused or neglected.
c.) Has been damaged accidently or by acts of God including fire and flooding.
d.) Has been used or operated contrary to opera�ng or maintenance instruc�ons.
e.) Has been damaged in transit from the Sellers store to the buyer, either by the buyer or a third
party authorised to act for the buyer.
f.) Was incorrectly assembled or installed
6. In order to make a claim under the Warranty, the Owner must provide proof of purchase in all
cases.
7. The seller will examine any returned Products and if the Seller determines that there is an
apparent defect through no fault of the Owner, the Seller will:
a.) Make note of the Owner’s contact details including the Owner’s telephone number which the
ownercan be contacted during business hours, postal address and e-mail address.
b.) Make note of the defects reported by the Owner.
c.) Take back the defec�ve goods from the owner and determine within a reasonable �me through
dialogue with the Seller whether the goods are defec�ve.