Crossbeats IGNITE LYT User manual

USER MANUAL

Downloading and Pairing of Smartwatch APP
Download and install APP
Scan QR code with mobile phone to download APP.
For IOS system, select App Store; and for Android system,
select Google Play Store to download and install JYouPro
JYouPro
Note: The phone must support Android 8.0 or IOS 8.0 or
above, Bluetooth 5.0 or above.
Power-on
Long press the side button for
3 seconds or plug in the
Magnetic line to charge the
Smartwatch.

Pair Smartwatch with APP
1. Click on "Scan for device"
to bind the Smartwatch.
2. Click on your device
in the device list scanned.

3. The IOS system will show a
Bluetooth pairing request and
you can click on Bluetooth
"Pairing" to confirm. Connect
it directly to Android system.
4. The Pairing is successful.

Introduction of Smartwatch functions
Power-on status
switch the menu interfaces of main screen, as the interfaces
shown in the following;
Introduction of main interface functions
After the Smartwatch and APP are first paired, the time and
date of the mobile phone will be synchronized.
Note: Press and hold the screen for 2 seconds on the main
interface to switch between multiple screen dials.
Steps
The step-counting interface shows steps. Wear the smart
bracelet on wrist, and the Smartwatch can automatically
count steps, distance and calories.

Message
You can view the content pushed by the message in the
information interface. At most Seven messages can be saved.
After Seven messages are saved, the messages displayed
before will be replaced by new messages one by one.
Note: In the information interface, press and hold for 2
seconds to delete the content.
Sleep
Wearing the Smartwatch at night to automatically judge
whether you are in the sleep state, to record deep sleep and
light sleep respectively, and to summarize the total sleep time
to help you monitor your sleep quality. The sensor can
measure your sleep quality according to the range and
frequency of wrist movements when you sleep.
Heart rate measurement
The heart rate measurement interface supports real-time
dynamic heart rate and understands your own health data.
Be sure that there is no dirt at the bottom of the heart rate
sensor when conduct measurement. Skin color, hair density,
tattoo and scar may affect the accuracy of the measuring
results, in which cases please re-measure the heart rate.
Note: The heart rate sensor shall be closely attached to skin
and well contacted with skin in measurement of heart rate.
The sensor light exposure in case of wearing bracelet too
loosely can result in inaccurate measured figures. Don’t look
steadily at the green light of sensor which may cause eye
irritation.

Blood pressure
The blood pressure shall be measured in a quiet environment
and at proper temperature. Have a rest for at least 5 minutes
before measurement. Avoid nervous, anxious and exciting
feelings; measure three times repeatedly at an interval of 2
minutes. Record the average value of readings measured three
times.
Blood oxygen
Blood oxygen saturation (Sp2) is the percentage of the amount
of Oxy hemoglobin (Hb2) which has been oxygenated in the
blood and the total amount of hemoglobin (H b, hemoglobin)
which can be oxygenated. It means the concentration of
oxygen in blood.
Note: The blood pressure and blood oxygen data are for
reference only and should not be used as a basis in medical
aspects.
Sport
Sports interface, a total of seven sports, walking, running,
cycling, skipping, badminton, basket Ball, football.
Weather
The weather page will display the current weather of today and
tomorrow. Click the weather interface to display the weather
forecast for the next 4 days.
The weather information can be obtained only after the client
is connected. If the client is disconnected for a long time, the
weather information cannot be updated

Brightness
Click the icon to select screen brightness, slide to the right to
exit and save the record.
Timer
Enter the stopwatch page, click on the icon "Start" below to
start timing, then singly click on the icon "Pause" to pause
timing, and the icon in the left is for one-key resetting.
Find mobile phone
Switch to the Find Mobile Phone interface; shake the bracelet,
and the mobile phone can make a ringtone synchronically.
Music
After connecting with the mobile phone, the Smartwatch
can control the music player of the mobile phone. When the
mobile phone plays music, you can use the Smartwatch to
control the mobile phone for playing/pausing, the previous
song and the next song.
More
Power Off
Reset
Click Settings to enter the Settings page, which displays
functions such as language, APP download, product
information, factory Settings restoration, shutdown, and restart
After clicking " √ ", the bracelet will start to shut down and go
to sleep
Click " √ " to clear all information on the bracelet and restore
it to the default factory Settings.

Remove device
For the Android mobile phone, the device can be disconnected
from your mobile phone by simply clicking on Remove device.
For Apple mobile phone after Pairing removal, you need to
click on the symbol on the right in Setting- Bluetooth, and
choose to ignore the device. As shown below:

Disclaimer
Optical sensors present on the back of the smartwatch are used to
track the health vitals, do not rely on them for medical purposes.
These smartwatches sometimes can accidentally detect non-surface
object reading due to differences in pressure on the motion sensors.
Crossbeats will not be responsible for in-app purchases made via
JYouPro.
Crossbeats does not save your personal data and is not responsible
for any data stored on JYouPro.
Battery life may vary depending on usage patterns.
The watch charging time might slightly vary depending on how much
battery percentage has been depleted and the voltage supply for a
charge.
To receive notifications, calls and other alerts ensure your data and
Bluetooth connections are stable.
Our smartwatches are water-resistant and are not suitable for diving.
Also using them in the shower with harsh chemicals can damage the
watch.
Use the smartwatch with appropriate apps to achieve the best results.

[phone]
[phone]
[email protected]