Croydex AD200200 User manual

R&R 073 R03
1
AD200200 SHOWER ROD
1410MM - 2600MM
AD220000 SHOWER ROD
1100MM - 2000MM
ALL PRODUCT DIMENSIONS DETAILED IN THIS INSTALLATION
AND MAINTENANCE MANUAL ARE APPROXIMATE
ALL ILLUSTRATIONS OF THE PRODUCT ARE FOR REFERENCE
ONLY. COMPONENTS SUPPLIED WITH INDIVIDUAL PRODUCTS
MAY DIFFER
CONTACT DETAILS
Croydex
Central Way
Andover
Hampshire
SP10 5AW
UK
Tel: [phone]
Email: [e-mail]
www.croydex.com
AD200200
AD220000

R&R 073 R03
2
SECTION 1 - INTRODUCTION
SECTION 2 - INSTALLATION
FOR INSTALLATION OF AD220000 SKIP TO STEP 2
1. Ensure the sprung loaded bracket at the end of the large
diameter tube can be compressed by approximately 10mm
whilst still being securely attached to the rod. To adjust this,
rotate the end bracket clockwise or anti-clockwise as necessary.
(See Fig. 1)
2. Ensure the rotating end bracket on the smaller diameter tube
is rotated all the way in, anti-clockwise, so as to leave space for
adjustment during installation. (See Fig. 2)
3. Unlock the tension rod by twisting anti-clockwise. Press the
sprung loaded bracket against the wall and tension the rod in
place by twisting clockwise. (See Fig. 3)
4. To add further tension to the rod, turn the rotating end bracket
clockwise until the desired tension is achieved. (See Fig. 4)
fig. 1
fig. 2
fig. 3
fig. 4
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT!
Before attempting to install this product, ensure that it fits and
will function in the desired location.
IMPORTANT!
Before attempting to install this product, ensure that any wall
surfaces that the product will contact are cleaned, dry and free
of any residue.
10mm
Large diameter tube Small diameter tube