3
Safety Warnings
www.cuddleco.co.uk
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not
be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or
cords and should be placed either tight to any wall or have a gap of 300mm between the wall
and the side of the bed.
The lowest base position is the safest and should always be used as soon as the baby is old
enough to sit up. When the child is able to climb out of the cot, the cot shall no longer be used
for that child.
When converted into a toddler bed, this product is suitable for children aged from 18 months up
to 4 years old. The bed is designed to be dismantled for storage or transportation.
The length and width of the mattress used shall be such that the gap between the mattress and
the sides and ends shall not exceed 30mm.
Wood is a natural material and will darken and change appearance over time.
To clean your CuddleCo Cot bed use warm water and a clean cloth. Thoroughly dry the area
once you have cleaned it. Do not use detergents or bleach. Do not use bleach, abrasive
substances or materials.
WARNING: PLEASE NOTE THAT THE RECOMMENDED
MATTRESS SIZE FOR THIS COT BED IS 140CM X 70CM X 10CM.
DO NOT USE MORE THAN ONE MATTRESS IN THIS COT BED.
THE COT BED COMPLIES WITH
BS EN 716 -1:2017 AND BS 8509: 2008. MADE IN POLAND.
CUDDLECO UK, M16 9HQ
2Safety Warnings
www.cuddleco.co.uk
Thank you for buying this CuddleCo Cot Bed.
The Cot bed has been tested to the following British standards:
In Cot mode – BS EN 716 -1 :2017.
In Toddler bed mode – BS 8509 : 2008 + A1 : 2011.
The paint is tested to EN 71 part 3 heavy metal content.
IT IS VITALLY IMPORTANT to follow the user guide step by step and to ensure that all fittings
are tightened appropriately. If you don’t do this, the product will not be assembled correctly and
could be dangerous.
Familiarise yourself with all parts by comparing them with the parts checklist on the next page.
Check the floor area in which you will assemble the furniture for any loose items that could
scratch or damage components. Use a protective sheet.
Please take note of the following WARNINGS:
WARNING: A child’s safety is your responsibility.
WARNING: Assembly should be carried out by a competent adult only.
WARNING: Do not use more than one mattress in the cot bed.
WARNING: Do not use the child’s bed near heat sources, windows and other furniture.
WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric
bar fires, gas fires, etc. in the near vicinity of the cot bed;
WARNING: Do not use the child’s bed if any part is broken, torn or missing and use only spare
parts approved by the manufacturer.
WARNING:Do not leave anything in the cot or place the cot close to another product, which
could provide a foothold or present a danger of suffocation or strangulation, e.g. strings,
blind/curtain cords.
The recommended mattress for this cot bed is 140cm x 70cm x 10cm.
Choose a mattress that has a thickness that allows the internal height (surface of the mattress
to the upper edge of the cot frame) to be at least 500mm in the lowest position of the cot base
and at least 200mm in the highest position of the cot base.
All assembly fittings should always be tightened properly, checked periodically and retightened
where necessary.
PLEASE KEEP FOR FUTURE REFERENCE AND
READ THIS DOCUMENT CAREFULLY
