CrucialTrak Bacs Duo Instruction manual

Components
Be sure that all components are included in the package. If an item
is missing, ask a sales representative at the store where it was
purchased, or contact us by visiting www.crucialtrak.com.
BACS Duo Mount bracket
Screw
•M4 X 25 mm, 5 pcs
•M2.5 X 6 mm, 3 pcs
Interface cable Lan cable
BD-A001 Ι Quick User Guide
Rev 1.0 Ⅰ Sep. 2018
Read this quick user guide and use the product correctly.
Refer to the manual for detailed information of the product usage and
precautions.
Standard nylon cable ties (2 pcs) Manual
Name of Each Part
Becoming familiar with the names of these products will be helpful
when installing or using the product.
Ring light
Face
camera
LCD
screen
Palm vein
sensor
ToF sensor
RFID
reader
•The effective distance of the ToF Sensor (Time of Flight:
distance imaging sensor) is up to 1 m (3.2 ft).
•This product has RFID card function. For detailed information
about using a RFID card, contact the customer service center.
BD-A001 Ι Quick User Guide
Rev 1.0 Ⅰ Sep. 2018
Copyrights © 2018 All Rights Reserved by CrucialTrak Inc.
All programs, data files, and content of BACS™ Duo and this manual
are protected by a non-disclosure agreement. Any unauthorized use,
copying, and distribution to third parties is strictly prohibited unless
otherwise specified by CrucialTrak.
If you have any suggestions or inquiries about the products of
CrucialTrak, email us at [email protected].
For troubleshooting and additional information, visit CrucialTrak’s
web page (www.crucialtrak.com).
Read this quick user guide and use the product correctly.
Refer to the manual for detailed information of the product usage and
precautions.
US HEADQUARTERS Houston, USA
820 Gessner Rd, Suite 1275, Houston, Texas 77024
Phone: [phone]
Email: [email protected]
KOREA HEADQUARTERS AND R&D CENTER
CrucialTec Pangyo, Floor 5, 62 Pangyo-ro 255, Bundang, Seongnam, Korea 13486
Phone: [phone] Fax: [phone]
Email: [email protected]

You can identify yourself with the biometrics registered in the
product. Unregistered data cannot be used for authentication.
1. The ToF sensor detects you when you come within the 1 m (3.2
ft) range of the product.
2. Use your biometric data (face and/or palm vein). The mode icon
will blink blue and recognition status will appear at the bottom
of the LCD screen.
When the product is not in use, the product will automatically
switch to standby mode.
3. Verify whether or not the authentication was successful.
•When authenticated, the alarm will ring, the mode icon will
turn green, and user ID will appear on the LCD screen.
•When authentication has failed, an alert will sound and the
mode icon will turn red on the LCD screen.
•When an error occurs, the mode icon will blink.
•Refer to CRUAMS (Crucial Access Management System)
or contact the customer service center for how to fix the
error.
Facial Recognition
Stand at a distance of 50–60 cm (19.6-23.6 in) from the product,
and look at the face camera. Adjust your face so it is parallel to
the camera. The face camera will recognize your face and the face
mode icon will blink blue.
50-60 cm
You can lower or lift your chin to adjust your eye level to the face
camera.
•For better recognition, face forward and lower or lift your chin.
•Facial recognition may fail:
- when it is too bright or too dark, or the surface of product
is dirty.
- when you change your appearance by wearing a hat,
glasses, heavy make-up or other accessories.
Palm Vein Recognition
Spread your fingers and place your hand perpendicularly to the
palm vein sensor. Align the center of your palm with the center of
the sensor. Then move your hand slowly and place it 3.5-7 cm (1.3-
2.7 in) from the product. The palm vein sensor will scan your palm
and the mode icon will blink blue.
Remain still while your palm vein is being scanned.
3.5-7 cm
It is a touchless authentication system. Do not touch the sensor
with your hand.
Using Product