Crux 7 speed blender User manual

7 Speed Blender
Instruction Manual
Styled for Life
Designed & Engineered in New York City

Important Safeguards.................................................................................................................2-3
Additional Important Safeguards..............................................................................................4
Notes on the Plug .............................................................................................................................5
Notes on the Cord ............................................................................................................................5
Plasticizer Warning...........................................................................................................................5
Electric Power.....................................................................................................................................5
Getting to Know Your CRUX 7 Speed Blender....................................................................6
Control Panel ..................................................................................................................................7-9
Before Using for the First Time ..................................................................................................9
Operating Instructions.............................................................................................................10-11
Function Selection Guide............................................................................................................ 12
User Maintenance Instructions.................................................................................................. 13
Care & Cleaning Instructions ..................................................................................................... 13
Storing Instructions........................................................................................................................ 14
Troubleshooting...............................................................................................................................14
Recipe Guide................................................................................................................................15-21
Warranty......................................................................................................................................22-23
Table of Contents

2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed including the following:
1. READ ALL INSTRUCTIONS.
2. To protect against risk of electrical shock do not put cord, plugs,
or appliance in water or other liquid.
3. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliances by
a person responsible for their safety.
4. Close supervision is necessary when any appliance is used by
or near children.
5. This CRUX 7 Speed Blender is not a toy. Children should be
supervised to ensure they do not play with the appliance.
6. Unplug from outlet when not in use, before putting on or taking
off attachments and before cleaning.
CAUTION: AVOID CONTACT WITH MOVING PARTS.
7. Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or it is dropped, or has been damaged in
any manner. Contact Consumer Service for examination,
repair or adjustment.
8. The use of attachments, including canning jars, not recommended
by the manufacturer may cause a risk of injury to persons.
9. Do not use outdoors.

3
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surfaces, including the stove.
12. Blades are sharp. Handle carefully. Use the blade’s collar to handle.
13. Do not blend hot liquids.
14. Always completely assemble the stainless steel blade collar to the jar
before adding food to be processed.
15. Always completely assemble stainless steel blade collar to the jar
before placing on the motor base.
16. Never use the CRUX 7 Speed Blender jar to process food without
the lid and lid cap properly locked in place.
17. Never place any CRUX 7 Speed Blender attachments into a
microwave oven.
18. Keep hands and utensils out of the jar while blending to reduce
the risk of severe injury to persons or damage to the unit.
19. Blades are sharp. Handle carefully. Always manipulate the blades by
their collar (base).
20. Always operate the blender with its cover in place.
21. Never add ingredients to the jar while the appliance is operating.
22. The jar must be properly assembled and in place before operating
the appliance.
FOR HOUSEHOLD
USE ONLY
SAVE THESE INSTRUCTIONS

4
ADDITIONAL IMPORTANT
SAFEGUARDS
1. All users of this appliance must read and understand this instruction
manual before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC
electrical outlet only.
3. If this appliance begins to malfunction during use, immediately
press the ON/OFF function or the function actively in use (with
illuminated indicator light) and unplug the cord. Do not use or
attempt to repair the malfunctioning appliance.
4. If this appliance falls or accidentally becomes immersed in water,
unplug it immediately. Do not reach into the water!
5. Do not use this appliance after it has fallen into or becomes
immersed in water.
6. To reduce the risk of injury to persons or property, never use this
appliance in an unstable position
7. Do not use this appliance for other than its intended use.
8. Do not use if the jar is cracked or chipped.
IMPORTANT: Do not overfill. Never fill ingredients beyond the jar’s
MAX line.
WARNING: Failure to add enough liquid before processing may cause
the jar to break or chip.
WARNING: To avoid spills, make sure the lid is properly locked in place
on the jar with the lid cap in position before pressing any SPEED
or PRE-PROGRAMMED buttons.

5
NOTES ON THE PLUG
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
NOTES ON THE CORD
The provided short power-supply cord should be used to reduce the
risk resulting from becoming entangled in or tripping over a longer
cord. An extension cord is not recommended for use with this product.
PLASTICIZER WARNING
CAUTION: To prevent Plasticizers from migrating to the finish of
the counter top or table top or other furniture, place NON-PLASTIC
coasters or place mats between the appliance and the finish of
the counter top or table top. Failure to do so may cause the finish
to darken; permanent blemishes may occur or stains can appear.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances,
your appliance may not operate properly. It should be operated
on a separate electrical circuit from other appliances.

6
Getting To Know Your CRUX 7 Speed Blender
Product may vary slightly from illustration
1. 2 oz Measuring Cap
2. Jar Cover
3. 50 oz Tritan Jar
4. Stainless Steel Blades
5. Motor Base
6. Control Panel
7. Polarized Plug
8. Cord Storage
(not shown)
9. Non-Skid Feet
12
3
4
5
6
7
8
9
Fig. 1

7
1. On/Off
2. Low
3. High
4. Pulse
5. Purée
6. Liquefy
7. Ice Crush
8. Smoothie/Auto Clean
1
23
6
5
4
7
8
Control Panel
The control panel consists of the ON/OFF button, 2 SPEED buttons (LOW or HIGH) and
PULSE as well as 4 PRE-PROGRAMMED buttons. All functions have indicator lights that
illuminate when active.
ON/OFF
• Press to turn the unit ON or OFF.
•
Press this button before starting any of the 7 functions as well as to stop any operation.
LOW
• Select the low setting to blend ingredients to the desired consistency when low speeds
are required. Once blending has commenced, press low again to stop operation.
HIGH
• Select the high setting to blend ingredients to the desired consistency when faster
speeds are required. Once blending has commenced, press high again to stop operation.
Fig. 2

8
PULSE
• This function blends ingredients through controlled pulses. This setting helps dislodge
ingredients clumped around the blade and at the bottom of the jar.
• Press this button to initiate the pulse blending function, for short bursts of power. Pulse
is activated as long as the button is pressed and will cease once the button is released.
• For best results, time the pulses to ensure that blades come to a complete stop before
beginning the next pulse.
PURÉE
• This setting allows you to purée fruits and vegetables and prepare smooth soups and
spreads. All ingredients should be blended cold or at room temperature.
• When processing food, ensure that sufficient liquid is added to create a smooth and
even consistency. Add small amounts of stock, yogurt, milk or water until the desired
consistency is achieved.
• This is a preset setting. The blending process will finish once the preset program has
been completed.
LIQUEFY
• Ideal for blending soups and thicker ingredients. When the liquefy button is pressed,
the unit will begin to blend at a lower speed, then progressively increase to blend
at a higher speed.
• Ideal setting for preparing soups and blending thicker or denser foods.
• This is a preset setting. The blending process will finish once the preset program has
been completed.
ICE CRUSH
• Quickly crushes up to 10 ice cubes and is perfect for preparing frozen drink recipes such
as margaritas and daiquiris.
• This is a preset setting. The blending process will finish once the preset program has
been completed.

9
SMOOTHIE/AUTO CLEAN
• Blends fruits and vegetables into a perfect smoothie. Refer to the recipe section for
suggested smoothie recipes.
• For cleaning the jar and blade, fill with water to the max line and add a small amount
of liquid dish soap. Press the function and let operation continue until it automatically
stops. Rinse out the contents with warm water and add room temperature water until
the max line and run once again. Place upside down on rack to dry.
• Always clean immediately after use to prevent food from hardening. If food still remains
in the jar or blade once the auto clean process has been completed, remove the blade
system by turning the collar of the blade counterclockwise until loose. Clean the blade
separately with warm water and soap and then place it back onto its position at the base
of the jar turning clockwise for assembly. The blade is top rack dishwasher safe.
• DO NOT PLACE THE JAR IN THE DISHWASHER.
• This is a preset setting. The blending process will finish once the preset program has
been completed.
Before Using for the First Time
Carefully unpack the CRUX 7 Speed Blender and remove all packaging materials. Check
the contents to ensure that all attachments (50 oz. jar, lid, lid measuring cap and blending
blade) are present (see Figure 1), and have been received in good condition.
1. Handle stainless steel blending blade by the collar only.
WARNING: Do not touch blades. Blending blades are very sharp. Use extreme care when
handling. Failure to do so can result in personal injury.
2. Wash the jar, lid, lid cap, and stainless steel blade in warm, soapy water before first use.
Rinse thoroughly.
3. Wipe the motor base with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.

10
Operating Instructions
1. Place the motor base on a flat, clean, dry counter top or table.
2. Make sure the unit is unplugged.
JAR ASSEMBLY
1. Using the blade’s collar to handle, place stainless steel blending blade into the base of
the jar (See Figure 4). Holding the jar handle, screw the blade into the jar by turning it
counterclockwise.
2. Always check to be sure the blade collar is properly fitted into the jar before use.
3. To avoid spills, ensure that the lid is firmly secured to the jar. Press the lid down on the
top portion of the jar until it rests firmly in place. Place the measuring cap into the center
of the lid and twist clockwise to secure it safely in place. Use the measure cap to measure
and add ingredients prior to commencing any operation.
4. Add ingredients into the jar.
NOTE: When blending, foods or liquids tend to expand as they rise up the side of the jar.
Do not fill jar past its max line.
WARNING: Pay close attention while processing. Never operate the CRUX 7 Speed
blender when the jar is empty.
IMPORTANT: Make sure the blade collar is properly attached and tightened in the base of
the jar before adding food for processing.
Fig. 3 Fig. 4
MAX
1
2
3
1. 50 oz Tritan Jar
2. Stainless Steel Blades
3. Blade Collar
Never fill jar
beyond the
MAX line

11
IMPORTANT! Blending blade creates an airtight seal with the jar during processing.
Always check to be sure that the blade collar is properly fitted and tightened into the jar.
(See Figure 3.)
OPERATION
WARNING: Never overfill the jar. To avoid personal injury, leakage or damage to the CRUX 7
Speed Blender, make sure that ingredients do not surpass the max line.
1. Make sure the lid cap is in position in the lid.
2. Add the lid onto the jar. Press to seal. Check before blending.
WARNING: To avoid spills, make sure the lid is locked securely before pressing any
SPEED or PRE-PROGRAMMED buttons.
3. After adding ingredients to the jar, press the ON/OFF function to turn the blender on.
4. Press the desired SPEED or PRE-PROGRAMMED button to begin processing.
The indicator light will illuminate.
5. When using the PULSE function, the indicator light will illuminate when pressed.
The blender will STOP operating and the light will turn off when the button is released.
6. When blending HIGH or LOW SPEED, press the ON/OFF button to STOP blending when
desired consistency is reached. These functions will run for 1 minute if the user has not
pressed the activated button to end operation.
7. The functions: PURÉE, LIQUEFY, ICE CRUSH, SMOOTHIE/AUTO CLEAN are
PRE-PROGRAMMED and will STOP automatically when their cycle is complete. Simply
press the active button (with illuminated indicator light) or the ON/OFF button to STOP
when the desired consistency is reached. Check results and if necessary, stir in liquid,
water, juice or stock to thin puréed food until the desired consistency is reached.
WARNING: Do not operate the motor continuously for more than 1 minute at a time.
8. After processing food in the jar, pull the lid up and off jar to remove.
The spouted jar makes pouring easy.
HINT! A small spatula is helpful for removing thicker processed foods.
9. Unplug the CRUX 7 Speed Blender when not in use and before cleaning.

12
Function Selection Guide
INGREDIENT/RECIPE FUNCTION DESCRIPTION
Pudding, Pie Filling, Custard PULSE or LOW Thick and creamy
Bread, Stale Bread, Crackers,
Cookies (1/2 inch pcs, 1 cup batches)
PULSE or LOW Coarse to fine crumbs
Nuts
(shelled, 1⁄2 cup or less at a time) PULSE or LOW Coarse to fine chopped nuts,
chopped nuts for baking
Nuts
(shelled, 1⁄2 cup or less at a time)
Homemade Nut Flours, Meals,
Nut Butter
ICE CRUSH Fine ground nut flours, nut meals.
Fresh preservative-free
nut butters
Mayonnaise, Salad Dressings, Salsas LOW Thick and creamy, blended
and emulsified
Pancake/Waffle Batter, Omelets LOW Light and fluffy
Cream, Egg Whites HIGH Thick and frothy
Milk Shakes HIGH Smooth and creamy
Smoothies, Drinks SMOOTHIE Smooth, thick & creamy
and health drinks
Vegetable Purée PURÉE Smooth and creamy
Crush Ice
(up to 10 cubes) ICE CRUSH Coarse crush to snowy
Frozen Cocktails ICE CRUSH Thick and slushy
Dips, Appetizers ICE CRUSH Auto program is perfect for
leafy recipes
Almond Milk, Coconut Milk,
Soy Milk
LIQUIFY Unfiltered for cooking.
Filter for drinking
Fresh Fruit Drinks LIQUIFY Thick and pulpy

13
BLENDER NOTES:
• When using the PULSE function, the operation will STOP when the button is released.
• When blending HIGH or LOW SPEED, press ON/OFF button or the active speed
to stop blending.
• Functions: PURÉE, LIQUEFY, ICE CRUSH, SMOOTHIE/AUTO CLEAN are
PRE-PROGRAMMED and will STOP automatically when their cycle is complete.
To interrupt function, press ON/OFF button to STOP.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to
repair it yourself. Contact the customer service department for any unusual issues you may
experience.
Care & Cleaning Instructions
CAUTION: Never immerse the motor base, plug or cord in water or any other liquid.
1. Always unplug the CRUX 7 Speed Blender before cleaning.
2. Rinse jar, lid, lid cap, and stainless steel blade collar immediately after processing to make
cleanup easier.
3. Always use blade collar to handle when moving or adjusting blades.
CAUTION: Use extreme care when handling blades. Do not touch the blades with your
fingers. The blades are very sharp and can cause injury if touched.
4. For quick clean-ups in between batches, fill the jar until the max line with clean,
warm water. Press the AUTO CLEAN button. When the function is complete,
the indicator light and the blender will turn OFF. Rinse jar and blade.
Rinse lid and lid cap separately.
5. If necessary, soak blades in soapy water for 10 to 15 minutes. Use a small nylon bristle
brush to remove processed food from the blade and the blade area.
CAUTION: Never use rough scouring pads or abrasive cleansers on any plastic or metal
parts as the surface may be damaged.
6. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.

14
Storing Instructions
1. Unplug and clean unit.
2. Store in original box or in a clean, dry place.
3. Never store the CRUX 7 Speed Blender while it is hot or plugged in.
4. Never wrap cord tightly around the appliance. Never place any stress on cord, especially
where the cord enters the motor base, as this could cause the cord to fray and break.
5. There is a cord storage area in the back of the unit’s base. Push the cord gently in that
area for storage.
Troubleshooting
PROBLEM CAUSE SOLUTION
The blender motor
rotates very slowly.
Jar is overloaded. • Remove some food from the jar
and continue blending. Ensure that
ingredients do not surpass the max line.
• Add liquid to the jar and continue
blending.
Ingredients are not
mixing together
well.
Heavier ingredients
have fallen to the
bottom.
• If necessary, remove jar and shake
ingredients to re-distribute. Continue
blending.
• If the purée is still not blended smooth,
it may be necessary to add liquid to the
jar and continue blending.
The blender has
stopped operating.
The motor is
overloaded and
stopped functioning
to prevent damage.
• The blender has a resettable fuse.
Unplug the unit and let it cool for
25 minutes. Reduce the load of
the jar and clear any jams.
Commence operation again
as indicated in the operation section.

15
Recipes
Kale & Black Bean Dip
Makes 3 cups
• 1-1/2 cups fresh kale, stemmed,
cut into 1” ribbons
• 1/2 cup fresh cilantro
(may substitute flat leaf parsley)
• 1/4 red or white onion, chopped
• 1/2 cup salsa
• 1 (15.5 oz) can low-sodium black beans,
drained & rinsed
• 1 large garlic cloves, coarsely chopped
• 1 tablespoon fresh lime juice
• 2 teaspoons ground cumin
• 1 teaspoon red chili powder
• salt and freshly ground black pepper
to taste
• 1 cup chopped fresh tomatoes, to serve
1. Add the kale and cilantro to the jar first.
2. Press PULSE and release 2 or 3 times until the leaves are chopped into small pieces.
3. Add the remaining ingredients to the jar.
4. Place 1/2 can black beans into the jar and reserve the rest in a medium mixing bowl.
5. Add the remaining ingredients to the jar.
6. Press the ICE CRUSH button to begin processing. When finished, the blender will
cease operation.
7. In a medium bowl, use a potato masher to crush the reserved beans. Do not over-mash.
The chunkiness of the hand-mashed beans will thicken and add texture to the rest of the
dip. Add the dip from the blender and mix well.
8. Serve topped with fresh chopped tomatoes. Great for serving with nachos.

16
White Bean & Spinach Avocado Dip
Makes: 2 cups
• 1-1/2 cups fresh spinach leaves
• v1/3 cup fresh cilantro (may substitute
flat-leaf parsley)
• 1 (15-oz.) can cannellini beans, rinsed and
drained
• 1 large avocado, seeded, peeled
• 1/2 lemon, peeled and zested
• 1/4 cup water
• 2 tablespoons extra-virgin olive oil
• 1 clove garlic, minced
• 1/2 teaspoon salt, plus extra, to taste
• 2 teaspoons ground cumin
• 8 dashes Tabasco sauce
1. Add the spinach and cilantro to the jar first.
2. Press PULSE and release 2 or 3 times until the leaves are chopped into small pieces.
3. Add the remaining ingredients to the jar.
4. Press the ICE CRUSH button to begin processing. When finished, the blender will
cease operation. Add more water, if needed to process.
5. Season with salt and pepper.

17
Sunflower Kale Pesto
Makes: 3 cups
• 2 cups fresh kale, stems removed
• 1/2 cup fresh basil
• 2 large garlic cloves, chopped
• 1/4 cup unsalted roasted sunflower seeds
• 1/2 cup grated Parmesan
or Pecorino cheese
• 1 lemon, juiced and zested
• 1/2 teaspoon Kosher salt, to taste
• 2 tablespoons water
• 1/2 cup extra-virgin olive oil, plus more
if needed
1. Add the kale and basil in small handful portions into the jar.
2. Press PULSE and release 2 or 3 times until the leaves are chopped into small pieces.
Keep adding a handful of kale and basil until they are roughly chopped.
3. Add the remaining ingredients to the jar in the order listed.
4. Press the SMOOTHIE button to begin processing. When finished, the blender will
cease operation.
NOTE: If pesto is too thick, add water or olive oil and mix well.

18
Antioxidant-Rich Super Blue Juice
Makes 3 cups
• 2 ice cubes, if a thicker smoothie
is desired
• 1 cup frozen blueberries
• 1 fresh pear, quartered
• 1 orange, peeled and quartered
• 1 lime, juiced and zested
• 1/2-inch piece of ginger, peeled
• 1 tablespoon organic chia seeds
• 1/2 cup water
1. Add the ingredients to the jar in the order listed.
2. Press the SMOOTHIE button to begin processing. When finished, the blender will
cease operation. Add more water, if needed to process.
Ginger Carrot Salad Dressing
Makes: 1-1/2 cups
• 3 medium carrots, cut into chunks
• 1 shallot, peeled, cut in half
• 2-inch piece ginger root, peeled
• 2 tablespoons red balsamic vinegar
• 1 tablespoon roasted sesame seed oil
• 4 tablespoons extra-virgin olive oil
• 6 tablespoons water
1. Add the ingredients to the jar in the order listed.
2. Press the ICE CRUSH button to begin processing. When finished, the blender will
cease operation. Add more water, if needed to process.