CTA ADD-CPOLEGN User manual

Extended Pole C-Clamp VESA Mount
with Flexible Gooseneck
ADD-CPOLEGN
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
888-733-4448
1A. Place a plastic washer (E) in between
the gooseneck adapter (B) and gooseneck.
Align and assemble.
1B. Place a plastic washer (E) followed by
a metal washer (D) over the gooseneck end
adapter, and rotate in screw nut (C) with
fingers initially.
1C. Use the socket wrench (F) to tighten it
securely.
1. Connecting VESA plate to the gooseneck :
x1
C
Nut
x1
A
x1
E
x2
x1
x1
D
x1
E
A
B
F
2. Connecting VESA gooseneck with pole :
2A. Screw on the gooseneck (B) onto the base body
pole (H) by turning clockwise. Shown above.
2B. Rotate Y-Screw to tighten gooseneck to pole.
Shown above.
B
H
Y Screw
Metal Connection
Y Screw
B
DC
E
Note: Make sure Y-Screw is
loosened before rotating on
gooseneck.
B
FG
x1
H

888-733-4448
3A. Align C-Clamp hole (G) at the connection piece of pole (H) and turn it in until secured. As shown above.
3. Installing C-Clamp to Pole :
4A. Rotate knob counter-clockwise to loosen the clamp for a
thicker clamped installation. As shown above.
4B. Rotate knob clockwise to tighten the clamp for a thinner
clampled installation. As shown above.
4. Adjusting C-Clamp :
5. Adjusting gooseneck and Rotation :
5A. Flex the Gooseneck (B) with your hands to your preferred setup. 5B. Rotate the VESA Plate (A) clockwise to adjust orientation.
B
B
A
Multi
Direction
Flexing
H
G
G