Criterion MENTOR1600L Installation guide

- Due to the weight and size of this desk it is recommended that
assembly and installation be completed by two people.
- When possible assemble the unit where it is to be used
to limit the need to move it again.
- Please follow these assembly instructions as it will save you time,
make assembly easier and prevent possible damage to your unit.
- Correct Assembly is your responsibility.
- We strongly recommend that the unit is assembled on a soft
surface such as a carpet or blanket.
- We suggest the use of hand tools only to tighten the screws
and fittings, as power tools can strip threads if over tightened.
- When moving this furniture item, always carry the unit. Dragging
or sliding the unit could damage the unit and the floor surface.
1600
1600
635
760
1400
750
400
MENTOR1600L

x 74 x 74 x 18
x 1x 1
x 2
IMPORTANT: MISSING / DAMAGED PARTS WILL NOT BE REPLACED UNLESS THE INFORMATION
REQUIRED IS SUPPLIED IN FULL
EXPLODED VIEW
TOOL REQUIRED
HARDWARE KIT
Due to the weight and size of this desk, and the associated components, it is recommended that assembly
and installation be completed by two people.
x 74
CAM STICKERS
x 24
1
2x 8
x 4

STEP1
STEP2
STEP3
x 18
x 6
x 12
arrowhead on cam points
toward to the hole on the
panel edge.
! It is Recommended that Assembly and Installation be Completed by Two People !

x 4
STEP6
x 4
STEP4
STEP5
arrowhead on cam points
toward to the hole on the
panel edge.
! It is Recommended that Assembly and Installation be Completed by Two People !

STEP8
STEP7
x 4
x 8
arrowhead on cam points
toward to the hole on the
panel edge.
! It is Recommended that Assembly and Installation be Completed by Two People !
x 4
x 8