CUBO CUB-2DRW User manual

For assembly advice or parts email [e-mail] or call 0800 710 1010
The CUBO Collection
CUB-2DRW / DOOR
Installation Instructions
Stash, store and show off in style!.
Congratulations on the purchase of your CUBO insert unit.
Make life simple with the ultra-versatile Cubo collection. Display, store, divide spaces, and more with this multi-
functional range.
If you have any questions please email in[email protected]o.nz or call 0800 7 10 10 10.
TOOLS REQUIRED: Size 2 Pozi-screwdriver or simple battery screwdriver.
10 YEAR GUARANTEE
The Cubo Collection carries a 10 year guarantee against defective material or workmanship, excluding misuse and
normal wear and tear. Obviously, as this unit is customer-assembled we cannot guarantee cabinet failure or damage
from incorrect assembly. All claims need proof of purchase –to ensure this register your CUBO unit at
www.platform10.co.nz.
Follow the installation instructions carefully and take note of the precautions below.
•Avoid direct sunlight wherever possible.
•Keep cabinet in a dry place.
•Wipe off spilt liquids immediately.
•Avoid placing hot items directly on the surface.
•To clean, wipe with a clean, slightly damp cloth and buff dry with a soft dry cloth - microfibre is
ideal.
•Do not allow nail polish, removers, deodorant or other damaging chemicals to come into contact
with the surface.

For assembly advice or parts email [e-mail] or call 0800 710 1010
STEP ONE: Remove the drawers/door from the unit. Also remove any white cover stickers from the
inside of the cell you are about to put the unit into.
STEP TWO: Insert the unit into the Cubo frame until the back edge of the unit is flush with the back edge
of the shelf.
STEP THREE: Use the gold screws provided to screw into place. Guide holes are pre-drilled, these may
take a bit for force to screw into the Cubo frame.
STEP FOUR: Replace the drawers/door back into the unit. Unscrew the handles(s) from the rear face of
the drawers/door and re-screw them on the front face.
CONGRATULATIONS, your CUBO insert unit is now complete.
THANK-YOU FOR SUPPORTING NEW ZEALAND MADE FURNITURE