CrucialTrak BACS Tube Instruction manual

Components
Be sure that all components are included in the package. If an item
is missing, ask a sales representative at the store where it was
purchased, or contact us by visiting www.crucialtrak.com.
BACS Tube Interface cable
Screw (M3 × 5 mm, 4 pcs) Standard nylon cable ties (2 pcs)
BFT-A001 Ι Quick User Guide
Rev 1.0 Ⅰ Sep. 2018
Read this quick user guide and use the product correctly.
Refer to the manual for detailed information of the product usage and
precautions.
Manual Monitor mount bracket
•Design of the monitor mount bracket may vary depending on
the monitor being used with the product.
•Although a monitor mount bracket is one of the components,
it is not included in the package. Monitor mount brackets
are manufactured separately according to customers’
specifications.
Name of Each Part
Becoming familiar with the names of these products will be helpful
when installing or using the product.
Status
light
User ID
display
Face
camera
Mount
bracket
Mode icon ToF
sensor
Iris
camera
Iris light
•The effective distance of the ToF Sensor (Time of Flight:
distance imaging sensor) is up to 1 m (3.2 ft).
•The front surface of the product reflects user’s face and can
be used as a mirror to ensure user is in the proper position for
recognition.
BFT-A001 Ι Quick User Guide
Rev 1.0 Ⅰ Sep. 2018
Copyrights © 2018 All Rights Reserved by CrucialTrak Inc.
All programs, data files, and content of BACS™ Tube and this manual
are protected by a non-disclosure agreement. Usage, copy, and
distribution to third parties are strictly prohibited unless it is allowed
explicitly by CrucialTrak.
If you have any suggestions or inquiries about the products of
CrucialTrak, email us at [email protected].
For troubleshooting and additional information, visit CrucialTrak’s
web page (www.crucialtrak.com).
Read this quick user guide and use the product correctly.
Refer to the manual for detailed information of the product usage and
precautions.
US HEADQUARTERS Houston, USA
820 Gessner Rd, Suite 1275, Houston, Texas 77024
Phone: [phone]
Email: [email protected]
KOREA HEADQUARTERS AND R&D CENTER
CrucialTec Pangyo, Floor 5, 62 Pangyo-ro 255, Bundang, Seongnam, Korea 13486
Phone: [phone] Fax: [phone]
Email: [email protected]

You can identify yourself easily with the biometrics registered in the
product. Unregistered data cannot be used for authentication.
1. The status light will turn white as the ToF sensor detects you
when you come within 1 m (3.2 ft) range of the product.
2. Use your biometric data (face and iris).
When the product is not in use, the status light will blink and
the product will automatically switch to standby mode.
3. Verify whether or not the authentication was successful.
•When authenticated, the status light will turn green, the
mode icon will turn on, and the user ID will appear on the
display.
•When authentication has failed, the status light will turn red.
•When an error occurs, the mode icon will blink.
•Refer to CRUAMS (Crucial Access Management System) or
contact the customer service center for how to fix the error.
Facial Recognition
Stand at a distance of 60-100 cm (23.6-39.3 in) from the product,
and look at the face camera. Adjust your face so it is parallel to the
camera. Make sure the iris camera is between your eyes by using
the front surface mirror.
60-
100 cm
You can adjust the angle by pushing or pulling on the body of the
product. Be careful not to adjust it forcibly as connecting parts
between the product and the mount bracket may break.
•For better recognition, face forward and lower or lift your chin.
•Facial recognition may fail:
- when it is too bright or too dark, or the surface of product
is dirty.
- when you change your appearance by wearing a hat,
glasses, heavy make-up or other accessories.
Iris Recognition
Stand at a distance of 30–40 cm (11.8-15.7 in) from the product,
and look at the face camera. Adjust your face so it is parallel to the
camera. Make sure the iris camera is between your eyes by using
the front surface mirror. Look at the camera for 1–3 seconds. The
iris light will turn red when your irises are recognized.
30-
40 cm
You can adjust the angle by pushing or pulling on the body of the
product. Be careful not to adjust it forcibly as connecting parts
between the product and the mount bracket may break.
•For best results, adjust your face so it can be parallel to the
camera and open your eyes wide.
•Scanning irises may fail:
- when it is too bright or too dark, or the surface of product
is dirty.
- when the irises are hard to scan due to glasses, contact
lenses, blepharoptosis, or eye surgery.
•If it cannot scan your irises while you are wearing glasses or
contact lenses, take them off and try again.
Using Product