Cub Crafters CC11-100 User manual

Cub Crafters, Inc. Considers Compliance Mandatory
NOTIFICATION NB00002 Rev A Page 1 of 3
Form #: EN-501 03-27-05
EFFECTIVE DATE: This NOTIFICATION is effective May 14, 2007.
SUBJECT: Aft Seat Strap Routing.
MODELS AFFECTED: All CC11-100 and CC11-160
COMPLIANCE TIME: Upon receipt and at each annual inspection.
PURPOSE: Ensure correct routing of aft seat straps.
INSTRUCTIONS:
1. It is important to ensure that after removal and re-installation of the aft seat, the straps that
attach the seat to the fuselage are routed around the fuselage tubes and through the slide
adjuster as shown in Figures 1 and 2.
2. Also, verify the straps are wrapped around the fuselage tubes in the correct location. Figure 3
shows the proper location for S/N CC11-00001 through CC11-00087. Figure 4 shows the
strap location for S/N CC11-00088 to current.
Figure 1 - Strap Routing around Fuselage Tube

Cub Crafters, Inc. Considers Compliance Mandatory
NOTIFICATION NB00002 Rev A Page 2 of 3
Form #: EN-501 03-27-05
Figure 2 - Side View of Strap Routing
Figure 3 - Strap Location for CC11-00001 through CC11-00087
Route Strap Forward of
P
late

Cub Crafters, Inc. Considers Compliance Mandatory
NOTIFICATION NB00002 Rev A Page 3 of 3
Form #: EN-501 03-27-05
Figure 4 - Strap Location for CC11-00088 through Current
Route Strap Forward
of Stop Bar