Crossbeats APEX REGAL User manual

USER MANUAL

Over view
Back side – Charging pin & Sensors
Power On
Long press on the upper button for 3 secs to turn on
the Smartwatch.

Charging
Connect the back of the watch to the magnetic charger
available in the box. Charge the watch completely
before using.
App Installation
Scan the QR code with the mobile phone to
download the App.

Open app and set up your profile
Click on ‘Add Device’ and select “CB-REGAL”
from the list
Pairing successful
Dial Page
Long press on the screen to enter the dial selection
page, left or right stroke can switch the dial, confirm
the dial after clicking.
Menu Page
Swipe right on the dial page to enter the menu page,
once on the menu page, press the upper button twice
to switch between the menu styles, single press to
return to the main dial page.
Function Page
Connection
Watch Operation instructions
Tap the application icon on the menu page to access
the corresponding function, swipe right to return
and press the upper button alone to return to the
main dial page.

Button and touch controls
Upper button
Down button
Upper button
Down button
Press and hold the button for 5 seconds on
the main dial screen to power off the watch
Double click on the button in the menu
screen to switch between different menu
styles, click once to return to the main screen
Press the button to enter the sleep state
Long press the button bracelet to enter
the sports interface

Alarm Clock
After the watch is connected to the App, you can set
a single alarm clock, a cycle alarm clock, and up to 5
alarm clocks in the App.
Message
notification
Swipe Up
Go to the
menu page
Swipe right
Movement
data
Swipe left
Control center
Swipe Down
Watch Functions

Stopwatch
Click on the Start button to start the timing, click the
pause button to stop the timing, click the reset button
to return the timing to zero. A maximum of 10 records
can be saved.
Breath training
Blood Pressure
Female Menstrual
After the watch is connected to the App, women’s
health alert can be enabled on the app to view
women’s health information on the watch.
When entering the Blood Pressure measurement
interface,the green light at the bottom will start the
test and there will be a vibration reminder when the
measurement is completed within 30 to 60 seconds.
The measurement is based on PPG technology.
In breathing exercises, there is a choice between
1 minute and 2 minutes. Tap on the corresponding
timing to start the breath training.

Heart Rate
Blood Oxygen
Sports
Weather Forecast
When the watch is connected to the app, the weather
interface will display real-time weather temperature
and weather type.
Sports mode options: Hiking, Running, Cycling,
Mountaineering, Badminton, Yoga, Basketball, etc.
Click on the icon to start the sport.
When entering the interface of blood oxygen measure-
ment, the red light at the bottom will start the test for
30 – 60 secs and there will be a vibration reminder
when the measurement is completed. The measure-
ment is based on PPG technology.
Enter the heart rate test interface, the motor will
vibrate once after “Start measurement” and “Stop”, and
the current measurement data will be displayed.

Notifications
Setting
Music
Sleep Monitoring
The watch displays total sleep duration as well as light
and deep sleep duration on the previous night, and the
sleep screen slides up to show sleep data generated
in the last seven days.
When the watch is connected to the app, you can
control the music player – play/pause the songs,
adjust the volume and switch songs.
The settings function contains under screen display
(switch dial, brightness, duration, brightness adjust-
ment, wrist flip brightness duration), language, sound
& vibration, menu style, battery, down button setting,
time setting, QR code, system.
After the watch is connected to the app, open the
push of relevant information on the app, and the
watch can receive the corresponding message push,
and can save the latest 15 messages at most.

Time Setting
Movement Data
Display the number of steps, distance and calorie data
recorded on that day. You can scroll up the data
interface to view the number of steps in recent seven
days, and set the target number of steps, distance
and calorie in the app.
You can also manually set the time and date of the
watch by enabling or disabling the 24-hour system
on the time setting screen.
Timer
In Timer function, the system preset the common
timing duration. You can click the corresponding
duration to start the timer or click on the custom
button to set the time. Click the Start button to start
the timing, click on Pause to pause the timing, click on
reset to reset the timing to zero.

Find my Phone
Bluetooth Call
When the watch is connected to the Bluetooth of the
mobile phone, it can synchronize to the watch after
adding the common contacts in the app. You can dial
directly from the interface of the common contacts of
the watch, or use the watch to dial and control the call
of the mobile phone.
After the watch is connected to the app, click to find
the phone, the phone will ring and the watch will show
that the search is successful. If the watch and the app
is not connected, watch side will prompt show
Bluetooth Disconnect.
Control Center
Features: screen brightness adjustment, do not
disturb mode, language assistant, power saving
mode, settings, system information, find phone, call
Bluetooth switch.

[phone] [phone]
[email protected]